TG-OVR_US-EN

DRILLING | GEN3SYS® XT Pro and XT High Penetration Replaceable Insert Drilling System

Competitive Test Results

XTP TAP TAS HPU APX 4TX REV OPN SSD ACP BTA WHL CRT ALV BRN THM

TEST RESULTS

Average Tool Life Test Results Drilling in 4150 Steel

Project Profile: Tooling Solution:

Competitive Testing in 4150 Steel GEN3SYS XT Pro: (P) steel geometry with XT Pro Holder

4500

The Parameters: • Hole Diameter = 0.748" (19 mm) • Depth of Cut = 1-1/2" (38.1 mm)

4224

4000

• Coolant = 300 PSI • Speed = 1583 RPM • Feed = 22.16 inch/min (563 mm/min)

3500

3317

3000

2478

2500

The Results: When run at the listed parameters, here is how the three different tooling solutions performed: Competitor 1 = 2478 total linear inches Competitor 2 = 3317 total linear inches GEN3SYS XT Pro = 4224 total linear inches

2000

1500

Average Life (Linear Inches)

1000

500

Competitor 1

Competitor 2

XT Pro (with XT Pro holder)

Drilling Tool

6

www.alliedmachine.com | 1.330.343.4283