A20-XTP_EU-EN

DRILLING | GEN3SYS® XT Pro and XT High Penetration Replaceable Insert Drilling System

GEN3SYS XT Pro Drilling System Information

A

Advanced Design Capabilities The advanced XT Pro insert combines a coating and geometry specifically designed to achieve optimal results in ISO material drilling applications. With quick connectivity to existing GEN3SYS drill insert holders, the XT Pro insert can be interchanged with previous XT inserts with ease, resulting in minimal setup times so you can immediately increase your productivity.

GEN3SYS XT Pro Drill Inserts

DRILLING

XT Pro Inserts Connect with:

XT Pro holders

GEN3SYS holders

B

P - Steels • Designed to provide increased penetration rates and tool life in steel applications • Superior geometry and edge provides excellent chip control • Allied’s multilayer AM420 coating increases heat resistance and improves tool life K - Cast Irons • Uniquely designed for cast/nodular iron applications • Geometry includes a corner radius for improved hole finish and heat dispersion • Allied’s multilayer AM440 coating provides increased abrasion resistance and tool life

N - Nonferrous Materials • Designed for applications in aluminium, brass, and copper • The geometry yields excellent chip control in these softer materials • TiN coating gives the versatility to run in a variety of materials while reducing buildup Duplex Stainless steels, and other hard-to machine materials in the ISO M group. • Geometry optimized for improved chip formation while drilling at high penetration rates. • Substrate chosen to provide balance of toughness and wear resistance in difficult applications. • Allied’s AM460 coating provides industry-leading tool life in stainless steels. *Available in 12 - 32 series only. M - Stainless Steels* • Designed for all 300 series, 400 series, Super

BORING

P

N

C

REAMING

K

M

D

BURNISHING

Additional coolant to the cutting zone

Increased flute area

E

THREADING

XT Pro Drill Holders

X

3xD, 5xD, 7xD, 10xD, 12xD

SPECIALS

Enhanced coolant inlets improve the coolant flow

Provides increased insert life

Available in 3xD, 5xD, 7xD, 10xD, and 12xD

Straight flutes

A20: 6

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com