B20-CRT_US-EN

BORING | Criterion® Large Cri-Bore® Finish Boring / OD Turning System

Large Cri-Bore Finish Boring / OD Turning System Cri-Bore Boring Head / Optional Component Combinations

A

DRILLING

8

6

4

2

1010 12

0

18

14

16

B

Cri-Bore Micro Adjusting

Cri-Bore Micro Adjusting

BORING

8

6

4

2

1010 12

0

18

14

16

Counterbalance weight

Cri-Bore Micro Adjusting

C

REAMING

Extender Bar

D

Extension (optional)

BURNISHING

Shank

E

THREADING

X

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: - Refer to page B20: 57 to see formula for calculating weight of tool assembly. - Consult machine tool builder for machine's weight limitations. Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: - Do not exceed recommended 9xD length-to-diameter ratio or exceed 4 total components (including shank) - Refer to example on page B20: 56 for calculating length to diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING

SPECIALS

www.alliedmachine.com | 1.330.343.4283

B20: 19