CAT-SET

DRILLING | RevoluƟon Drill®: Large Diameter Indexable Carbide Insert Drilling System

System Overview Setup InstrucƟons

Step 1: Mount the fixed cartridge and Ɵghten the mounƟng screw to 15-19 N-m (11-14 Ō-lbf).

Step 2: Finger-Ɵghten the mounƟng screw on the adjustable cartridge.

Step 3: Set the diameter using the adjustment screw against the mounƟng screw. Place the drill in a preseƩer to ensure the correct diameter seƫng.

Step 4: Tighten the mounƟng screw to 15-19 N-m (11-14 Ō-lbf).

A60

IC Inserts • The design allows for excellent chip control and aggressive penetraƟon rates. • The proprietary AM200® and AM300® coaƟngs increase tool life above compeƟtors’ premium coaƟngs. • The same inserts are used for both RevoluƟon Drill® and Opening Drill® products.

AM300®

AM200®

TiN

Insert ApplicaƟon RecommendaƟons Carbide Grade OpƟons P35 (C5)

General purpose carbide grade suitable for most applicaƟons. Common application in steels and stainless steels.

Toughest carbide grade. Provides the best combinaƟon of edge strength and tool life. Recommended for less rigid applications. Higher wear-resistant carbide suitable for abrasive material applicaƟons. Recommended for grey, ductile, and nodular irons.

K35 (C1)

K25 (C2)

AddiƟonal Geometry OpƟon High Rake (HR)

Provides superior chip control and tool life in long chipping carbon and alloy steels below 200 BHN.

A60: 5

www.alliedmachine.com | 1.330.343.4283