CAT-SET

DRILLING | GEN3SYS® XT Pro and XT High PenetraƟon Replaceable Insert Drilling System

29 Series: 29.00 mm - 31.99 mm (1.1417" - 1.2597") GEN3SYS XT Pro Holders

A20

Body

Shank

Part No.

L 2

L 4

L 3

L 1

L 5

D 2

Flute

Length

With Flat

Cylindrical

HXT0329S-32FM HXT0329S-32CM HXT0529S-32FM HXT0529S-32CM HXT0729S-32FM HXT0729S-32CM HXT1029S-32FM HXT1029S-32CM

3xD 96.0 136.2 139.1 199.1 60.0 32 5xD 159.9 200.1 203.1 263.1 60.0 32 7xD 223.9 264.1 267.1 327.1 60.0 32 10xD 319.9 360.1 363.0 423.0 60.0 32 3xD 3.778 5.382 5.499 7.779 2.280 1-1/4 5xD 6.297 7.901 8.018 10.298 2.280 1-1/4 7xD 8.816 10.420 10.537 12.817 2.280 1-1/4 10xD 12.594 14.199 14.316 16.596 2.280 1-1/4

Straight

HXT0329S-125F HXT0529S-125F HXT0729S-125F HXT1029S-125F

HXT0329S-125C HXT0529S-125C HXT0729S-125C HXT1029S-125C

Straight

ConnecƟon Accessories

Nylon Locking Screws 7495N-IP15-1

Preset Torque Hand Driver

Admissible Tightening Torque* 690 N-cm (61.0 in-lbs)

Insert Screws 7495-IP15-1

Insert Driver

Replacement Tips

8IP-15

8IP-15TL

8IP-15B

*Tightening torques are calculated with a fricƟon coefficient of µ = 0.14 and develop 90% of ulƟmate yield strength.

Refer to Speed and Feed charts for recommended adjustments to speeds and feeds. Refer to page A20: 86 for deep hole drilling guidelines in this secƟon of the catalog. Visit www.alliedmachine.com/DeepHoleGuidelines for the most up-to-date informaƟon and procedures. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department : appeng@alliedmachine.com . WARNING

A20: 71 - 86

A20: 7 - 10

Key on A20: 2

Screws sold in mulƟples of 10. = Metric (mm) = Imperial (in)

www.alliedmachine.com | 1.330.343.4283

A20: 62