B10-WHL_EU-EN
BORING | Large Diameter Boring
Alu-Line Basic D 60 Serrated Slides Diameter Range: 200.00 mm - 505.00 mm
A
A
30 mm
X 1
B
D 5
L 4
C
L 5
D
ConnecƟon
Boring Range
Serrated Slide
D 5
A
X 1
L 4
L 5
Weight 4.10 (kg) 5.20 (kg) 6.90 (kg) 8.00 (kg)
Part No. 349051 349052 349053 349054
D 60 D 60 D 60 D 60
200.00 - 280.00 275.00 - 355.00 350.00 - 430.00 425.00 - 505.00
85.00 85.00 85.00 85.00
191.00 264.00 339.00 414.00
110.00 110.00 125.00 125.00
E
F
G
H
I
J
K
B10-M: 12-13
B10-G: 23
B10-G: 16-19
B10-H
B10: VI-VII
Key on B10-G: 1
19.5-22 22-11
40-22 50-28 63-36 80-36 100-56
25-14 32-18
= Metric (mm)
L
Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING
M
-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.
-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com
INDEX
www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com
B10-G: 5
Made with FlippingBook Learn more on our blog