Roller Burnishing Product Catalog

Recommended Drilling Data | Metric (mm) BURNISHING | S.C.A.M.I.® Roller Burnishing Systems

ROLLER BURNISHERS

Recommended Feed (mm/rev) by Diameter

4.70 mm - 12.00 mm

12.01 mm - 25.00 mm

25.01 mm - 50.00 mm

50.01 mm - 165.90 mm

Hardness (BHN) 100 - 180 180 - 250 85 - 180 180 - 275 125 - 180 180 - 325 125 - 180 180 - 375 240 - 450 125 - 180 180 - 350 150 - 200 200 - 250

Speed (m/min)

ISO Material

D00

Free-Machining Steel 1118, 1215, 12L14, etc.

22 - 90 22 - 90 22 - 90 22 - 90 22 - 90 22 - 90 22 - 90 22 - 90 22 - 90 22 - 90 22 - 90 22 - 90 22 - 90

0.13 - 0.51 0.36 - 0.94 0.81 - 2.18 1.78 - 3.07 0.13 - 0.51 0.36 - 0.94 0.81 - 2.18 1.78 - 3.07 0.13 - 0.51 0.36 - 0.94 0.81 - 2.18 1.78 - 3.07 0.13 - 0.51 0.36 - 0.94 0.81 - 2.18 1.78 - 3.07 0.13 - 0.51 0.36 - 0.94 0.81 - 2.18 1.78 - 3.07 0.13 - 0.51 0.36 - 0.94 0.81 - 2.18 1.78 - 3.07 0.13 - 0.51 0.36 - 0.94 0.81 - 2.18 1.78 - 3.07 0.13 - 0.51 0.36 - 0.94 0.81 - 2.18 1.78 - 3.07 0.13 - 0.51 0.36 - 0.94 0.81 - 2.18 1.78 - 3.07 0.13 - 0.51 0.36 - 0.94 0.81 - 2.18 1.78 - 3.07 0.13 - 0.51 0.36 - 0.94 0.81 - 2.18 1.78 - 3.07 0.13 - 0.51 0.36 - 0.94 0.81 - 2.18 1.78 - 3.07 0.13 - 0.51 0.36 - 0.94 0.81 - 2.18 1.78 - 3.07

Low-Carbon Steel 1010, 1020, 1025, 1522, 1144, etc. Medium-Carbon Steel 1030, 1040, 1050, 1527, 1140, etc.

Alloy Steel 4140, 5140, 8640, etc. High-Strength Alloy 4340, 4330V, 300M, etc. Structural Steel A36, A285, A516, etc. Tool Steel H-13, H-21, A-4, S-3, etc. Stainless Steel 400 Series 416, 420, etc. Stainless Steel 300 Series 304, 316, 17-4PH, etc.

P

135 - 350

22 - 60

0.13 - 0.51 0.36 - 0.94 0.81 - 2.18 1.78 - 3.07

M

135 - 275

22 - 60

0.13 - 0.51 0.36 - 0.94 0.81 - 2.18 1.78 - 3.07

Grey and Ductile Cast Iron, Spheroidal Cast Iron (Pearlitic)

< 200 > 200

22 - 90 22 - 90 22 - 90

0.13 - 0.51 0.36 - 0.94 0.81 - 2.18 1.78 - 3.07 0.13 - 0.51 0.36 - 0.94 0.81 - 2.18 1.78 - 3.07 0.13 - 0.51 0.36 - 0.94 0.81 - 2.18 1.78 - 3.07

K

Spheroidal Cast Iron (Ferritic)

260 - 320

Copper and Alloys, and Brass

< 500

45 - 105 0.13 - 0.51 0.36 - 0.94 0.81 - 2.18 1.78 - 3.07

Bronze, and Bronze Phosphorous

< 180

45 - 105 0.13 - 0.51 0.36 - 0.94 0.81 - 2.18 1.78 - 3.07

N

Aluminum and Alloys

< 150

45 - 105 0.13 - 0.51 0.36 - 0.94 0.81 - 2.18 1.78 - 3.07

High-Temp Alloy Hastelloy® B, Inconel® 600, etc.

140 - 310

15 - 45

0.13 - 0.51 0.36 - 0.94 0.81 - 2.18 1.78 - 3.07

S

Titanium Alloy

140 - 310

15 - 45

0.13 - 0.51 0.36 - 0.94 0.81 - 2.18 1.78 - 3.07

NOTE: For diameters less than 4.70 mm (0.1850"), please contact application engineering for recommended speed and feeds.

Max RPM

Series

Max RPM

H

2000 1500 1200 1000 1000

I

K L F

M

900 900 700 600 500 300 300 250 200

N O Q R P

S T

U

IMPORTANT: The speeds and feeds listed above are a general starting point for all applications. Factory technical assistance is available through our Application Engineering department.

D00: 41

www.alliedmachine.com | 1.330.343.4283