CAT-SET

BORING | Master Shanks with MVS ConnecƟon

SK Master Shanks (DIN 69871-AD / B -D) Balanced

A

*X 1 : with one-piece clamping nut

Imperial (in)

MVS ConnecƟon

Shank

D 10

D 4 | D 3 40 - 22 50 - 28 32 - 18 40 - 22 50 - 28 63 - 36 80 - 36 ER 40 50 - 28 50 - 28*

X 1

L 1

L 2

D 5

Taper Size

Weight (lbs)

Part No. 327001 327002 327003 327004 327005 327006 327007 327017 327025 327033 327018 327026 327034 327010 327027 327035 327011 327028 259079 ** 259080**

1.811 2.283 2.165 1.811 1.811 2.598 2.598 3.149 1.811 7.323 7.323 2.205 8.110 8.110 2.205

1.059

— — — — — — — — — — — — — —

— 1.103 — 1.764 — 2.205 — 2.426 — 3.087 — 4.190 2.426 — 10.805 — 7.056 — 15.215 — 8.159 — 25.353 — 11.687 — 37.706 19.625 29.988 2.860 — 6.395 13.230

30

M12 x 1.75

—

1.413 1.059 1.059 1.846 2.397 1.059 6.571 6.571 1.453 7.358 7.358 1.453 9.327 9.327 —

— 1.575

40

M16 x 2

4.566

2.480

— 2.362

63 - 36

— 3.071

50

M24 x 3

80 - 36

10.079 10.079 3.543 11.417 3.149

— 3.543

—

100 - 56

10.665 2.173

ER 40

5.275

2.480

6.834

NOTE : Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg. * D 4 = 49.50 mm **Balanced without clamping nut.

NOTE: Factory technical assistance is available through our ApplicaƟon Engineering department: appeng@alliedmachine.com . -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter raƟo, which can impact tool stability and performance. For detailed guidelines on safe configuraƟons, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines . WARNING Assembly of modular components may cause machine damage and/or serious injury. To prevent:

B10: ix - x Key on B10-A: 2

= Metric (mm) = Imperial (in)

www.alliedmachine.com | 1.330.343.4283

B10-A: 14