CAT-SET

DRILLING | APX™ Drill: Deep Hole / Large Diameter Replaceable Insert Drilling System

44 Series: 44.00 mm - 50.99 mm (1.7321" - 2.0076")

Holders

Straight Shank

Body

Shank

L 2

L 3

L 1

L 5

D 2 40 40 40 40 50 50 50 50

P 1

Length

Part No.

W4403H-40FM W4405H-40FM W4408H-40FM W4410H-40FM W4403H-50FM W4405H-50FM W4408H-50FM W4410H-50FM W4403H-150F W4405H-150F W4408H-150F W4410H-150F W4403H-200F W4405H-200F W4408H-200F W4410H-200F

3xD 5xD 8xD 3xD 5xD 8xD 3xD 5xD 8xD 3xD 5xD 8xD

169.7 271.7 424.7 526.7 169.7 271.7 424.7 526.7 6.681

216.9 318.9 471.9 573.8 216.9 318.9 471.9 573.8 8.538

286.9 388.9 541.9 643.8 296.9 398.9 551.9 653.8

70.0 70.0 70.0 70.0 80.0 80.0 80.0 80.0

1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT

10xD

10xD

11.226 15.242 21.265 25.280 13.038 17.054 23.077 27.092

2.688 2.688 2.688 2.688 4.500 4.500 4.500 4.500

1-1/2 1-1/2 1-1/2 1-1/2

A50

10.697 16.720 20.735 6.681 10.697 16.720 20.735

12.554 18.577 22.592 8.538 12.554 18.577 22.592

10xD

2 2 2 2

10xD

CAT Integral Shank

Body

L 2

L 9

Length

Shank CAT40 CAT40 CAT40 CAT40 CAT50 CAT50 CAT50 CAT50

Part No.

W4403H-CV40 W4405H-CV40 W4408H-CV40 W4410H-CV40 W4403H-CV50 W4405H-CV50 W4408H-CV50 W4410H-CV50

3xD 5xD 8xD 3xD 5xD 8xD 10xD 10xD

6.681 10.697 16.720 20.735 6.681 10.697 16.720 20.735

9.253 13.269 19.292 23.307 9.253 13.269 19.292 23.307

ConnecƟon Accessories

MounƟng Screw

MounƟng Screw Driver

Admissible Tightening Torque*

75020-IP20-1 678 N-cm (60 in-lb) *Tightening torques are calculated with a fricƟon coefficient of µ = 0.14 and develop 90% of ulƟmate yield strength. 8IP-20

Refer to Speed and Feed charts for recommended adjustments to speeds and feeds and page A50: 34 for deep hole drilling guidelines in this secƟon of the catalog. Visit www.alliedmachine.com/DeepHoleGuidelines for the most up-to-date informaƟon and procedures. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department : appeng@alliedmachine.com . WARNING

MounƟng screws sold in mulƟples of 4. = Metric (mm) = Imperial (in)

www.alliedmachine.com | 1.330.343.4283

A50: 12