CAT-SET

BORING | Master Shanks with MVS ConnecƟon

BT Master Shanks (JIS B 6339) Balanced

A

*X 1 : with one-piece clamping nut

Imperial (in)

MVS ConnecƟon

Shank

D 10

D 4 | D 3 40 - 22 50 - 28 40 - 22 50 - 28 63 - 36 ER 40

X 1

L 1

L 2

D 5

Taper Size

Weight (lbs)

Part No. 327012 327013 327016 327019 327020 259081* 327021 327029 ** 327036 ** 327030 ** 327037 ** 327031 ** 327038 ** 327032 ** 259082* 327022 327023 327024

1.575 1.811 1.811 2.126 2.520 2.755 2.559 8.071 8.071 2.953 8.858 8.858 2.953

0.710

— — — — —

— 1.102 — 1.323 — 2.425 — 2.646 — 3.307

30

M12 x 1.75

—

0.750 1.060 1.692 1.060 6.567 6.567 1.449 7.354 7.354 1.449 9.323 9.323 9.913 1.645 — —

40

M16 x 2

4.094

2.480

2.645

—

— 8.599

— 2.362 — 1.949

15.435 13.010

50 - 28

—

— 9.261

63 - 36

— 3.071

21.830

— — — — —

— 17.199 — 10.363 — 32.634 — 12.127 — 38.147 32.634

50

M24 x 3

80 - 36

10.827 10.827 3.543 11.417 3.149

— 3.543

100 - 56

ER 40

5.314

2.480

8.377

NOTE : Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg. *Balanced without clamping nut. **Available upon request.

B10: ix - x Key on B10-A: 2 NOTE: Factory technical assistance is available through our ApplicaƟon Engineering department: appeng@alliedmachine.com . -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter raƟo, which can impact tool stability and performance. For detailed guidelines on safe configuraƟons, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines . WARNING Assembly of modular components may cause machine damage and/or serious injury. To prevent:

= Metric (mm) = Imperial (in)

B10-A: 11

www.alliedmachine.com | 1.330.343.4283