A30-TAS_EU-EN
7/8
DRILLING | T-A® Replaceable Insert Drilling System
T-A Drill Inserts 8 Series | HSS | Diameter Range: 101.63 mm - 114.48 mm (4.001" - 4.507")
T 1
A
(for use with 7 series holders)
D 1
DRILLING
144°
HSS Inserts - Super Cobalt | HSS
B
Insert
Super Cobalt Part No.*
HSS Part No.
BORING
Fractional Equivalent
D 1 mm 102.00 103.19 104.00 104.75 106.00 106.36 107.95 108.00 109.54 110.00 111.13 112.00 112.71 114.00 114.30
D 1 inch 4.0157 4.0625 4.0945 4.1250 4.1732 4.1875 4.2500 4.2520 4.3125 4.3307 4.3750 4.4094 4.4375 4.4882 4.5000
TiN
TiN
T 1
158T-102 158T-0402 158T-104 158T-0404 158T-106 158T-0406 158T-0408 158T-108 158T-0410 158T-110 158T-0412 158T-112 158T-0414 158T-114 158T-0416
138T-102 138T-0402 138T-104 138T-0404 138T-106 138T-0406 138T-0408 138T-108 138T-0410 138T-110 138T-0412 138T-112 138T-0414 138T-114 138T-0416
4-1/64 4-1/16 4-3/32
11.11 11.11 11.11 11.11 11.11 11.11 11.11 11.11 11.11 11.11 11.11 11.11 11.11 11.11 11.11
4-1/8
-
4-3/16
4-1/4
C
-
4-5/16
-
REAMING
4-3/8
-
4-7/16
-
4-1/2
*Available as non-stocked standard
D
Double Wide (Oversized)** - Super Cobalt
Insert
Super Cobalt Part No.*
BURNISHING
D 1 mm 110.00 120.00 125.00 130.00 140.00 150.00 160.00
D 1 inch 4.3307 4.7244 4.9213 5.1181 5.5118 5.9055 6.2992
T 1
AM200®
158H-110DW 158H-120DW 158H-125DW 158H-130DW 158H-140DW 158H-150DW 158H-160DW
11.11 11.11 11.11 11.11 11.11 11.11 11.11
E
**Available as non-stocked standard. Additional Diameters up to 200 mm available on request. 120 mm maximum diameter for Stainless Steel
2 Piece Minium Order Quantity
THREADING
X
Inserts sold in quantities of 1
A30: 112 - 143 A30: 106 - 108
A30: 4 - 6
SPECIALS
Coatings not listed above can be supplied as non-stocked standards. Process fees may apply.
Key on A30: 1
TiN = 158T-XXXX
TiAlN = 158A-XXXX
HI, HR, CR, SK, BR, NC, WC, TC
TiCN = 158N-XXXX
AM200 ® = 158H-XXXX
www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com
A30: 105
Made with FlippingBook - Online Brochure Maker