A30-TAS_EU-EN
2
DRILLING | T-A® Replaceable Insert Drilling System
T-A Drill Accessories 2 Series | Chamfer Rings | Rotary Coolant Adapters | Torx® Plus Screws
A
L 1
DRILLING
D 4
45°
B
BORING
T-ACR 45 Chamfer Ring
Chamfer Ring
Holder Series
Insert Driver Clamping Screw
Insert Driver
D 1 Range
D 4
L 1
Part No.
Insert Part No.
Insert Screw
T-ACR-45-2
2
0.9610 - 1.3800
1.598
1.000
T-ACRI-45-B-C5A 7255-IP8-1 8IP-8
7514-IP20-1 8IP-20
C
Rotary Coolant Adapter (RCA) and Accessories
L 1
P 1
REAMING
RCA O-Rings
Driving Rod Thread
ID OD L 1
P 1
Part No.
Kit Part No.*
Replacements
ID OD
2T-3SRM 2T-4SRM
25.4 54.0 28.6 M8 x 1.25 1/8 BSPT 31.8 63.5 34.9 M10 x 1.50 1/4 BSPT 1.000 2.125 1.125 5/16" - 18 1/8 NPT 1.250 2.500 1.375 3/8" - 16 1/4 NPT
2T1-3SR 2T1-4SR 2T1-3SR 2T1-4SR
2T1-3OR-10 2T1-4OR-10 2T1-3OR-10 2T1-4OR-10
2T-3SR 2T-4SR
Thread
*RCA Repair Kit includes (2) O-rings, (2) snap rings, and (2) thrust washers. Refer to page A30: 110 for proper RCA assembly and safety informaƟon.
D
BURNISHING
E
THREADING
ConnecƟon Accessories
Admissible Tightening Torque* 690 N-cm (61.0 in-lbs)
Insert Screws 7495-IP15-1
Nylon Locking Screws
Insert Driver
Replacement Tips
Preset Torque Hand Driver
7495N-IP15-1
8IP-15
8IP-15TL
8IP-15B
*Tightening torques are calculated with a fricƟon coefficient of µ = 0.14 and develop 90% of ulƟmate yield strength.
X
= Metric (mm) = Imperial (in)
A30: 58 - 67
A30: 68 - 72
Key on A30: 1
Inserts sold separately. Screws sold in packs of 10. O-rings sold in packs of 10.
SPECIALS
RCA rotaƟon during drilling can cause hose and/or hose fiƫng failure, machinery damage, and/or serious injury. To prevent, use RCA and posiƟve stop studs when drilling. Factory technical assistance is also available for your specific applicaƟons. WARNING
www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com
A30: 73
Made with FlippingBook - Online Brochure Maker