TMPG_US-EN

Speeds and Feeds | Metric

Recommended Feed (mm/tooth) by Cutter Diameter

1.50 to 3.18

3.19 to 4.76

4.77 to 6.35

6.36 to 7.94

7.95 to 9.53

9.54 to 12.70

12.71 to 15.88

15.89 to 19.05

0.008 0.010 0.015 0.020 0.023 0.025 0.030 0.038 0.008 0.010 0.015 0.020 0.023 0.025 0.030 0.038 0.010 0.013 0.015 0.020 0.023 0.025 0.038 0.051 0.010 0.013 0.015 0.020 0.023 0.025 0.038 0.051 0.010 0.013 0.015 0.020 0.023 0.025 0.038 0.051 0.010 0.013 0.015 0.020 0.023 0.025 0.038 0.051 0.010 0.013 0.018 0.023 0.025 0.038 0.051 0.064 0.010 0.013 0.018 0.023 0.025 0.038 0.051 0.064 0.010 0.013 0.018 0.023 0.025 0.038 0.051 0.064 0.010 0.013 0.018 0.023 0.025 0.038 0.051 0.064 0.010 0.013 0.018 0.023 0.025 0.038 0.051 0.064 0.010 0.013 0.018 0.023 0.025 0.038 0.051 0.064 0.010 0.013 0.018 0.023 0.025 0.038 0.051 0.064 0.013 0.015 0.023 0.025 0.038 0.051 0.064 0.076 0.013 0.015 0.023 0.025 0.038 0.051 0.064 0.076 0.013 0.015 0.023 0.025 0.038 0.051 0.064 0.076 0.013 0.015 0.023 0.025 0.038 0.051 0.064 0.076 **Refer to recommended pass chart on page 43 when referencing material **machinability **Uncoated thread mills are recommended for cast aluminum applications

THREAD MILLING REFERENCE GUIDE | 41

Made with FlippingBook - Online catalogs