A91-SSD_US-EN

DRILLING | Structural Steel SoluƟons | 4TEX® Indexable Drill

EDGES 4 Insert Information

A

CUTTING

DRILLING

Periphery Edge

Center Edge

Center Edge

• Each insert has two inner cuƫng edges and two outer cuƫng edges. • Economical soluƟon that increases tool life because of the ability to rotate the inserts. • Available in ISO material-specific geometry/coaƟng combinaƟons.

B

Periphery Edge

BORING

Periphery Insert

Center Insert

180°

C

REAMING

Periphery edge chip formaƟon:

Center edge chip formaƟon:

D

BURNISHING

ISO Material

Geometry

Coating

Description

A general purpose geometry that provides excellent chip formaƟon in most steels including free-machining, medium- and high-carbon steels. A P30 carbide substrate for improved toughness and AM480 coaƟng, a proprietary wear resistant mulƟlayer PVD coaƟng to improve tool life. A higher rake geometry that provides excellent chip formaƟon in both stainless steels and high-temperature alloys. A tough M25 carbide substrate coated with AM485, a high heat resistance proprietary mulƟlayer PVD coaƟng. A lower rake geometry to improve edge strength in both hardened tool steels and high strength alloys. With a P30 carbide substrate for improved toughness and coated with AM480, a proprietary mulƟlayer PVD coaƟng to improve resistance against tool wear. With a general purpose geometry, the K inserts can be used in grey cast irons as well as ducƟle irons. A high wear-resistant K10 carbide substrate to improve tool life and coated with AM480, a proprietary mulƟlayer PVD coaƟng to improve resistance against tool wear. A higher rake cuƫng geometry provides excellent chip formaƟon in nonferrous materials. An M15/K15 carbide substrate paired with TiCN coaƟng for improved lubricity to resist built-up material, increasing tool life and maintaining chip formaƟon.

P

E

General Rake

AM480

THREADING

S M

High Rake

AM485

H

Low Rake

AM480

X

K

General Rake

AM480

SPECIALS

N

High Rake

TiCN

A91: 40

www.alliedmachine.com | 1.330.343.4283