CAT-SET

DRILLING | Structural Steel SoluƟons | GEN3SYS® XT Pro Replaceable Insert Drills

GEN3SYS® XT Pro Structural Steel Drilling System

System Overview

GEN3SYS ® XT Pro ST

A91

STRUCTURAL STEEL ENHANCEMENTS

AM420

Improved Geometry Extends tool life and increases insert strength without increasing horsepower consumpƟon.

New Point Design Increases stability without hindering penetraƟon.

Redesigned Insert Provides consistent performance and adds durability.

AM420 CoaƟng Increases heat threshold and extends tool life.

Get the Consistency You Need

Tough Drilling is Tough No More Structural steel applicaƟons can prove to be difficult to machine, so you need a drill that’s been put through the fire to ensure it can conquer those challenging applicaƟons. Rigorous tesƟng and countless hours of design and programming make the XT Pro structural steel insert the opƟmal drill for structural steel applicaƟons. • Diameter range: 12.00 mm - 35.00 mm (0.4724" - 1.3780"). • Holders available in 1.5xD, 3xD, 5xD, and 7xD lengths. • Flanged shank with flat. The challenge of drilling structural steel materials is about to get easier. Developed through a rigorous and thorough tesƟng process, the modified and improved XTST insert is a product of innovaƟon. Achieve the consistent performance you need while matching or even exceeding your current parameters.

1.5xD

3xD

5xD

7xD

NOTICE: Structural steel GEN3SYS holders are specifically designed to be used only with GEN3SYS XT Pro structural steel geometry inserts. Using other GEN3SYS XT or XT Pro insert geometries in these holders could lead to chip packing and tool failure. Factory technical assistance is available through our ApplicaƟon Engineering department: appeng@alliedmachine.com .

A91: 25

www.alliedmachine.com | 1.330.343.4283