A20-XTP_EU-EN

GEN3SYS® XT Pro and XT Drilling System Contents

Reference Icons The following icons will appear throughout the catalogue to help you navigate between products.

Introduction Information Why You Should go with the Pro . . . . . . . . . . . . . . . 2 - 3 Test Results and Case Study . . . . . . . . . . . . . . . 4 - 5

Setup / Assembly Information Detailed instructions and information regarding the corresponding part(s)

GEN3SYS XT Pro Drilling System Information . . . . . . . . . . . . . . . . . 6 GEN3SYS XT Drilling System Information . . . . . . . . . . . . . . . . . 7 Insert Comparison and Assembly Information . . . . . . . . . . . . . . . . . 8 Holder Comparison and Overview . . . . . . . . . . . . . . . . . 9 Product Nomenclature . . . . . . . . . . . . . . 10 - 11

Recommended Cutting Data Speed and feed recommendations for optimum and safe boring

Through Coolant Option Indicates that the product is through coolant

Drill Series 11 Series . . . . . . . . . . . . . . 12 - 15 12 Series . . . . . . . . . . . . . . 16 - 19 13 Series . . . . . . . . . . . . . . 20 - 23 14 Series . . . . . . . . . . . . . . 24 - 27 15 Series . . . . . . . . . . . . . . 28 - 31 16 Series . . . . . . . . . . . . . . 32 - 35 17 Series . . . . . . . . . . . . . . 36 - 39 18 Series . . . . . . . . . . . . . . 40 - 43 20 Series . . . . . . . . . . . . . . 44 - 47 22 Series . . . . . . . . . . . . . . 48 - 51 24 Series . . . . . . . . . . . . . . 52 - 55 26 Series . . . . . . . . . . . . . . 56 - 59 29 Series . . . . . . . . . . . . . . 60 - 63 32 Series . . . . . . . . . . . . . . 64 - 67

Diameter Range

Series

Metric (mm) 11.00 - 11.99 12.00 - 12.99 13.00 - 13.99 14.00 - 14.99 15.00 - 15.99 16.00 - 16.99 17.00 - 17.99 18.00 - 19.99 20.00 - 21.99 22.00 - 23.99 24.00 - 25.99 26.00 - 28.99 29.00 - 31.99 32.00 - 35.00

Imperial (inch) 0.4331 - 0.4723 0.4724 - 0.5117 0.5118 - 0.5511 0.5512 - 0.5905 0.5906 - 0.6298 0.6299 - 0.6692 0.6693 - 0.7086 0.7087 - 0.7873 0.7874 - 0.8660 0.8661 - 0.9448 0.9449 - 1.0235 1.0236 - 1.1416 1.1417 - 1.2597 1.2598 - 1.3780

11 12 13 14 15 16 17 18 20 22 24 26 29 32

Recommended Cutting Data Metric (mm)

GEN3SYS XT Pro . . . . . . . . . . . . . . 68 - 71 GEN3SYS XT . . . . . . . . . . . . . . 72 - 75

GEN3SYS XT Pro . . . . . . . . . . . . . . 76 - 79 GEN3SYS XT . . . . . . . . . . . . . . 80 - 83

Imperial (inch)

Tap Drill Information and Formulas . . . . . . . . . . . . . . 84 - 85 Deep Hole Drilling Guidelines . . . . . . . . . . . . . . . . . 86 Troubleshooting Guide . . . . . . . . . . . . . . . . . 87

A20: 1

A20: 1