SOL-GENMACH_EU-EN

HOT ROLLED PLATES

T-A ® (-IN) GEOMETRY X Diameter range: 9.5 mm - 114.48 mm X Combination of high impact and Notch Point® geometries X Increases stability in deep hole applications X Enhances chip formation in materials with high elasticity/ ductility and poor chip forming characteristics REPLACEABLE INSERT DRILLS

T-A PRO ® STEEL (-P) GEOMETRY REPLACEABLE INSERT DRILLS X Diameter range: 11.1 mm - 47.80 mm X Designed to provide increased penetration rates and tool life in steel applications X Superior geometry and edge provides excellent chip control X Allied’s multilayer AM300® coating increases heat resistance and improves tool life

www.alliedmachine.com | 13