TG-OVR_US-EN

REAMING | ALVAN® Reaming Systems by S.C.A.M.I.®

XTP TAP TAS HPU APX 4TX REV OPN SSD ACP BTA WHL CRT ALV BRN THM Coatings, Cutting Materials, and Dimple Indicators Dimple Indicators Material Indicator Replaceable Head Style Carbide Two Dimples Cermet Two Dimples with Line Cutting Material Information Material Indicator Carbide K Cermet S Uncoated Ideal for non-ferrous applications TiCN (C) Provides improved surface finish

Coating Information

TiN (N) Ideal for general purpose applications

TiAlN (A) Provides higher heat resistance to improve tool life

Alcrona (K) Provides excellent wear resistance and can help increase cutting speeds

Details

A fine-grain carbide suitable for all conventional reaming applications. Recommended where rigidity is not excellent and speeds must be reduced.

Cermet provides high wear resistance and is recommended for abrasive and increased speed applications. Not recommended for poor rigidity or interrupted cuts.

Monobloc Style

Cutting Ring Style

NOTE: The dimple location also indicates which 2 cutting teeth are 180° opposed

96

www.alliedmachine.com | 1.330.343.4283