B10-WHL_EU-EN

BORING | Master Shanks with MVS ConnecƟon

Accessories MounƟng Fixtures

A

B

C

D

MounƟng Fixture

Code

Type

Part No. 098060 098073 098061 098062 098063 098064 098065 098066 098067 098068 098069 098070 098071

Basic Body*

-

Adapter Adapter Adapter Adapter Adapter Adapter Adapter Adapter Adapter Adapter Adapter Adapter

30 Taper 40 Taper 50 Taper HSK-A 32 HSK-A 40 HSK-A 50 HSK-A 63 HSK-A 80 HSK-A 100

E

F

PSC 50 PSC 63 PSC 80

G

*Basic body and adapters sold separately.

H

I

J

K

B10-M: 12-13

B10: VI-VII

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING

M

-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com

INDEX

B10-F: 16

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com