AMPC-E_US-EN
ISO
THREADING | Solid Carbide and Indexable Thread Mills
Solid Carbide Thread Mills ISO | Noncoolant
A
Internal
DRILLING
1/4P
60°
L 1
1/8P
External
L 6
D 2
D 1
B
ISO | Noncoolant
BORING
Thread Mill
Part No.
Min Thread Ø
D 1
D 2
L 6
L 1
Pitch 0.40 0.45 0.50 0.50 0.50 0.70 0.75 0.75 0.75 0.80 1.00 1.00 1.25 1.50 1.50 1.50 1.50 1.75 2.00 2.00 2.50 3.00 3.50 4.00
Flutes
ThreadMills USA™
AccuThread® 856
TM20040 TM25045 TM30050 TM60050 TM10050 TM40070 TM45075 TM80075 TM10075 TM50080 TM60100 TM12100 TM80125 TM10150 TM14150 TM18150 TM20150 TM12175 TM14200 TM16200 TM20250 TM24300 TM30350 TM36400
- - - - - -
M2
3* 3* 3*
0.059 0.059 0.085 0.181 0.310 0.115 0.120 0.235 0.310 0.120 0.170 0.360 0.235 0.300 0.370 0.490 0.620 0.360 0.429 0.470 0.495 0.620 0.620 0.745
0.125 0.125 0.125 0.187 0.312 0.125 0.125 0.250 0.312 0.125 0.187 0.375 0.250 0.312 0.375 0.500 0.625 0.375 0.500 0.500 0.500 0.625 0.625 0.750
0.126 0.142 0.178 0.473 0.591 0.276 0.266 0.625 0.591 0.312 0.500 0.875 0.625 0.750 0.875 1.250 1.418 0.875 1.103 1.250 1.250 1.375 1.516 1.575
2.000 2.000 2.000 2.500 3.000 2.000 2.000 2.500 3.000 2.000 2.500 3.500 2.500 3.000 3.500 3.500 4.000 3.500 3.500 3.500 3.500 4.000 4.000 4.500
M2.5
M3 M6
3 4 3 3 3 4 3 3 4 3 4 4 4 5 4 4 4 4 4 4 5
C
M10
M4
TMMK0450-075 TMMK0800-075
M4.5
REAMING
M8
-
M10
TMMK0500-080 TMMK0600-100 TMMK1200-100 TMMK0800-125 TMMK1000-150 TMMK1400-150 TMMK1800-150
M5 M6
M12
M8
M10 M14 M18 M20 M12 M14 M16 M20 M24 M30 M36
D
-
TMMK1200-175
-
BURNISHING
TMMK1600-200 TMMK2000-250 TMMK2400-300
- -
*Straight fluted
E
THREADING
X
Weldon Flat
E: 52 - 55
E: 4
SPECIALS
To order a thread mill with a Weldon flat, replace the leading TM designator with TW (available for inch shanks 3/8 and above, or metric shanks 6 mm and above) Example: Cylindrical shank = TM NK0500-NPT | Weldon shank flat = TW NK0500-NPT NOTE: Weldon flats have a minimum order quantity of 2 pieces
Key on E: 1
= Imperial (in) = Metric (mm )
E: 26
www.alliedmachine.com | 1.330.343.4283
Made with FlippingBook - Online catalogs