A20-XTP_EU-EN

DRILLING | GEN3SYS® XT Pro and XT High Penetration Replaceable Insert Drilling System Competitive Test Results

TEST RESULTS

A

DRILLING

Average Tool Life Test Results Drilling in 4150 Steel

Project Profile: Tooling Solution:

Competitive Testing in 4150 Steel GEN3SYS XT Pro: P (steel) geometry with XT Pro Holder

112.50

The Parameters: • Hole Diameter = 19 mm (0.748") • Depth of Cut = 38.1 mm (1-1/2") • Coolant = 20.68 BAR (300 PSI) • Speed = 1583 RPM • Feed = 563 mm/min (22.16 inch/min)

B

107.28

100.00

BORING

87.50

84.25

75.00

62.94

62.50

The Results: When run at the listed parameters, here is how the three different tooling solutions performed: Competitor 1 = 62.94 total linear meters Competitor 2 = 84.25 total linear meters GEN3SYS XT Pro = 107.28 total linear meters

50.00

C

37.50

Average Life (Linear meters)

REAMING

25.00

12.50

Competitor 1

Competitor 2

XT Pro (with XT Pro holder)

Drilling Tool

D

BURNISHING

E

THREADING

X

SPECIALS

A20: 4

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com