A91-SSD_US-EN
DRILLING | Structural Steel Replaceable Insert Drilling System
24
GEN3SYS® XT Pro Structural Steel Drilling System 24 Series | Diameter Range: 0.9449" - 1.0235" (24.00 mm - 25.99 mm)
A
DRILLING
D 1
140°
B
Inserts
Insert
BORING
Fractional Equivalent
D 1 inch 0.9449 0.9685 1.0000 1.0150
D 1 mm
XTST Part No. XTST24-24.00 XTST24-24.60 XTST24-25.40 XTST24-25.78
- - 1 -
24.00 24.60 25.40 25.78
C
L 1
L 7
L 4
REAMING
D 2
L 2
P 1
L 3
Holders
D
Body
Shank
Length
Flat YES YES YES YES YES YES YES YES
Part No.
L 2
L 4
L 3
L 1
L 7
D 2
P 1
BURNISHING
ST01240-100F ST03240-100F ST05240-100F ST07240-100F ST01240-25FM ST03240-25FM ST05240-25FM ST07240-25FM
1.5xD
1-35/64 3-5/64
2-61/64 4-31/64 6-17/32 8-37/64
3-3/32
5-15/64 6-49/64 8-13/16
2-9/32 2-9/32 2-9/32 2-9/32
1 1 1 1
1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT 1/8 BSPT 1/8 BSPT 1/8 BSPT 1/8 BSPT
3xD 5xD 7xD
4-5/8
5-1/8
6-21/32
7-11/64
8-45/64 10-55/64
1.5xD
39.0 78.0
74.8
78.3
130.8 169.8 221.8 273.8
56 56 56 56
25 25 25 25
3xD 5xD 7xD
113.8 165.8 217.8
117.3 169.2 221.2
129.9 181.9
E
THREADING
Connection Accessories
Admissible Tightening Torque* 27.0 in-lbs (305 N-cm)
Insert Screws
Nylon Locking Screws
Insert Driver
Replacement Tips
Preset Torque Hand Driver
739-IP9-1
739N-IP9-1
8IP-9
8IP-9TL
8IP-9B
*Tightening torques are calculated with a friction coefficient of µ = 0.14 and develop 90% of ultimate yield strength
X
A91: 38 - 39
A91: 5
Key on A91: 1
Inserts sold in multiples of 1 | Screws sold in multiples of 10 = Imperial (in) = Metric ( mm)
SPECIALS
NOTICE: Structural Steel GEN3SYS holders are specifically designed to be used only with XTST geometry inserts. Using other GEN3SYS XT or XT Pro insert geometries in these holders could lead to chip packing and tool failure. Contact Application Engineering for questions regarding proper use of tools. ext: 7611 | email: appeng@alliedmachine.com
www.alliedmachine.com | 1.330.343.4283
A91: 15
Made with FlippingBook - professional solution for displaying marketing and sales documents online