B10-WHL_EU-EN
BORING | Inserts
Wohlhaupter Insert Geometries PCD | CBN
A
B
PCD
Geometry
DescripƟon
ApplicaƟon Available Form
• Smooth geometry in posiƟve version with 7° rake angle for PCD • Sharp cuƫng edge
720
F20, F101, F103
C
F20, F39, F75, F101, F103, F123, F211, F262, F264 F20, F39, F101, F103, F211, F262, F264
• Smooth geometry with 0° rake angle for PCD • Sharp cuƫng edge
730
• Smooth geometry • Laser-cut chip breaker for PCD • Suitable for long-chipping aluminium wrought alloys
735
D
E
CBN
F
G
Geometry
DescripƟon
R
Fb
Fw
ApplicaƟon Available Form
• Smooth geometry with 0° rake angle for CBN • Rounded cuƫng edge with 30° chamfer
741
0.015 0.15
30°
F20, F101, F103
• Smooth geometry with 0° rake angle for CBN • Rounded cuƫng edge with 15° chamfer
H
742
0.015 0.1
15°
F20, F101, F103
• Smooth geometry with 0° rake angle for CBN • Rounded cuƫng edge with 30° chamfer
745
0.015 0.05
30°
F20, F211
I
F39, F104, F262, F264
• Smooth geometry with 0° rake angle for CBN • Rounded cuƫng edge with a small 20° chamfer • Smooth geometry with 0° rake angle for CBN • Rounded cuƫng edge • No chamfer • Smooth geometry with 0° rake angle for CBN • Rounded cuƫng edge with a large 20° chamfer
747
0.015 0.1
20°
F20, F101, F103, F211
748
0.015
-
-
J
749
0.015 0.2
20°
F75, F123, F264
• Smooth geometry with 7° rake angle for CBN • Rounded cuƫng edge
768
0.015
-
-
F20, F101, F103
K
L
M
INDEX
www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com
B10-H: 13
Made with FlippingBook Learn more on our blog