A30-TAS_EU-EN
DRILLING | T-A® Replaceable Insert Drilling System
T-A Recommended Drilling Data | Imperial (inch) HSS Inserts | Flat Bottom Geometry
A
SFM
DRILLING
Hardness (BHN) 100 - 150 150 - 200 200 - 250 85 - 125 125 - 175 175 - 225 225 - 275 125 - 175 175 - 225 225 - 275 275 - 325 125 - 175 175 - 225 225 - 275 275 - 325 325 - 375 225 - 300 300 - 350 350 - 400 100 - 150 150 - 250 250 - 350 150 - 200 200 - 250 140 - 220 220 - 310 140 - 220 220 - 310 185 - 275 275 - 350 185 - 275 275 - 350 135 - 185 185 - 275 135 - 185 185 - 275 300 - 400 400 - 500 120 - 150 150 - 200 200 - 220 220 - 260 260 - 320 400 500 600
HSS Grade
ISO Material
TiN 170 155 140 150 140 130 120 140 130 120 110 130 120 110 105
TiAlN
TiCN
AM200®
Free-Machining Steel 1118, 1215, 12L14, etc.
HSS HSS HSS HSS HSS HSS HSS HSS HSS HSS HSS HSS HSS SC
250 230 210 220 210 195 185 210 195 185 175 185 175 155 145 135
230 205 185 195 185 175 155 185 175 155 150 175 155 145 135 125
290 265 245 255 245 225 215 245 225 215 205 215 205 180 170 155 110 195 170 140 110 90 75
Low-Carbon Steel
1010, 1020, 1025, 1522, 1144, etc.
Medium-Carbon Steel
B
1030, 1040, 1050, 1527, 1140, 1151, etc.
BORING
Alloy Steel
P
4140, 5140, 8640, etc.
SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC SC -
95 70 50 45 85 70 50 25 20 35 26 65 50 65 50 65 50 65 50
High-Strength Alloy
95 75 65
85 70 60
4340, 4330V, 300M, etc.
Structural Steel
HSS HSS
120 105
170 145 120
155 135 110
A36, A285, A516, etc.
C
Tool Steel
95 80 35 30 45 40 90 80 90 80 90 80 90 80
90 75 30 25 40 35 85 70 85 70 85 70 85 70
H-13, H-21, A-4, 0-2, S-3, etc.
95
REAMING
High-Temp Alloy
40 35 50 45
Hastelloy B, Inconel 600, etc.
Titanium Alloy
S
Aerospace Alloy
110
S82
90
Stainless Steel 400 Series
110
416, 420, etc.
90
D
Stainless Steel 300 Series 304, 316, 17-4PH, etc. Super Duplex Stainless Steel
110
M
90
110
BURNISHING
90
Wear Plate
- - -
- - -
- - -
- - -
Hardox®, AR400, T-1, etc.
H
Hardened Steel
45 25
65 40
60 35
80 45
Nodular, Grey, Ductile Cast Iron
HSS HSS HSS
150 130 110
220 195 175 150 120 750 400 750 400 190 150 220 150
195 175 150 125 105 650 350 650 350 175 125 190 130
255 225 205 175 140
K
SC SC
95 80
E
Cast Aluminium
30
HSS HSS HSS HSS
520 260 520 260 130 150 115 95
- -
THREADING
180
Wrought Aluminium
30
850 450 230 165 250 170
180
N
Aluminium Bronze
100 - 200 200 - 250
SC SC
Brass
100
HSS
Copper
60
SC
Contact our Application Engineering department for assistance when machining these materials
X
SPECIALS
IMPORTANT: The speeds and feeds listed above are a general starting point for all applications. Refer to the Coolant Recommendation charts for coolant requirements to run at the recommended speeds and feeds. Factory technical assistance is available through our Application Engineering department. See adjustment examples on the following page.
A30: 136
www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com
Made with FlippingBook - Online Brochure Maker