TMPG_US-EN

Standard Program Example

4 Arc on G03 X-0.0256 Y0.0256 Z0.0063 I-0.0256 J0.0000 F12.69

Arc on to engage the tool to the major thread Ø while moving the tool up in the Z-axis 1/8 pitch. NOTE: X and Y is the end point. I and J is the center point of the arc.

Y+ (J+)

X+ (I+)

X- (I-)

Y- (J-)

5 Full pass (see page #’s for tapered thread example) G03 X0.0000 Y0.0000 Z0.0500 I0.0000 J-0.0513 F12.69

Interpolate the thread mill inside the major thread Ø while moving the tool up 1 pitch in the Z axis.

Y+ (J+)

X+ (I+)

X- (I-)

Y- (J-)

CONTINUE

THREAD MILLING REFERENCE GUIDE | 15