CAT-SET

DRILLING | APX™ Drill: Deep Hole / Large Diameter Replaceable Insert Drilling System

33 Series: 33.00 mm - 37.99 mm (1.2991" - 1.4958") Holders

Straight Shank

Body

Shank

L 2

L 3

L 1

L 5

D 2 40 40 40 40

P 1

Length

Part No.

W3303H-40FM W3305H-40FM W3308H-40FM W3310H-40FM W3303H-150F W3305H-150F W3308H-150F W3310H-150F

3xD 5xD 8xD 3xD 5xD 8xD 10xD 10xD

131.4 207.4 321.4 397.4 5.174 8.166

167.4 243.4 357.4 433.4 6.590 9.582

237.4 313.4 427.4 503.4 9.278

70.0 70.0 70.0 70.0

1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT

2.688 2.688 2.688 2.688

1-1/2 1-1/2 1-1/2 1-1/2

12.270 16.758 19.750

12.654 15.646

14.070 17.062

A50

CAT Integral Shank

Body

L 2

L 9

Length

Shank CAT40 CAT40 CAT40 CAT40 CAT50 CAT50 CAT50 CAT50

Part No.

W3303H-CV40 W3305H-CV40 W3308H-CV40 W3310H-CV40 W3303H-CV50 W3305H-CV50 W3308H-CV50 W3310H-CV50

3xD 5xD 8xD 3xD 5xD 8xD 10xD 10xD

5.174 8.166 12.654 15.646 5.174 8.166 12.654 15.646

7.473 10.465 14.953 17.945 7.473 10.465 14.953 17.945

ConnecƟon Accessories

MounƟng Screw

MounƟng Screw Driver

Admissible Tightening Torque*

75020-IP20-1 678 N-cm (60 in-lb) *Tightening torques are calculated with a fricƟon coefficient of µ = 0.14 and develop 90% of ulƟmate yield strength. 8IP-20

Refer to Speed and Feed charts for recommended adjustments to speeds and feeds and page A50: 34 for deep hole drilling guidelines in this secƟon of the catalog. Visit www.alliedmachine.com/DeepHoleGuidelines for the most up-to-date informaƟon and procedures. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department : appeng@alliedmachine.com . WARNING

MounƟng screws sold in mulƟples of 4. = Metric (mm) = Imperial (in)

www.alliedmachine.com | 1.330.343.4283

A50: 8