B20-CRT_US-EN

BORING | Criterion® CB-Style CB204E VersaƟle Boring System

CB204E VersaƟle Boring Head Bore Diameter Range: 0.500" - 13.437"

A

DRILLING

Thread

D 2

D 3

B

L 1

BORING

Boring Head

L 1

D 2

D 3

Boring Range 0.500 - 13.437

Thread ConnecƟon

Weight

Part No.

11/2 - 18 CB204E IMPORTANT : Wax covered gib screws are factory set and should not be removed. Adjustment of these screws will cause performance issues. NOTICE: Cross hole bars should always be secured in the bar holder with at least two set screws. Imperial (in) = 0.001" adjustment on diameter. NOTE : Max spindle speed: 800 RPM at 0 radial offset. 3.715 4.000 1.000 9.300 (lbs)

C

REAMING

D

BURNISHING

E

THREADING

B20: 58 - 59

B20: 46 - 50

B20: 44 - 45

B20: 54 - 55

Key on B20: 1

= Imperial (in) = Metric ( mm )

X

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: - Refer to page B20: 57 to see formula for calculaƟng weight of tool assembly. - Consult machine tool builder for machine's weight limitaƟons. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING IMPORTANT: Max spindle speed refers to maximum possible speed for individual boring head and is not a recommended parameter. Refer to page B20: 58 for recommended applicaƟon specific parameters. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com

SPECIALS

B20: 36

www.alliedmachine.com | 1.330.343.4283