AMPC-E_US-EN

First page Table of contents 1 Next page Last page

Allied Machine offers top-quality thread mill solutions in both solid carbide and indexable thread mill options. The AccuThread™ 856 is available in both solid carbide and indexable and comes standard with the premium AM210® coating for increased tool life. The ThreadMills USA™ solid carbide thread mills are available with and without coolant through capabilities.

Drilling

Boring

Reaming

Burnishing

Thread Milling THREADING Solid Carbide and Insert Style Thread Mills

Specials

AccuThread ® 856 | AccuThread ® T3 |

S E C T I O N E Threading

Threading Solutions Solid Carbide and Indexable Thread Mills | AccuThread® 856 | ThreadMills USA™

Any Thread, Any Time Allied Machine's thread milling product line has developed into a comprehensive range of high-precision tooling that offers outstanding productivity with exceptional levels of tool life and thread accuracy. The thread mill range covers both solid carbide and indexable replaceable insert tools with an extensive range of thread forms. Our thread milling product line has been specifically designed to provide customers with a wide range of options. This is achieved by offering two thread mill ranges within our product lineup: the low cost, general production ThreadMills USA range and the high performance, high productivity AccuThread range.

Your safety and the safety of others is very important. This catalog contains important safety messages. Always read and follow all safety precautions. This triangle is a safety hazard symbol. It alerts you to potential safety hazards that can cause tool failure and serious injury. When you see this symbol in the catalog, look for a related safety message that may be near this triangle or referred to in the nearby text. There are safety signal words also used in the catalog. Safety messages follow these words. WARNING WARNING (shown above) means that failure to follow the precautions in this message could result in tool failure and serious injury. NOTICE means that failure to follow the precautions in this message could result in damage to the tool or machine but not result in personal injury. NOTE and IMPORTANT are also used. These are important that you read and follow but are not safety-related. Visit www.alliedmachine.com for the most up-to-date information and procedures.

Online programmer available 24/7

Solid carbide and indexable insert styles

Large range of thread form options

Applicable Industries

Aerospace Agriculture

Automotive

Firearms

General Machining

Medical

Oil & Gas

Renewable Energy

Tool, Mold & Die

Threading Solutions Contents

Reference Icons The following icons will appear throughout the catalog to help you navigate between products.

Introduction Information Thread Mills Overview and Online Tools . . . . . . . . . . . . . . . 2 - 3

Bolt-in Style Inserts Refers to the available bolt-in style thread mill insert options

Solid Carbide Thread Mills

Product Overview . . . . . . . . . . . . . . . . . 4 Port and Thread Finishing Kits . . . . . . . . . . . . . . . . . 5 Product Nomenclature . . . . . . . . . . . . . . . 6 - 7 BSW Thread Form . . . . . . . . . . . . . . . 8 - 9 BSPT Thread Form . . . . . . . . . . . . . . . . . 10 BSPP Thread Form . . . . . . . . . . . . . . . . . 11

Bolt-in Style Insert Holders Refers to the range of holder options available for bolt-in style inserts

Pin Style Inserts Refers to the available pin style thread mill insert options.

NPT Thread Form . . . . . . . . . . . . . . 12 - 13 NPTF Thread Form . . . . . . . . . . . . . . 14 - 15 NPS Thread Form . . . . . . . . . . . . . . . . . 16 NPSF Thread Form . . . . . . . . . . . . . . . . . 17 UN Thread Form . . . . . . . . . . . . . . 18 - 25 ISO Thread Form . . . . . . . . . . . . . . 26 - 29

Pin Style Insert Holders Refers to the range of holder options available for pin style inserts

Setup / Assembly Information Detailed instructions and information regarding the corresponding part(s)

UN Thread Form (AccuThread T3®) . . . . . . . . . . . . . . 30 - 3 2 ISO Thread Form (AccuThread T3®) . . . . . . . . . . . . . . 33 - 3 4

Recommended Cutting Data Speed and feed recommendations for optimum and safe threading

Indexable Thread Mills Product Overview . . . . . . . . . . . . . . . . . 3 6 Product Nomenclature . . . . . . . . . . . . . . . . . 3 7 Bolt-in Style: NPT / NPTF Thread Forms . . . . . . . . . . . . . . . . . 3 8 BSPT / BSPP Thread Forms . . . . . . . . . . . . . . . . . 39

Coolant-Through Option Indicates that the product is coolant through

UN Thread Form . . . . . . . . . . . . . . . . . 40 UNJ Thread Form . . . . . . . . . . . . . . . . . 41 ISO Thread Form . . . . . . . . . . . . . . . . . 42 Holders . . . . . . . . . . . . . . . . . 43 Pin Style: NPT / NPTF / BSPT Thread Forms . . . . . . . . . . . . . . . . . 4 4 BSPP / API-ROUND / ACME Thread Forms . . . . . . . . . . . . . . . . . 4 5

UN Thread Form . . . . . . . . . . . . . . 46 - 4 7 UNJ Thread Form . . . . . . . . . . . . . . . . . 4 8 ISO Thread Form . . . . . . . . . . . . . . . . . 49 Holders . . . . . . . . . . . . . . 50 - 51

Recommended Cutting Data Pre-Drill Information, Formulas and Recommended Pass Chart . . . . . . . . . . . . . . 52 - 53

Solid Carbide: AccuThread® 856 . . . . . . . . . . . . . . 54 - 5 5 Solid Carbide: ThreadMills USA™ . . . . . . . . . . . . . . 56 - 5 7 Solid Carbide: AccuThread® T3 . . . . . . . . . . . . . . 58 - 59 Indexable: AccuThread® 856 . . . . . . . . . . . . . . 60 - 63 Programming Guide . . . . . . . . . . . . . . 64 - 6 5 AccuThread® T3 Technical Guide . . . . . . . . . . . . . . . . . 6 6 Troubleshooting Guide . . . . . . . . . . . . . . 68 - 69

E: 1

THREADING | Solid Carbide and Indexable Thread Mills

High Performance Threading Solutions

THREAD MILLING DONE RIGHT

DRILLING

BORING

Solid Carbide Thread Mills

Notes

• Allied Machine's proprietary AM210® coating yields a 25-50% increase in tool life over competitor products • Standard cutting lengths allow for multiple applications without the need for special thread mills • Helical flute offers increased strength and rigidity when cutting forces are applied • Helical flute offers increased strength and rigidity when cutting forces are applied • High quality for consistent, predictable production • Coolant-through options available • TiAlN coating improves tool life versus uncoated tools • Allied Machine's proprietary AM210® coating yields a 25-50% increase in tool life over competitor products • Standard cutting lengths allow for multiple applications without the need for special thread mills • Helical flute offers increased strength and rigidity when cutting forces are applied

AccuThread® 856

REAMING

ThreadMills USA™

AccuThread® T3

BURNISHING

Indexable Insert Thread Mills

Notes

• Thread mill holders are manufactured from stainless steel that is engineered to dampen vibration during operation • Extensive range of thread forms with two thread lengths • Can produce left- or right-handed threads

AccuThread® 856 Bolt-in Style

THREADING

• Patented pin style locking system ensures unsurpassed repeatability • Thread mill holders are manufactured from stainless steel that is engineered to dampen vibration during operation • Extensive range of thread forms with two thread lengths • Full profiles present on all inserts allow 100% thread form against 65-75% for tapping • Allied Machine's premium carbide allows for extended tool life while providing high-quality thread forms • Allied Machine's proprietary AM210® coating yields a 25-50% increase in tool life over competitor products

AccuThread® 856 Pin Style

AccuThread® 856 Indexable Inserts

SPECIALS

Bolt-in Style

Pin Style

E: 2

www.alliedmachine.com | 1.330.343.4283

THREADING | Solid Carbide and Indexable Thread Mills

Online Tools

Find your thread mill. Create your program. Insta-Code ®

DRILLING

The all new software lets you choose the best thread mill product for your application and create the program code for your machine. Insta-Code is available as a PC download app (that can be used offline) and an online web app available 24/7 at www.alliedmachine.com/InstaCode. Eliminate the wait. Get your program now.

BORING

Insta-Code also has a Cycle Time Calculator

REAMING

Online Version

Download Version

Offline Version Updates

BURNISHING

• Generates thread mill G-code programs • Available online 24/7 • No login required • No updates needed

• Creates program code for multiple machine platforms • Suggests a thread mill based on application details • Provides estimated cycle time for improved production • Available for use offline

• Update your offline Insta-Code software • Download the updated .zip file, then transfer to the offline computer. Click "check for update" in your Insta Code software and navigate to the downloaded zip file • This allows you to keep all your saved programs

THREADING

• Easily share the program code • Supported on all web browsers

1 Download and open Allied_Machine_Insta-Code.zip

2 Click on setup.exe to install the program

3 One click updates are available for online computers Supported on all Windows OS

SPECIALS

www.alliedmachine.com/InstaCode

www.alliedmachine.com | 1.330.343.4283

E: 3

THREADING | Solid Carbide and Indexable Thread Mills

Solid Carbide Styles and Thread Forms

DRILLING

Straight BSW

Helical BSPP, NPS, NPSF, UN, ISO

Taper Helical BSPT, NPT, NPTF

Helical (3-Tooth Style) UN, ISO

AccuThread® 856

BORING

AccuThread® T3

ThreadMills USA™ (coolant and non-coolant)

REAMING

AccuThread ® T3

Left-Hand Cutting The tool continues to climb mill while it moves from top to bottom Advantage Improves tool life and produces a precise thread form

BURNISHING

AM210® Coating Multilayer PVD coating Advantage

3 Cutting Teeth The tool cuts minimal threads at once and reduces side deflection Advantage Cuts harder materials and produces deeper threads than a standard thread mill

Improves cycle times and tool life

THREADING

Additional Information • Available in UN and ISO thread forms • Available in imperial and metric shanks • Available in 2xD and 3xD lengths

Internal

1/4P

60°

SPECIALS

1/8P

External

1/8P

External

UN Thread Form

ISO Thread Form

E: 4

www.alliedmachine.com | 1.330.343.4283

THREADING | Solid Carbide and Indexable Thread Mills

Port and Thread Finishing Kits

WE HAVE A KIT FOR THAT Kits aren’t for everyone, but if you work on different projects from day to day, you need to be prepared for the work tomorrow will bring.

DRILLING

BORING

REAMING

The Complete Package Producing fully finished threaded hydraulic ports has never been easier. The Port and Thread Finishing Kit includes the AccuPort 432® port contour cutter with a dedicated AccuThread® 856 solid carbide thread mill in a single kit. You also receive the T-A® inserts and port form inserts needed to complete the assembly. Port kits incorporate the AccuThread 856 solid carbide thread mills to increase the manufacturing flexibility by allowing hydraulic ports to be produced in just two operations. In addition, where a unique port profile is required, Allied Machine provides a dedicated special tooling solution using our extensive tool design and manufacturing experience to meet precise specifications.

BURNISHING

NOTE: See Section A92 of our product catalog for the complete list of Port and Thread Finishing Kits.

One Tool, FOUR Operations

THREADING

Port Contour Spot Face Tap Drill

Spot Drill

SPECIALS

NOTE: See Section A92 of our product catalog for full AccuPort 432 product line information.

www.alliedmachine.com | 1.330.343.4283

E: 5

THREADING | Solid Carbide and Indexable Thread Mills

Product Nomenclature

AccuThread® 856 Solid Carbide Thread Mills

DRILLING

U K

0250 - 20

1. Thread Mill

2. Thread Class

3. Coating

4. Min Thread Diameter

5. Thread Pitch

6. Shank

TM = Standard

U = UN

K = AM210® U = Uncoated

0250 = 1/4 (English)

20 = UN 20 TPI 075 = ISO 0.75 NPT = All pipe threads will show thread form

Blank = Imperial

HDTM = Heavy duty TW = Weldon flat

N = NPT, NPTF

0008 = #8 (Number Drill)

M = Metric

B = BSPP, BSPT, BSW M = ISO A = AccuPort® specific

0450 = M4.5 (ISO)

BORING

ThreadMills USA™ Solid Carbide Thread Mills

TM 250 20

REAMING

1. Thread Mill

2. Min Thread Diameter 250 = 1/4 (English) 08 = #8 (Number Drill)

3. Thread Pitch

4. Optional

5. Shank

TM = TiAlN

20 = UN 20 TPI 075 = ISO 0.75 NPT = All pipe threads will show thread form

CH = Coolant hole DE = Double end

Blank = Imperial

TMFT = Uncoated HDTM = Heavy duty

M = Metric

NPT = All pipe threads will show thread form

45 = M4.5 (ISO)

HDTMFT = Heavy duty uncoated

BURNISHING

Reference Key Symbol

L 1

Attribute

L 6

D 1 D 2

Maximum cutter diameter

Shank diameter Overall length Length of cut

D 2

D 1

L 1 L 6

THREADING

SPECIALS

E: 6

www.alliedmachine.com | 1.330.343.4283

THREADING | Solid Carbide and Indexable Thread Mills

Product Nomenclature

AccuThread® T3 Solid Carbide Thread Mills

DRILLING

TM 073 64

M - 3T

1. Thread Mill

2. Min Thread Diameter

3. Pitch

4. Shank

5. Style

6. Depth to Diameter Ratio

TM = Standard

250 = 1/4 (English) 45 = M4.5 (Metric)

20 = UN 20 TPI 075 = ISO 0.75

Blank = Imperial

3T = 3 tooth

2X = 2xD 3X = 3xD

M = Metric

BORING

Reference Key Symbol

Attribute

L 1

L 6

D 1 D 2 D 3

Maximum cutter diameter

Shank diameter

D 2

D 1

Undercut diameter

L 1 L 6

Overall length Length of cut

D 3

REAMING

BURNISHING

THREADING

SPECIALS

www.alliedmachine.com | 1.330.343.4283

E: 7

BSW

THREADING | Solid Carbide and Indexable Thread Mills

Solid Carbide Thread Mills BSW | Noncoolant

Internal

DRILLING

R0.137P

55°

L 1

R0.137P

External

L 6

D 2

D 1

BSW | Noncoolant

BORING

Thread Mill

Part No.

TPI (Pitch)

Min Thread Ø

D 1

D 2

L 6

L 1

Flutes

ThreadMills USA™

AccuThread® 856

TM20BSW TM18BSW TM16BSW TM14BSW TM12BSW TM11BSW TM10BSW TM9BSW TM8BSW

- - - - - - - - -

20 18 16 14 12 11 10 20 18 16 14 12 11 10 9 8

1/4

3 3 5 5 5 5 5 6 6 3 3 5 5 5 5 5 6 6

0.177 0.197 0.276 0.311 0.354 0.468 0.468 0.620 0.620

0.250 0.250 0.312 0.312 0.375 0.500 0.500 0.625 0.625

0.400 0.445 0.563 0.715 0.750 0.910 1.100 1.112 1.375 10.16 11.29 14.29 18.15 19.10 23.10 27.94 28.23 34.94

2.500 2.500 3.000 3.000 3.500 3.500 3.500 4.000 4.000 58.00 58.00 64.00 64.00 73.00 84.00 84.00 93.00 93.00

5/16

3/8

7/16

1/2 5/8 3/4 7/8

REAMING

TM20BSWM TM18BSWM TM16BSWM TM14BSWM TM12BSWM TM11BSWM TM10BSWM TM9BSWM TM8BSWM

TMBK0250-20M TMBK0312-18M TMBK0375-16M TMBK0437-14M TMBK0500-12M TMBK0625-11M TMBK0750-10M TMBK0875-9M TMBK1000-8M

1/4

4.50 5.00 7.00 7.90 9.00

6.00 6.00 8.00 8.00

5/16

3/8

7/16

1/2 5/8 3/4 7/8

10.00 12.00 12.00 16.00 16.00

11.90 11.90 15.90 15.90

9 8

BURNISHING

THREADING

Weldon Flat

E: 52 - 55

E: 4

SPECIALS

To order a thread mill with a Weldon flat, replace the leading TM designator with TW (available for inch shanks 3/8 and above, or metric shanks 6 mm and above) Example: Cylindrical shank = TM NK0500-NPT | Weldon shank flat = TW NK0500-NPT NOTE: Weldon flats have a minimum order quantity of 2 pieces

Key on E: 1

= Imperial (in) = Metric (mm )

E: 8

www.alliedmachine.com | 1.330.343.4283

THREADING | Solid Carbide and Indexable Thread Mills

BSW

Solid Carbide Thread Mills BSW | Coolant Through

Internal

DRILLING

R0.137P

55°

L 1

R0.137P

External

L 6

D 2

D 1

BSW | Coolant Through

BORING

Thread Mill

Part No.

TPI (Pitch)

Min Thread Ø

D 1

D 2

L 6

L 1

Flutes

ThreadMills USA™ TM20BSWCH TM18BSWCH TM16BSWCH TM14BSWCH TM12BSWCH TM11BSWCH TM10BSWCH TM9BSWCH TM8BSWCH TM20BSWCHM TM18BSWCHM TM16BSWCHM TM14BSWCHM TM12BSWCHM TM11BSWCHM TM10BSWCHM TM9BSWCHM TM8BSWCHM

20 18 16 14 12 11 10 20 18 16 14 12 11 10 9 8

1/4

3 3 5 5 5 5 5 6 6 3 3 5 5 5 5 5 6 6

0.177 0.197 0.276 0.311 0.354 0.468 0.468 0.620 0.620

0.250 0.250 0.312 0.312 0.375 0.500 0.500 0.625 0.625

0.400 0.445 0.563 0.715 0.750 0.910 1.100 1.112 1.375 10.16 11.29 14.29 18.15 19.10 23.10 27.94 28.23 34.94

2.375 2.375 3.000 3.000 3.000 3.500 3.500 4.000 4.000 58.00 58.00 64.00 64.00 84.00 84.00 84.00 93.00 93.00

5/16

3/8

7/16

1/2 5/8 3/4 7/8

REAMING

1/4

4.50 5.00 7.00 7.90 9.00

6.00 6.00 8.00 8.00

5/16

3/8

7/16

1/2 5/8 3/4 7/8

10.00 12.00 12.00 16.00 16.00

11.90 11.90 15.90 15.90

9 8

BURNISHING

THREADING

Weldon Flat

E: 52 - 55

E: 4

SPECIALS

Key on E: 1

= Imperial (in) = Metric (mm )

www.alliedmachine.com | 1.330.343.4283

E: 9

BSPT

THREADING | Solid Carbide and Indexable Thread Mills

Solid Carbide Thread Mills BSPT

Internal

R0.137P

DRILLING

27.5° 27.5°

R0.137P

90°

L 1

1° 47’

External

L 6

D 2

D 1

BSPT | Noncoolant

BORING

Thread Mill

Part No.

TPI (Pitch)

Min Thread Ø

D 1

D 2

L 6

L 1

Flutes

ThreadMills USA™

AccuThread® 856

TM28BSPT TM19BSPT TM14BSPT TM11BSPT TM28BSPTM TM19BSPTM TM14BSPTM TM11BSPTM

- - - -

28 19 14 11 28 19 14 11

1/16 and 1/8 1/4 and 3/8 1/2 and 3/4

3 4 4 4 3 4 4 4

0.240 0.310 0.470 0.620

0.250 0.312 0.500 0.625

0.393 0.580 0.787 1.546

2.500 3.000 3.500 4.000 58.00 73.00 84.00 93.00

TMBK0063-BSPTM TMBK0250-BSPTM TMBK0500-BSPTM TMBK1000-BSPTM

1/16 and 1/8 1/4 and 3/8 1/2 and 3/4

5.97 9.91

6.00

9.98

10.00 12.00 16.00

14.73 20.00 32.31

11.94 15.75

REAMING

Internal

R0.137P

27.5° 27.5°

R0.137P

90°

L 1

1° 47’

External

L 6

BURNISHING

D 2

D 1

BSPT | Coolant Through

Thread Mill

Part No.

TPI (Pitch)

Min Thread Ø

D 1

D 2

L 6

L 1

Flutes

ThreadMills USA™ TM28BSPTCH TM19BSPTCH TM14BSPTCH TM11BSPTCH TM28BSPTCHM TM19BSPTCHM TM14BSPTCHM TM11BSPTCHM

28 19 14 11 28 19 14 11

1/16 and 1/8 1/4 and 3/8 1/2 and 3/4

3 4 4 4 3 4 4 4

0.240 0.310 0.470 0.620

0.250 0.312 0.500 0.625

0.393 0.580 0.787 1.546

2.375 3.000 3.500 4.000 58.00 84.00 84.00 93.00

THREADING

1/16 and 1/8 1/4 and 3/8 1/2 and 3/4

5.97 9.91

6.00

9.98

10.00 12.00 16.00

14.73 20.00 32.31

11.94 15.75

Weldon Flat

E: 52 - 55

E: 4

SPECIALS

Key on E: 1

= Imperial (in) = Metric (mm )

E: 10

www.alliedmachine.com | 1.330.343.4283

THREADING | Solid Carbide and Indexable Thread Mills

BSPP

Solid Carbide Thread Mills BSPP

Internal

DRILLING

R0.137P

55°

L 1

R0.137P

External

L 6

D 2

D 1

BSPP | Noncoolant

BORING

Thread Mill

Part No.

TPI (Pitch)

Min Thread Ø

D 1

D 2

L 6

L 1

Flutes

ThreadMills USA™

AccuThread® 856

TM28BSPP TM19BSPP TM14BSPP TM11BSPP TM28BSPPM TM19BSPPM

- - - -

28 19 14 11 28 19 19 14 14 11

1/16 and 1/8 1/4 and 3/8 1/2 and 3/4

3 4 4 4 3 4 4 4 5 4

0.240 0.310 0.470 0.620

0.250 0.312 0.500 0.625 10.00 12.00 12.00 16.00 16.00 6.00

0.572 0.737 1.143 1.365 14.53 18.72 28.41 29.03 34.47 34.67

2.500 3.000 3.500 4.000 58.00 73.00 84.00 84.00 93.00 93.00

TMBK0063-BSPPM TMBK0250-BSPPM

1/16 and 1/8 1/4 and 3/8

5.97 9.91

HDTM19BSPPM

3/8

11.94 11.94 15.75 15.75

REAMING

TM14BSPPM

TMBK0500-BSPPM

1/2 and 3/4

HDTM14BSPPM

3/4

TM11BSPPM

TMBK1000-BSPPM

Internal

R0.137P

55°

L 1

R0.137P

BURNISHING

External

L 6

D 2

D 1

BSPP | Coolant Through

Thread Mill

Part No.

TPI (Pitch)

Min Thread Ø

D 1

D 2

L 6

L 1

Flutes

ThreadMills USA™ TM28BSPPCH TM19BSPPCH TM14BSPPCH TM11BSPPCH TM28BSPPCHM TM19BSPPCHM TM14BSPPCHM TM11BSPPCHM

28 19 14 11 28 19 14 11

1/16 and 1/8 1/4 and 3/8 1/2 and 3/4

3 4 4 4 3 4 4 4

0.240 0.310 0.470 0.620

0.250 0.312 0.500 0.625

0.572 0.737 1.143 1.365 14.53 18.72 29.03 34.67

2.375 3.000 3.500 4.000 58.00 84.00 84.00 93.00

THREADING

1/16 and 1/8 1/4 and 3/8 1/2 and 3/4

5.97 9.91

6.00

10.00 12.00 16.00

11.94 15.75

Weldon Flat

E: 52 - 55

E: 4

SPECIALS

Key on E: 1

= Imperial (in) = Metric (mm )

www.alliedmachine.com | 1.330.343.4283

E: 11

NPT

THREADING | Solid Carbide and Indexable Thread Mills

Solid Carbide Thread Mills NPT | Noncoolant

Internal

30° 30°

DRILLING

90°

1° 47’

L 1

External

L 6

D 2

D 1

NPT | Noncoolant

BORING

Thread Mill

Part No.

TPI (Pitch)

Min Thread Ø

D 1

D 2

L 6

L 1

Flutes

ThreadMills USA™

AccuThread® 856 TMNK0063-NPT HDTMNK0125-NPT TMNK0250-NPT HDTMNK0250-NPT TMNK0500-NPT HDTMNK0750-NPT TMNK1000-NPT HDTMNK1000-NPT TMNK2500-NPT

TM27NPT

27 27 18 18 14 14

1/16 and 1/8

3 4 4 4 4 4 4 5 4 3 4 4 4 4 4 4 5 5

0.245 0.300 0.305 0.363 0.495 0.620 0.620 0.745 0.745

0.250 0.312 0.312 0.375 0.500 0.625 0.625 0.750 0.750

0.437 0.482 0.625 0.680 0.875 1.000 1.125 1.219 1.500 11.30 12.25 15.70 17.25 23.70 25.40 28.75 30.95 38.10

2.500 3.000 3.000 3.500 3.500 4.000 4.000 4.000 5.000 58.00 64.00 64.00 84.00 84.00 93.00 93.00

HDTM27NPT

1/8

TM18NPT

1/4 and 3/8 1/4 and 3/8 1/2 and 3/4

HDTM18NPT

TM14NPT

HDTM14NPT

3/4

TM11NPT

11.5 11.5

1 1

REAMING

HDTM11NPT

TM8NPT

2-1/2

TM27NPTM

TMNK0063-NPTM

27 27 18 18 14 14

1/16 and 1/8

5.95 7.62 7.75 9.22

6.00 8.00 8.00

HDTM27NPTM

1/8

TM18NPTM

TMNK0250-NPTM

1/4 and 3/8 1/4 and 3/8 1/2 and 3/4

HDTM18NPTM

10.00 12.00 16.00 16.00 20.00 20.00

TM14NPTM

TMNK0500-NPTM

11.95 15.75 15.75 18.92 19.75

HDTM14NPTM

3/4

TM11NPTM

TMNK1000-NPTM

11.5 11.5

1 1

HDTM11NPTM

105.00 115.00

TM8NPTM

TMNK2500-NPTM

2-1/2

BURNISHING

THREADING

Weldon Flat

E: 52 - 55

E: 4

SPECIALS

Key on E: 1

= Imperial (in) = Metric (mm )

E: 12

www.alliedmachine.com | 1.330.343.4283

THREADING | Solid Carbide and Indexable Thread Mills

NPT

Solid Carbide Thread Mills NPT | Coolant Through

Internal

30° 30°

DRILLING

90°

1° 47’

L 1

External

L 6

D 2

D 1

NPT | Coolant Through

BORING

Thread Mill

Part No.

TPI (Pitch)

Min Thread Ø

D 1

D 2

L 6

L 1

Flutes

ThreadMills USA™

TM27NPTCH

27 27 18 18 14 14

1/16 and 1/8

3 4 4 4 4 4 4 5 4 3 4 4 4 4 4 4 5 5

0.245 0.300 0.305 0.363 0.495 0.620 0.620 0.745 0.745

0.250 0.312 0.312 0.375 0.500 0.625 0.625 0.750 0.750

0.437 0.482 0.625 0.680 0.875 1.000 1.125 1.219 1.500 11.30 12.25 15.70 17.25 23.70 25.40 28.75 30.95 38.10

2.375 3.000 3.000 3.000 3.500 4.000 4.000 4.000 5.000 58.00 64.00 64.00 84.00 84.00 93.00 93.00

HDTM27NPTCH

1/8

TM18NPTCH

1/4 and 3/8 1/4 and 3/8 1/2 and 3/4

HDTM18NPTCH

TM14NPTCH

HDTM14NPTCH

3/4

TM11NPTCH

11.5 11.5

1 1

REAMING

HDTM11NPTCH

TM8NPTCH

2-1/2

TM27NPTCHM

27 27 18 18 14 14

1/16 and 1/8

5.95 7.62 7.75 9.22

6.00 8.00 8.00

HDTM27NPTCHM

1/8

TM18NPTCHM

1/4 and 3/8 1/4 and 3/8 1/2 and 3/4

HDTM18NPTCHM

10.00 12.00 16.00 16.00 20.00 20.00

TM14NPTCHM

11.95 15.75 15.75 18.92 19.75

HDTM14NPTCHM

3/4

TM11NPTCHM

11.5 11.5

1 1

HDTM11NPTCHM

105.00 115.00

TM8NPTCHM

2-1/2

BURNISHING

THREADING

Weldon Flat

E: 52 - 55

E: 4

SPECIALS

Key on E: 1

= Imperial (in) = Metric (mm )

www.alliedmachine.com | 1.330.343.4283

E: 13

NPTF

THREADING | Solid Carbide and Indexable Thread Mills

Solid Carbide Thread Mills NPTF | Noncoolant

Internal

30° 30°

DRILLING

90°

1° 47’

L 1

External

L 6

D 2

D 1

NPTF | Noncoolant

BORING

Thread Mill

Part No.

TPI (Pitch)

Min Thread Ø

D 1

D 2

L 6

L 1

Flutes

ThreadMills USA™

AccuThread® 856 TMNK0063-NPTF TMNK0250-NPTF TMNK0500-NPTF TMNK1000-NPTF TMNK2500-NPTF

TM27NPTF TM18NPTF TM14NPTF TM11NPTF TM8NPTF

27 18 14

1/16 and 1/8 1/4 and 3/8 1/2 and 3/4

3 4 4 4 4 3 4 4 4 5

0.245 0.305 0.495 0.620 0.745

0.250 0.312 0.500 0.625 0.750

0.437 0.625 0.875 1.125 1.500 11.30 15.70 23.70 28.75 38.10

2.500 3.000 3.500 4.000 5.000 58.00 64.00 84.00 93.00

11.5

2-1/2

TM27NPTFM TMNK0063-NPTFM TM18NPTFM TMNK0250-NPTFM TM14NPTFM TMNK0500-NPTFM TM11NPTFM TMNK1000-NPTFM

27 18 14

1/16 and 1/8 1/4 and 3/8 1/2 and 3/4

5.95 7.75

6.00 8.00

REAMING

11.95 15.75 19.75

12.00 16.00 20.00

11.5

TM8NPTFM

TMNK2500-NPTFM

2-1/2

115.00

BURNISHING

THREADING

Weldon Flat

E: 52 - 55

E: 4

SPECIALS

Key on E: 1

= Imperial (in) = Metric (mm )

E: 14

www.alliedmachine.com | 1.330.343.4283

THREADING | Solid Carbide and Indexable Thread Mills

NPTF

Solid Carbide Thread Mills NPTF | Coolant Through

Internal

30° 30°

DRILLING

90°

1° 47’

L 1

External

L 6

D 2

D 1

NPTF | Coolant Through

BORING

Thread Mill

Part No.

TPI (Pitch)

Min Thread Ø

D 1

D 2

L 6

L 1

Flutes

ThreadMills USA™ TM27NPTFCH TM18NPTFCH TM14NPTFCH TM11NPTFCH TM8NPTFCH TM27NPTFCHM TM18NPTFCHM TM14NPTFCHM TM11NPTFCHM TM8NPTFCHM

27 18 14

1/16 and 1/8 1/4 and 3/8 1/2 and 3/4

3 4 4 4 4 3 4 4 4 5

0.245 0.305 0.495 0.620 0.745

0.250 0.312 0.500 0.625 0.750

0.437 0.625 0.875 1.125 1.500 11.30 15.70 23.70 28.75 38.10

2.375 3.000 3.500 4.000 5.000 58.00 64.00 84.00 93.00

11.5

2-1/2

27 18 14

1/16 and 1/8 1/4 and 3/8 1/2 and 3/4

5.95 7.75

6.00 8.00

REAMING

11.95 15.75 19.75

12.00 16.00 20.00

11.5

2-1/2

115.00

BURNISHING

THREADING

Weldon Flat

E: 52 - 55

E: 4

SPECIALS

Key on E: 1

= Imperial (in) = Metric (mm )

www.alliedmachine.com | 1.330.343.4283

E: 15

NPS

THREADING | Solid Carbide and Indexable Thread Mills

Solid Carbide Thread Mills NPS

Internal

30° 30°

DRILLING

L 1

External

L 6

D 2

D 1

NPS | Noncoolant

BORING

Thread Mill

Part No.

TPI (Pitch)

Min Thread Ø

D 1

D 2

L 6

L 1

Flutes

ThreadMills USA™

TM27NPS TM18NPS TM14NPS TM11NPS

27 18 14

1/8

3 4 4 4 3 4 4 4

0.245 0.370 0.490 0.620

0.250 0.375 0.500 0.625

0.630 0.889 1.288 1.392 16.00 22.60 32.70 35.35

2.500 3.500 3.500 4.000 58.00 84.00 84.00 93.00

1/4 and 3/8 1/2 and 3/4

11.5

TM27NPSM TM18NPSM TM14NPSM TM11NPSM

27 18 14

1/8

5.95 9.40

6.00

1/4 and 3/8 1/2 and 3/4

10.00 12.00 16.00

11.94 15.75

REAMING

11.5

Internal

30° 30°

L 1

External

L 6

BURNISHING

D 2

D 1

NPS | Coolant Through

Thread Mill

Part No.

TPI (Pitch)

Min Thread Ø

D 1

D 2

L 6

L 1

Flutes

ThreadMills USA™

TM27NPSCH TM18NPSCH TM14NPSCH TM11NPSCH TM27NPSCHM TM18NPSCHM TM14NPSCHM TM11NPSCHM

27 18 14

1/8

3 4 4 4 3 4 4 4

0.245 0.370 0.490 0.620

0.250 0.375 0.500 0.625

0.630 0.889 1.288 1.392 16.00 22.60 32.70 35.35

2.375 3.000 3.500 4.000 58.00 84.00 84.00 93.00

1/4 and 3/8 1/2 and 3/4

THREADING

11.5

27 18 14

1/8

5.95 9.40

6.00

1/4 and 3/8 1/2 and 3/4

10.00 12.00 16.00

11.94 15.75

11.5

Weldon Flat

E: 52 - 55

E: 4

SPECIALS

Key on E: 1

= Imperial (in) = Metric (mm )

E: 16

www.alliedmachine.com | 1.330.343.4283

THREADING | Solid Carbide and Indexable Thread Mills

NPSF

Solid Carbide Thread Mills NPSF

Internal

30° 30°

DRILLING

L 1

External

L 6

D 2

D 1

NPSF | Noncoolant

BORING

Thread Mill

Part No.

TPI (Pitch)

Min Thread Ø

D 1

D 2

L 6

L 1

Flutes

ThreadMills USA™

TM27NPSF TM18NPSF TM14NPSF TM11NPSF TM27NPSFM TM18NPSFM TM14NPSFM TM11NPSFM

27 18 14

1/8

3 4 4 4 3 4 4 4

0.245 0.370 0.490 0.620

0.250 0.375 0.500 0.625

0.630 0.889 1.288 1.392 16.00 22.60 32.70 35.35

2.500 3.500 3.500 4.000 58.00 84.00 84.00 93.00

1/4 and 3/8 1/2 and 3/4

11.5

27 18 14

1/8

5.95 9.40

6.00

1/4 and 3/8 1/2 and 3/4

10.00 12.00 16.00

11.94 15.75

REAMING

11.5

Internal

30° 30°

L 1

External

L 6

BURNISHING

D 2

D 1

NPSF | Coolant Through

Thread Mill

Part No.

TPI (Pitch)

Min Thread Ø

D 1

D 2

L 6

L 1

Flutes

ThreadMills USA™ TM27NPSFCH TM18NPSFCH TM14NPSFCH TM11NPSFCH TM27NPSFCHM TM18NPSFCHM TM14NPSFCHM TM11NPSFCHM

27 18 14

1/8

3 4 4 4 3 4 4 4

0.245 0.370 0.490 0.620

0.250 0.375 0.500 0.625

0.630 0.889 1.288 1.392 16.00 22.60 32.70 35.35

2.375 3.000 3.500 4.000 58.00 84.00 84.00 93.00

1/4 and 3/8 1/2 and 3/4

THREADING

11.5

27 18 14

1/8

5.95 9.40

6.00

1/4 and 3/8 1/2 and 3/4

10.00 12.00 16.00

11.94 15.75

11.5

Weldon Flat

E: 52 - 55

E: 4

SPECIALS

Key on E: 1

= Imperial (in) = Metric (mm )

www.alliedmachine.com | 1.330.343.4283

E: 17

THREADING | Solid Carbide and Indexable Thread Mills

Solid Carbide Thread Mills UN | Noncoolant

Internal

DRILLING

1/4P

60°

L 1

1/8P

External

L 6

D 2

D 1

UN | Noncoolant

BORING

Thread Mill

Part No.

TPI (Pitch)

Min Thread Ø

D 1

D 2

L 6

L 1

Flutes

ThreadMills USA™

AccuThread® 856

TM08664 TM08656 TM09948 TM12544 TM12540 TM16436 TM13832 TM16432 TM19032 TM50032 TM19028 TM25028 TM50028 TM19024 TM31224 TM37524 TM50024 TM25020

64 56 48 44 40 36 32 32 32 32 32 28 28 28 24 24 24 24 24 20 20 20 20

#2 #2 #3 #5 #4 #8 #6 #8

3* 3* 3*

0.065 0.065 0.075 0.095 0.085 0.115 0.100 0.115 0.120 0.150 0.370 0.120 0.180 0.370 0.120 0.145 0.235 0.285 0.370 0.180 0.195 0.335 0.370

0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.187 0.375 0.125 0.187 0.375 0.125 0.187 0.250 0.312 0.375 0.187 0.250 0.375 0.375

0.125 0.125 0.167 0.228 0.175 0.250 0.218 0.250 0.312 0.312 1.000 0.312 0.500 1.000 0.312 0.312 0.625 0.750 1.000 0.500 0.500 0.875 1.000

2.000 2.000 2.000 2.000 2.000 2.000 2.000 2.000 2.000 2.500 3.500 2.000 2.500 3.500 2.000 2.500 2.500 3.000 3.500 2.500 2.500 3.500 3.500

TMUK0002-56

- -

TMUK0004-40

3 3 3 3 3 6 3 3 6 3 3 3 4 6 3 3 4 6

TMUK0006-32 TMUK0008-32 TMUK0010-32

REAMING

#10 #10 1/2 #10 1/4 1/2 #10 #10 3/8 1/2 1/4 1/4 5/16 7/16

HDTM19032

- -

TMUK0010-28 TMUK0250-28

TMUK0010-24

HDTM19024

TMUK0313-24 TMUK0375-24

BURNISHING

TMUK0250-20

HDTM25020

TM43720 TM50020

TMUK0438-20

1/2

*Straight fluted

THREADING

Weldon Flat

E: 52 - 55

E: 4

SPECIALS

Key on E: 1

= Imperial (in) = Metric (mm )

E: 18

www.alliedmachine.com | 1.330.343.4283

THREADING | Solid Carbide and Indexable Thread Mills

Solid Carbide Thread Mills UN | Noncoolant (continued)

Internal

DRILLING

1/4P

60°

L 1

1/8P

External

L 6

D 2

D 1

UN | Noncoolant

BORING

Thread Mill

Part No.

TPI (Pitch)

Min Thread Ø

D 1

D 2

L 6

L 1

Flutes

ThreadMills USA™

AccuThread® 856

TM31218

TMUK0313-18

18 18 18 16 16 16 14 14 13 13 12 12 12 11 11 10 10

5/16 5/16 9/16 3/8 3/8 3/4 7/8 1/2 1/2 7/16 9/16

3 3 4 4 4 4 4 4 4 4 4 4 6 4 4 4 4 4 4 4 6 5 5

0.235 0.245 0.370 0.285 0.300 0.490 0.305 0.490 0.350 0.400 0.370 0.495 0.745 0.470 0.470 0.495 0.495 0.620 0.620 0.620 0.745 0.745 0.745

0.250 0.312 0.375 0.312 0.375 0.500 0.312 0.500 0.375 0.500 0.375 0.500 0.750 0.500 0.500 0.500 0.500 0.625 0.625 0.625 0.750 0.750 0.750

0.625 0.625 0.875 0.750 0.750 1.250 0.750 1.250 0.875 0.875 0.875 1.250 1.500 1.250 1.455 1.250 1.600 1.375 1.778 1.375 2.000 1.572 1.500

2.500 3.000 3.500 3.000 3.500 3.500 3.000 3.500 3.500 3.500 3.500 3.500 4.000 3.500 3.500 3.500 4.000 4.000 4.000 4.000 4.500 4.500 4.500

HDTM31218

TM56218 TM37516

TMUK0563-18 TMUK0375-16

HDTM37516 TM75016 TM43714 TM87514 TM50013 TM56212 TM75012 TM10012 TM62511 HDTM50013 TM62511-XL

TMUK0750-16 TMUK0438-14 TMUK0875-14 TMUK0500-13

REAMING

TMUK0563-12 TMUK0750-12

3/4

TMUK0625-11 TMUK0625-11XL TMUK0750-10 TMUK0750-10XL TMUK0875-9 TMUK0875-9XL TMUK1000-8 TMUK1000-8XL

5/8 5/8 3/4 3/4 7/8 7/8

TM75010

TM75010-XL

TM87509

9 9 8 8 7 6

TM87509-XL

BURNISHING

TM10008

1 1

TM10008-XL

TM12507 TM13706

- -

1-1/8 1-3/8

THREADING

Weldon Flat

E: 52 - 55

E: 4

SPECIALS

Key on E: 1

= Imperial (in) = Metric (mm )

www.alliedmachine.com | 1.330.343.4283

E: 19

THREADING | Solid Carbide and Indexable Thread Mills

Solid Carbide Thread Mills UN | Noncoolant

Internal

DRILLING

1/4P

60°

L 1

1/8P

External

L 6

D 2

D 1

UN | Noncoolant

BORING

Thread Mill

Part No.

TPI (Pitch)

Min Thread Ø

D 1

D 2

L 6

L 1

Flutes

ThreadMills USA™

AccuThread® 856 TMUK0002-64M TMUK0002-56M TMUK0003-48M TMUK0005-44M TMUK0004-40M TMUK0008-36M TMUK0006-32M TMUK0008-32M TMUK0010-32M

TM08664M TM08656M TM09948M TM12544M TM12540M TM16436M TM13832M TM16432M TM19032M TM50032M TM19028M TM25028M HDTM19032M

64 56 48 44 40 36 32 32 32 32 32 28 28 28 28 24 24 24 24 24 20 20 20 20

#2 #2 #3 #5 #4 #8 #6 #8

3* 3* 3*

1.65 1.65 1.80 2.40 2.20 3.00 2.50 3.20 3.80 3.80 9.40 3.80 4.75 7.90 9.40 3.70 3.70 5.95 7.25 9.40 4.75 4.95 8.75 9.40

3.00 3.00 3.00 3.00 3.00 4.00 3.00 4.00 4.00 4.00 4.00 6.00 8.00 4.00 4.00 6.00 8.00

3.20 3.20 3.75 4.65 4.45 6.35 5.55 6.35 7.95 7.95

39.00 39.00 39.00 39.00 39.00 51.00 39.00 51.00 51.00 51.00 84.00 51.00 58.00 64.00 84.00 51.00 51.00 58.00 64.00 84.00 58.00 58.00 73.00 84.00

3 3 3 3 3 6 3 3 4 6 3 3 3 4 6 3 3 4 6

REAMING

#10 #10 1/2 #10 1/4 1/2 #10 #10 3/8 1/2 1/4 1/4 7/16 5/16 7/16

- -

10.00

25.40

TMUK0010-28M TMUK0250-28M TMUK0438-28M

8.20

12.70 19.95 25.40

TM50028M TM19024M

10.00

TMUK0010-24M

8.50 8.50

HDTM19024M

TM31224M TM37524M TM50024M TM25020M

TMUK0313-24M TMUK0375-24M

16.00 19.00 25.40 12.70 12.70 22.85 25.40

BURNISHING

10.00

TMUK0250-20M

6.00 6.00

HDTM25020M

TM43720M TM50020M

TMUK0438-20M

10.00 10.00

1/2

*Straight fluted

THREADING

Weldon Flat

E: 52 - 55

E: 4

SPECIALS

Key on E: 1

= Imperial (in) = Metric (mm )

E: 20

www.alliedmachine.com | 1.330.343.4283

THREADING | Solid Carbide and Indexable Thread Mills

Solid Carbide Thread Mills UN | Noncoolant (continued)

Internal

DRILLING

1/4P

60°

L 1

1/8P

External

L 6

D 2

D 1

UN | Noncoolant

BORING

Thread Mill

Part No.

TPI (Pitch)

Min Thread Ø

D 1

D 2

L 6

L 1

Flutes

ThreadMills USA™

AccuThread® 856 TMUK0313-18M

TM31218M

18 18 18 16 16 16 14 14 13 13 12 12 12 11 11 10 10

5/16 5/16 9/16 3/8 3/8 3/4 7/8 1/2 1/2 7/16 9/16

3 3 4 4 4 4 4 4 4 4 4 4 6 4 4 4 4 4 4 4 6 5 5

5.95 6.22 9.90 7.25 7.62

6.00 8.00

17.00 15.87 22.65 19.05 19.05 31.75 20.00 32.70 23.50 23.50 23.35 31.75 38.10 32.40 37.00 33.00 40.70 36.75 45.20 35.00 50.80 36.30 38.10

58.00 64.00 73.00 64.00 84.00 84.00 64.00 84.00 73.00 84.00 73.00 84.00

HDTM31218M

TM56218M TM37516M

TMUK0563-18M TMUK0375-16M

10.00

8.00

HDTM37516M TM75016M TM43714M TM87514M TM50013M TM56212M TM75012M TM10012M TM62511M HDTM50013M TM62511M-XL

10.00 12.00

TMUK0750-16M TMUK0438-14M TMUK0875-14M TMUK0500-13M

11.95

7.75

8.00

REAMING

11.95

12.00 10.00 12.00 10.00 12.00 20.00 12.00 12.00 12.00 12.00 16.00 16.00 16.00 20.00 20.00 20.00

9.40

10.16

TMUK0563-12M TMUK0750-12M

9.90

3/4

11.95 18.92 11.95 11.95 11.95 11.95 15.75 15.75 15.75 19.90 19.90 19.90

105.00

TMUK0625-11M TMUK0625-11XLM TMUK0750-10M TMUK0750-10XLM TMUK0875-9M TMUK0875-9XLM TMUK1000-8M TMUK1000-8XLM TMUK1125-7M TMUK1375-6M

5/8 5/8 3/4 3/4 7/8 7/8

84.00

100.00

TM75010M

84.00

TM75010M-XL

100.00

TM87509M

9 9 8 8 7 6

93.00

TM87509M-XL

100.00

BURNISHING

TM10008M

1 1

93.00

TM10008M-XL

115.00 105.00 105.00

TM12507M TM13706M

1-1/8 1-3/8

THREADING

Weldon Flat

E: 52 - 55

E: 4

SPECIALS

Key on E: 1

= Imperial (in) = Metric (mm )

www.alliedmachine.com | 1.330.343.4283

E: 21

THREADING | Solid Carbide and Indexable Thread Mills

Solid Carbide Thread Mills UN | Coolant Through

Internal

DRILLING

1/4P

60°

L 1

1/8P

External

L 6

D 2

D 1

UN | Coolant Through

BORING

Thread Mill

Part No.

TPI (Pitch)

Min Thread Ø

D 1

D 2

L 6

L 1

Flutes

ThreadMills USA™

TM08664CH TM08656CH TM09948CH TM12544CH TM12540CH TM16436CH TM13832CH TM16432CH TM19032CH TM50032CH TM19028CH TM25028CH TM50028CH TM19024CH TM31224CH TM37524CH TM50024CH TM25020CH HDTM19032CH HDTM19024CH HDTM25020CH

64 56 48 44 40 36 32 32 32 32 32 28 28 28 24 24 24 24 24 20 20 20 20

#2 #2 #3 #5 #4 #8 #6 #8

3* 3* 3*

0.065 0.065 0.075 0.095 0.085 0.115 0.100 0.115 0.150 0.150 0.370 0.120 0.180 0.370 0.145 0.145 0.235 0.285 0.370 0.180 0.195 0.335 0.370

0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.187 0.187 0.375 0.125 0.187 0.375 0.187 0.187 0.250 0.312 0.375 0.187 0.250 0.375 0.375

0.125 0.125 0.167 0.228 0.175 0.250 0.218 0.250 0.312 0.312 1.000 0.312 0.500 1.000 0.312 0.312 0.625 0.750 1.000 0.500 0.500 0.875 1.000

1.500 1.500 1.500 1.500 1.500 1.500 1.500 1.500 2.375 2.375 3.500 1.500 2.375 3.500 2.375 2.375 2.375 3.000 3.500 2.375 2.375 3.000 3.500

3 3 3 3 3 6 3 3 6 3 3 3 4 6 3 3 4 6

REAMING

#10 #10 1/2 #10 1/4 1/2 #10 #10 3/8 1/2 1/4 1/4 5/16 7/16

BURNISHING

TM43720CH TM50020CH

1/2

*Straight fluted

THREADING

Weldon Flat

E: 52 - 55

E: 4

SPECIALS

Key on E: 1

= Imperial (in) = Metric (mm )

E: 22

www.alliedmachine.com | 1.330.343.4283

Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80

Made with FlippingBook - Online catalogs