TMPG_US-EN

Speeds and Feeds | Metric

Recommended Feed (mm/tooth) by Cutter Diameter

1.50 to 3.18

3.19 to 4.76

4.77 to 6.35

6.36 to 7.94

7.95 to 9.53

9.54 to 12.70

12.71 to 15.88

15.89 to 19.05 0.064 0.064 0.064 0.064 0.064 0.064 0.064 0.051 0.051 0.051 0.051 0.051 0.051 0.051 0.051 0.051 0.051 0.051 0.051 0.064 0.064 0.064

0.010 0.013 0.018 0.023 0.025 0.038 0.051 0.010 0.013 0.018 0.023 0.025 0.038 0.051 0.010 0.013 0.018 0.023 0.025 0.038 0.051 0.010 0.013 0.018 0.023 0.025 0.038 0.051 0.010 0.013 0.018 0.023 0.025 0.038 0.051 0.010 0.013 0.018 0.023 0.025 0.038 0.051 0.010 0.013 0.018 0.023 0.025 0.038 0.051 0.010 0.013 0.015 0.020 0.025 0.038 0.046 0.010 0.013 0.015 0.020 0.025 0.038 0.046 0.010 0.013 0.015 0.020 0.025 0.038 0.046 0.010 0.013 0.015 0.020 0.025 0.038 0.046 0.010 0.013 0.015 0.020 0.025 0.038 0.046 0.010 0.013 0.015 0.020 0.025 0.038 0.046 0.010 0.013 0.015 0.020 0.025 0.038 0.046 0.010 0.013 0.015 0.020 0.025 0.038 0.046 0.010 0.013 0.015 0.020 0.025 0.038 0.046 0.010 0.013 0.015 0.020 0.025 0.038 0.046 0.010 0.013 0.015 0.020 0.025 0.038 0.046 0.010 0.013 0.015 0.020 0.025 0.038 0.046 0.010 0.013 0.018 0.023 0.025 0.038 0.051 0.010 0.013 0.018 0.023 0.025 0.038 0.051 0.010 0.013 0.018 0.023 0.025 0.038 0.051 **Refer to recommended pass chart on page 43 when referencing material **machinability

THREAD MILLING REFERENCE GUIDE | 39