A91-SSD_ESM
18
DRILLING | Structural Steel Solutions | GEN3SYS® XT Pro Replaceable Insert Drills
GEN3SYS® XT Pro Structural Steel Drilling System 18 Series | Diameter Range: 0.7087" - 0.7873" (18.00 mm - 19.99 mm)
A
DRILLING
D 1
140°
B
Inserts
Insert
BORING
D 1 inch 0.7087 0.7480
D 1 mm
Fractional Equivalent
XTST Part No. XTST18-18.00 XTST18-19.00
- -
18.00 19.00
L 1
C
L 7
L 4
REAMING
D 2
L 2
P 1
L 3
Holders
Body
Shank
D
L 2
L 4
L 3
L 1
L 7
D 2
P 1
Length
Flat YES YES YES YES YES YES YES YES
Part No.
ST01180-100F ST03180-100F ST05180-100F ST07180-100F ST01180-20FM ST03180-20FM ST05180-20FM ST07180-20FM
1.5xD
1.188 2.375 3.938 5.516
2.531 3.703 5.281 6.844
2.641 3.828 5.391 6.969
4.797 5.984 7.563 9.125 114.0 144.0 184.0 224.0
2.281 2.281 2.281 2.281
1 1 1 1
1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT 1/8 BSPT 1/8 BSPT 1/8 BSPT 1/8 BSPT
BURNISHING
3xD 5xD 7xD
1.5xD
30.0 60.0 99.9
64.0 94.0
67.1 97.1
50.0 50.0 50.0 50.0
20 20 20 20
3xD 5xD 7xD
134.0 174.0
137.1 177.1
139.9
E
THREADING
Connection Accessories
Admissible Tightening Torque* 27.0 in-lbs (305 N-cm)
Insert Screws
Nylon Locking Screws
Insert Driver
Replacement Tips
Preset Torque Hand Driver
7375-IP9-1
7375N-IP9-1
8IP-9
8IP-9TL
8IP-9B
*Tightening torques are calculated with a friction coefficient of µ = 0.14 and develop 90% of ultimate yield strength.
X
A91: 64 - 65
A91: 23
Key on A91: 1
Inserts sold in multiples of 1. | Screws sold in multiples of 10. = Imperial (in) = Metric (mm)
SPECIALS
NOTICE: Structural steel GEN3SYS holders are specifically designed to be used only with GEN3SYS XT Pro structural steel geometry inserts. Using other GEN3SYS XT or XT Pro insert geometries in these holders could lead to chip packing and tool failure. Contact Application Engineering for questions regarding proper use of tools. ext: 7611 | email: appeng@alliedmachine.com
A91: 30
www.alliedmachine.com | 1.330.343.4283
Made with FlippingBook - Online catalogs