B10-WHL_EU-EN

BORING | Large Diameter Boring

Serrated Slide Eco D 60 Accessories Clamping Pieces

A

5

6

B

1

4

2

C

Clamping pieces for 537 casseƩes and counterweight sold separately. (See page B10-G: 20).

3

D

Base Slide Clamping Pieces

Base Slide

1 Cap Screw

2 Disc

3 Clamping Nut

4 Cap Screw

E

ConnecƟon

Part No. 349005 349006

Part No. 115771 115771

Service Key

Part No. 115737 115737

Part No. 415181 415181

Part No. 077128 077128

Service Key

D 60 D 60

s10 / C s10 / C

s14 / C s14 / C

F

G

Serrated Slide Clamping Pieces Serrated Slide

5 Cap Screw

6 Clamping Nut

Part No. 349014 349015

Part No. 115118 115118

Service Key

Part No. 115669 115669

H

s8 / B s8 / B

I

J

K

B10-M: 12-13

B10: VI-VII

Key on B10-G: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING

M

-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com

INDEX

B10-G: 24

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com