B10-WHL_EU-EN

BORING | Rough Machining

Twin CuƩers Height Displaced TangenƟal Inserts Diameter Range: 53.00 mm - 205.00 mm

A

X 1

X 2

1

B

A

D 2 D 1 D 5

2 D 1

D

0.7 mm Height Displacement 2

C

D

ConnecƟon Boring Range

Twin CuƩer

Part No.

Insert Form

D 2 | D 1 40 - 22 50 - 28 50 - 28 63 - 36 63 - 36 80 - 36 80 - 36 80 - 36

A

X 1

X 2

D 5

Weight

1. Insert Holder

2. Insert Holder (-0.7 mm) Serrated Body

151022 151032 151043 151034 151035 151009 151010 151010

268009 268010 268019 268020 268021 268022 268023 268023

148004 148005 148005 148006 148006 148007 1 48007 148009

53.00 - 66.00 75.00 55.00 65.00 - 83.00 75.00 55.00 65.00 - 83.00 75.00 55.00 82.00 - 103.00 90.00 60.00 82.00 - 103.00 90.00 60.00 100.00 - 130.00 90.00 60.00 125.00 - 155.00 90.00 60.00

- 0.70 (kg) - 1.00 (kg) - 1.00 (kg) - 2.20 (kg) - 2.20 (kg) - 3.00 (kg) - 3.10 (kg)

04 04 05 04 05 05 05 05

E

F

150.00 - 205.00 90.00 60.00 125.00 4.00 (kg)

NOTE : Insert holders sold in quanƟƟes of 1, and inserts sold separately.

G

H

I

J

K

L

B10-M: 12-13

B10-D: 23

B10-F

B10-H

B10: VI-VII

M

Key on B10-D: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

Inserts sold separately = Metric (mm)

IMPORTANT: Max spindle speed refers to maximum possible speed for an individual boring head and is not a recommended parameter. Refer to page B10-M: 12 for recommended applicaƟon-specific parameters. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com

INDEX

B10-D: 14

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com