B10-WHL_EU-EN

BORING | Large Diameter Boring

Serrated Adapter with MVS ConnecƟon

A

D 2 D 1

MounƟng Adapter

MVS ConnecƟon

MounƟng Adapters

B

X 1

D 2 | D 1 50 - 28

X 1

X 2

L 1

L 2

Weight

Part No. 349046

X 2

50.00 27.00 101.00 76.00 1.30 (kg)

C

L 2

L 1

D

Inside Boring

ID Bore Range

Slide

Boring Heads

mm

E

349051 349052 349053 349054

310005/464006/564045 310005/ 464006 /564045 310005/ 464006 /564045 310005/ 464006 /564045 310005/ 464006 /564045

215.00 - 313.00 290.00 - 388.00 365.00 - 463.00 440.00 - 538.00 480.00 - 778.00

349005 with 349015

F

G

Outside Boring

OD Bore Range

H

Slide

Boring Heads

mm

349051 349052 349053 349054

310005/ 464006 /565045 310005/ 464006 /565045 310005/ 464006 /565045 310005/ 464006 /565045 310005/ 464006 /565045

67.00 - 165.00 142.00 - 240.00 217.00 - 315.00 292.00 - 390.00 332.00 - 630.00

I

349005 with 349015

NOTE: LH only spindle rotaƟon.

J

K

B10-M: 12-13

B10: VI-VII

Key on B10-G: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING

M

-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com

INDEX

B10-G: 8

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

Made with FlippingBook Learn more on our blog