CAT-SET

PORTING | AccuPort 432® Port Contour CuƩers

Product Overview Replaceable Inserts Overview

T-A® Drill Insert Grades

HSS Super Cobalt (T-A / GEN2 T-A) Suited for good-to-rigid machining applicaƟons, used for drilling exoƟc and high-alloy materials, or general use when surface speed needs to be increased. For use in material hardness up to 350 BHN.

Carbide P40 (C5) (T-A) Excellent for drilling

Carbide K35 (C1) (T-A / GEN2 T-A) Excellent for drilling free-machining steels, low/ medium-carbon steels, alloy steels, high-strength steels, tool steels, and hardened steels.

Carbide K10 (C3) (T-A) Designed for drilling grey/ white cast irons. The special geometry offers substanƟal increase in penetraƟon rates and provides excepƟonal edge strength and tool life.

free-machining steel, low/ medium-carbon steels, alloy steels, high-strength steels, tool steels, and hardened steels.

A92

Port Form Inserts

GEN2 T-A Inserts

T-A Inserts

AM200®

TiAlN

AM300®

AM200®

TiN

GEN2 T-A®

T-A®

Standard • Offers substanƟal increases in penetraƟon rates and tool life. • Improves centering, drill stability, chip formaƟon, and lowers drill forces. • Provides smoother breakout on through-hole applicaƟons.

Standard • Offers excellent penetraƟon rates and tool life. • Smooth breakout on through holes. • Increases drill stability and chip formaƟon. • Ideally suited for low-to-high rigidity machining applicaƟons.

Made-to-Order Tool SpecificaƟons Scan and email a copy of the table below to Allied’s ApplicaƟon Engineering Department to receive pricing for a made-to-order AccuPort 432 Port

Contour CuƩer. Send emails to appeng@alliedmachine.com .

Tube Dash No.

Port Thread Size

D 1

L 13

D 5

L 10

L 1

D 2

L 7

SpecificaƟon

J1926 ISO 6149 ISO 6149 (no ridge) JDS-G173.1 AS5202

Company Name

Contact Name

Phone

Distributor Name

Fax

A92: 5

www.alliedmachine.com | 1.330.343.4283