TG-OVR_US-EN

DRILLING | AccuPort 432® Port Contour Cutters

Replaceable Inserts Overview

XTP TAP TAS HPU APX 4TX REV OPN SSD ACP BTA WHL CRT ALV BRN THM AM200® Tube Dash No.

T-A® Drill Insert Grades

HSS Super Cobalt (T-A® / T-A® GEN2)

Carbide C5 (P40) (T-A® only)

Carbide C1 (K10) (T-A® GEN2 only)

Carbide C3 (K35) (T-A® only)

Suited for good to rigid machining applications, used for drilling exotic and high alloy materials, or general use when surface speed needs to be increased for use in material hardness up to 350 BHN 121kg.

Excellent for drilling free machining steel, low/medium carbon steels, alloy steels, high strength steels, tool steels, and hardened steels.

Excellent for drilling free machining steel, low/medium carbon steels, alloy steels, high strength steels, tool steels, and hardened steels.

Designed for drilling grey/white cast irons. The special geometry offers substantial increases in penetration rates and provides exceptional edge strength and tool life.

Port Form Inserts

T-A GEN2 Inserts

T-A Inserts

TiAlN

AM300®

AM200®

TiN

T-A GEN2 Standard Geometry • Designed for rigid machining applications, primarily used for drilling exotic and high alloy materials • Ideal for general use when the surface speed needs to be increased T-A Standard Geometry • First choice for machining aluminum • Enhanced geometry improves chip formation and hole quality • TiN coating improves heat resistance and extends tool life

L 1

L 7

L 10

Made-to-Order Tool Specifications Scan and email a copy of the table below to Allied’s Application Engineering Department to receive pricing for a made-to-order AccuPort 432 Port Contour Cutter. Send emails to appeng@alliedmachine.com

D 2

D 1 D 5

L 13

Specification

Port Thread Size

D 1

L 13

D 5

L 10

L 1

D 2

L 7

J1926 ISO 6149 ISO 6149 (no ridge) JDS-G173.1 AS5202

Company Name

Contact Name

Phone

Distributor Name

Fax

72

www.alliedmachine.com | 1.330.343.4283