TG-OVR_US-EN

BURNISHING | S.C.A.M.I.® Roller Burnishing Systems

Product Selection Guide

XTP TAP TAS HPU APX 4TX REV OPN SSD ACP BTA WHL CRT ALV BRN THM

Diameter Range (inch / mm)

Length

0 - 1

1 - 2 - 25.4 - 50.8

2 - 3 - 50.8 - 76.2

3 - 4 - 76.2 - 101.6

4 - 5 - 101.6 - 127

5 - 6 - 127 - 152.4

6 - 7 - 152.4 - 177.8

0 - 25.4

Short

Standard

Long

Unlimited

Series

H* Mini

H*

I

K

L

F

M

N

O

P

Q

R

S

T

U

*For H series: Through hole tools start at 0.1555" (3.95 mm) and blind hole tools start at 0.2319" (5.89mm)

When to ORDER UP

In some cases, there will be a diameter overlap between a series and the series after it. If the diameter you need falls into this overlap, choose the higher of the two series. Example: You need a 24.64mm diameter tool. This diameter falls into both the K series and the L series.

• K series diameter range = 16.60 mm - 24.74 mm • L series diameter range = 24.54 mm - 31.16 mm

In this scenario, you would choose the L series tool that covers the 24.64 diameter.

www.alliedmachine.com | 1.330.343.4283

111