B10-I_US-EN

Wohlhaupter® MultiBore MVS clamping tools catalog

Drilling

Reaming

Burnishing

Threading

Wohlhaupter ® BORING Modular Tool Holders

Specials

S E C T I O N B10-I Modular Tool Holders

Wohlhaupter ® Modular Tool Holders Adapter Sleeves | Drill Chucks | Collet Chucks | Milling Arbors | Holding Arbors | Hydraulic Clamping Chucks Tapping Chucks | Boring Bar Blanks

Clamping Tools with MVS ConnecƟon Wohlhaupter offers a complete range of tool holders that incorporates the MVS connecƟon. Our clamping tools allow for smaller MVS tools to connect and provide a quick and inexpensive alternaƟve to special tooling. The clamping tools also feature coolant-through capabiliƟes.

Your safety and the safety of others is very important. This catalog contains important safety messages. Always read and follow all safety precauƟons. This triangle is a safety hazard symbol. It alerts you to potenƟal safety hazards that can cause tool failure and serious injury. When you see this symbol in the catalog, look for a related safety message that may be near this triangle or referred to in the nearby text. There are safety signal words also used in the catalog. Safety messages follow these words. WARNING (shown above) means that failure to follow the precauƟons in this message could result in tool failure and serious injury. NOTICE means that failure to follow the precauƟons in this message could result in damage to the tool or machine but not result in personal injury. NOTE and IMPORTANT are also used. These are important that you read and follow but are not safety-related. Visit www.alliedmachine.com for the most up-to-date informaƟon and procedures. WARNING

Applicable Industries

Aerospace Agriculture

AutomoƟve

Firearms

General Machining

Oil & Gas

Renewable Energy

Reference Icons The following icons will appear throughout the catalog to help you navigate between products.

Modular Tool Holders Table of Contents

Adapter Side Lock for Cylindrical Shanks . . . . . . . . . . . . . . . . . 2

MVS ConnecƟon Color Guide Detailed instrucƟons and informaƟon regarding the MVS connecƟon(s)

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

Drill Chucks . . . . . . . . . . . . . . . . . 3

Recommended Cuƫng Data Speed and feed recommendaƟons for opƟmum and safe boring

Collet Chucks . . . . . . . . . . . . . . . . . 4

Milling Machine Arbors . . . . . . . . . . . . . . . . . 5

Coolant-Through OpƟon Indicates that the product is coolant through

Holding Arbors for Milling CuƩers . . . . . . . . . . . . . . . . . 6

Clamping and Tapping Chucks . . . . . . . . . . . . . . . . . 7

Boring Bar Blanks . . . . . . . . . . . . . . . . . 8

Accessories for Adapter Sleeves Thread Pins and Ball Pressure Screws . . . . . . . . . . . . . . . . . 9 Adapter Sleeves for Tap Shanks . . . . . . . . . . . . . . . . . 10 Micro Clamping Chucks . . . . . . . . . . . . . . . . . 11

Accessories for Drill Chucks . . . . . . . . . . . . . . . . . 12

Collet Chucks for Erickson System . . . . . . . . . . . . . . . . . 13

Accessories for Collet Chucks . . . . . . . . . . . . . . 14 - 30

Sealing Disks for Collet Chucks . . . . . . . . . . . . . . 31 - 34

Accessories for Milling Machine Arbors . . . . . . . . . . . . . . . . . 35

Reducing Sleeves for Hydraulic Clamping Chucks . . . . . . . . . . . . . . . . . 36

Quick Change Adapters . . . . . . . . . . . . . . 37 - 40

Service Keys . . . . . . . . . . . . . . . . . 41

B10-I: 1

BORING | Modular Tool Holders

Adapter Side Lock for Cylindrical Shanks DIN 1835B Clamping Diameter Range: 0.236" - 1.575" (6.00 mm - 40.00 mm)

A

X 1

L 1

B

D 2 D 1

D 5

Threaded Hole for Balancing Screw

L 2

C

D 3

D

MVS ConnecƟon

Clamping Range

Adapter Sleeve

E

D 2 | D 1 32 - 18 32 - 18 32 - 18 40 - 22 40 - 22 50 - 28 50 - 28 50 - 28 50 - 28 50 - 28 50 - 28 50 - 28 63 - 36 63 - 36 63 - 36 80 - 36 32 - 18 32 - 18 32 - 18 40 - 22 40 - 22 50 - 28 50 - 28 50 - 28 50 - 28 50 - 28 50 - 28 50 - 28 63 - 36 63 - 36 63 - 36 80 - 36

D 3

X 1

L 1

L 2

D 5

Weight

Balancing Screw Part No.

228022 228023 228024 228025 228026 162015 162016 162017 162018 162019 228014 162020 161024 161026 161027 161028 228022 228023 228024 228025 228026 162015 162016 162017 162018 162019 228014 162020 161024 161026 161027 161028

0.236 0.315 0.394 0.472 0.551 0.236 0.315 0.394 0.472 0.630 0.709 0.787 0.787 0.984 1.260 1.575

1.417 1.417 1.890 2.047 2.126 1.417 1.417 1.732 1.732 1.929 1.929 2.362 1.929 2.953 2.953 3.346 36.00 36.00 48.00 52.00 54.00 36.00 36.00 44.00 44.00 49.00 49.00 60.00 49.00 75.00 75.00 85.00

0.906 0.906

1.575 1.575 1.732 1.929 1.929 1.575 1.575 1.732 1.929 2.047 2.047 2.126 2.126 2.323 2.480 2.874 40.00 40.00 44.00 49.00 49.00 40.00 40.00 44.00 49.00 52.00 52.00 54.00 54.00 59.00 63.00 73.00

0.984 1.102 1.378 1.654 1.732 0.984 1.102 1.378 1.654 1.890 1.890 2.047 2.047 2.480 2.835 3.150 25.00 28.00 35.00 42.00 44.00 25.00 28.00 35.00 42.00 48.00 48.00 52.00 52.00 63.00 72.00 80.00

0.441 (lbs) 0.441 (lbs) 0.661 (lbs) 1.102 (lbs) 1.323 (lbs) 0.882 (lbs) 0.882 (lbs) 1.102 (lbs) 1.102 (lbs) 2.205 (lbs) 2.205 (lbs) 2.646 (lbs) 2.425 (lbs) 4.189 (lbs) 4.851 (lbs) 5.512 (lbs)

M5 x .8 x 6 M5 x .8 x 6 M5 x .8 x 6 M5 x .8 x 8 M5 x .8 x 8 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 15 M6 x 1 x 15 M6 x 1 x 15 M5 x .8 x 6 M5 x .8 x 6 M5 x .8 x 6 M5 x .8 x 8 M5 x .8 x 8 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 15 M6 x 1 x 15 M6 x 1 x 15

- - -

F

0.906 0.906 1.220 1.220 1.417 1.417

G

-

1.417

- - -

H

6.00 8.00

23.00 23.00

0.20 (kg) 0.20 (kg) 0.30 (kg) 0.50 (kg) 0.60 (kg) 0.40 (kg) 0.40 (kg) 0.50 (kg) 0.50 (kg) 1.00 (kg) 1.00 (kg) 1.20 (kg) 1.10 (kg) 1.90 (kg) 2.20 (kg) 2.50 (kg)

I

10.00 12.00 14.00

- - -

6.00 8.00

23.00 23.00 31.00 31.00 36.00 36.00

J

10.00 12.00 16.00 18.00 20.00 20.00 25.00 32.00 40.00

-

K

36.00

- - -

NOTE: Balanced 10 gmm/kg. NOTE: When using a ball pressure screw instead of a thread pin, it's similar to DIN 1835E, without axial adjustment. See ball pressure screws on page B10-I: 9.

L

M

B10-M: 12-19

B10: vi-vii

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

INDEX

B10-I: 2

www.alliedmachine.com | 1.330.343.4283

BORING | Modular Tool Holders

Drill Chucks for Clockwise and Counterclockwise RotaƟon Clamping Diameter Range: 0.019" - 0.629" (0.50 mm - 16.00 mm)

A

X 1

S

B

D 2 D 1

D 5

A

C

D

MVS ConnecƟon

Clamping Range

Drill Chuck

D 2 | D 1 50 - 28 50 - 28 63 - 36 63 - 36 50 - 28 50 - 28 63 - 36 63 - 36

A

X 1

D 5

S

Weight

Part No. 209088 209089 209090 209091 209088 209089 209090 209091

0.019 - 0.511 0.098 - 0.629 0.019 - 0.511 0.098 - 0.629 0.50 - 13.00 2.50 - 16.00 0.50 - 13.00 2.50 - 16.00

3.150 3.346 3.150 3.346 80.00 85.00 80.00 85.00

1.969 2.244 1.969 2.244 50.00 57.00 50.00 57.00

s6 / B s6 / B s6 / B s6 / B s6 / B s6 / B s6 / B s6 / B

2.425 (lbs) 2.866 (lbs) 2.866 (lbs) 3.307 (lbs)

E

1.10 (kg) 1.30 (kg) 1.30 (kg) 1.50 (kg)

F

G

H

I

J

K

L

M

B10-M: 12-19

B10: vi-vii

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-I: 3

BORING | Modular Tool Holders

Collet Chucks ISO 10897 (DIN 6388) | ISO 15488 (DIN 6499) Clamping Diameter Range: 0.078" - 1.259" (2.00 mm - 32.00 mm) X 1

A

X 1

L 1

B

4 mm

Form A

D 2 D 1

D 5

D

C

Form B

Collet Chucks ISO 10897 (DIN 6388) | Diameter Range: 0.078" - 1.259" (2.00 mm - 32.00 mm) MVS ConnecƟon Clamping Range Collet Chuck

D

D 2 | D 1 40 - 22 50 - 28 50 - 28 63 - 36 63 - 36 40 - 22 50 - 28 50 - 28 63 - 36 63 - 36

D

X 1 *

L 1

D 5

Nominal Size

Weight

Part No. 209082 162011 209083 161016 161098 209082 162011 209083 161016 161098

0.078 - 0.629 0.078 - 0.629 0.078 - 0.984 0.078 - 0.984 0.157 - 1.259 2.00 - 16.00 2.00 - 16.00 2.00 - 25.00 2.00 - 25.00 4.00 - 32.00

16 16 25 25 32 16 16 25 25 32

2.520 2.480 2.913 2.913 3.504 64.00 63.00 74.00 74.00 89.00

-

1.693 1.693 2.362 2.362 2.835 43.00 43.00 60.00 60.00 72.00

1.102 (lbs) 1.984 (lbs) 2.205 (lbs) 3.087 (lbs) 3.969 (lbs)

E

1.968

- - -

-

0.50 (kg) 0.90 (kg) 1.00 (kg) 1.40 (kg) 1.80 (kg)

F

50.00

- - -

G

*X 1 Clamping nut with ball-bearing.

X 1

L 1

H

D 2 D 1

D 5 D

I

Collet Chucks ISO 15488 (DIN 6499) | Diameter Range: 0.039" - 1.023" (1.00 mm - 26.00 mm) MVS ConnecƟon Clamping Range Collet Chuck

J

D 2 | D 1 32 - 18 40 - 22 50 - 28 50 - 28 63 - 36 63 - 36 32 - 18 40 - 22 50 - 28 50 - 28 63 - 36 63 - 36

D

X 1 *

L 1

D 5

Nominal Size

Weight

Part No. 228020 228021 228003 228004 228007 228006 228020 228021 228003 228004 228007 228006

0.039 - 0.393 0.078 - 0.629 0.078 - 0.629 0.078 - 0.787 0.078 - 0.787 0.157 - 1.023 1.00 - 10.00 2.00 - 16.00 2.00 - 16.00 2.00 - 20.00 2.00 - 20.00 4.00 - 26.00

ER 16 ER 25 ER 25 ER 32 ER 32 ER 40 ER 16 ER 25 ER 25 ER 32 ER 32 ER 40

2.125 2.953 2.953 2.992 2.992 3.465 54.00 75.00 75.00 76.00 76.00 88.00

1.614

1.102 1.654 1.654 1.969 1.969 2.480 28.00 42.00 42.00 50.00 50.00 63.00

0.441 (lbs) 1.323 (lbs) 1.764 (lbs) 1.764 (lbs) 2.646 (lbs) 2.646 (lbs)

-

2.441

K

-

2.480

-

4100

0.20 (kg) 0.60 (kg) 0.80 (kg) 0.80 (kg) 1.20 (kg) 1.20 (kg)

L

-

62.00

-

63.00

-

M

*X 1 Clamping nut with sliding ring.

B10-M: 12-19

B10: vi-vii

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

INDEX

B10-I: 4

www.alliedmachine.com | 1.330.343.4283

BORING | Modular Tool Holders

Milling Machine Arbors For Milling CuƩers with Longitudinal or Transverse Drive | Shell Mill Adapter Range: 0.512" - 1.575" (13.00 mm - 40.00 mm) X 1

A

X 2

B

D 2 D 1

D 5 D 6

C

L 1

L 2

D

MVS ConnecƟon

Adapter Range

Milling Arbor

D 2 | D 1 50 - 28 50 - 28 50 - 28 63 - 36 63 - 36 63 - 36 63 - 36 80 - 36 50 - 28 50 - 28 50 - 28 63 - 36 63 - 36 63 - 36 63 - 36 80 - 36

D 5

X 1

X 2

L 1

L 2

D 6

Weight

Part No. 162002 162003 162004 161002 161003 161004 161005 161006 162002 162003 162004 161002 161003 161004 161005 161006

0.512 0.630 0.866 0.630 0.866 1.063 1.260 1.575 13.00 16.00 22.00 16.00 22.00 27.00 32.00 40.00

1.339 1.575 1.575 1.575 1.575 1.575 1.575 2.087 34.00 40.00 40.00 40.00 40.00 40.00 40.00 53.00

0.945 1.181 1.102 1.181 1.102 1.102 1.024 1.535 24.00 30.00 28.00 30.00 28.00 28.00 26.00 39.00

0.433 0.669 0.591 0.669 0.591 0.591 0.512 11.00 17.00 15.00 17.00 15.00 15.00 13.00 -

0.866 1.063 1.220 1.063 1.220 1.299 1.496 1.614 22.00 27.00 31.00 27.00 31.00 33.00 38.00 41.00

1.102 1.260 1.575 1.260 1.575 1.890 2.283 28.00 32.00 40.00 32.00 40.00 48.00 58.00 2.756* 70.00*

0.882 (lbs) 1.102 (lbs) 1.323 (lbs) 1.764 (lbs) 1.984 (lbs) 2.425 (lbs) 2.866 (lbs) 5.733 (lbs)

E

F

0.40 (kg) 0.50 (kg) 0.60 (kg) 0.80 (kg) 0.90 (kg) 1.10 (kg) 1.30 (kg) 2.60 (kg)

G

-

H

*Ø 2.756" (70.00 mm) with clutch drive ring.

I

J

K

L

M

B10-M: 12-19

B10: vi-vii

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-I: 5

BORING | Modular Tool Holders

Holding Arbors for Milling CuƩers Central Coolant Feed | Shell Mill Adapter Range: 0.630" - 1.575" (16.00 mm - 40.00 mm)

A

X 1

D 4

L 1

B

D 2 D 1

D 5 D 6

C

D

MVS ConnecƟon

Adapter Range

Holding Arbor

D 2 | D 1 50 - 28 50 - 28 63 - 36 80 - 36 80 - 36 50 - 28 50 - 28 63 - 36 80 - 36 80 - 36

D 5

X 1

L 1

D 4

D 6

Weight

Part No. 162032 162033 161082 209080 209081 162032 162033 161082 209080 209081

0.630 0.866 1.063 1.260 1.575 16.00 22.00 27.00 32.00 40.00

0.630 0.630 0.630 0.630 0.748 16.00 16.00 16.00 16.00 19.00

0.669 0.748 0.827 0.945 1.063 17.00 19.00 21.00 24.00 27.00

- - - - - - - -

1.575 1.969 2.362 3.071 3.504 40.00 50.00 60.00 78.00 89.00

0.882 (lbs) 1.102 (lbs) 1.764 (lbs) 2.425 (lbs) 3.307 (lbs)

E

2.626

0.40 (kg) 0.50 (kg) 0.80 (kg) 1.10 (kg) 1.50 (kg)

F

66.70

NOTE: See page B10-G: 15 for holding arbor with MVS 100 - 56 connecƟon .

G

H

I

J

K

L

M

B10-M: 12-19

B10: vi-vii

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

INDEX

B10-I: 6

www.alliedmachine.com | 1.330.343.4283

BORING | Modular Tool Holders

Clamping Chucks | Tapping Chucks Clamping Range: 0.787" (20.00 mm)

A

S 2

X 1

Locking

L 1

B

D 5 D 3

D 2 D 1

C

10 mm

S 1 Adjustment

L 2

Coolant-Through Hydraulic Clamping Chucks MVS ConnecƟon Clamping Range

D

Clamping Chuck

D 2 | D 1 50 - 28 63 - 36 50 - 28 63 - 36

D 3

X 1

D 5

L 1

L 2

S 1 s6 s5 s6 s5

S 2 s5 s5 s5 s5

Weight

Part No. 209044 209045 209044 209045

0.787 0.787 20.00 20.00

2.953 2.953 75.00 75.00

1.654 1.654 42.00 42.00

2.283 2.087 58.00 53.00

2.008 2.008 51.00 51.00

1.764 (lbs) 2.425 (lbs)

E

0.80 (kg) 1.10 (kg)

NOTE: Balanced 10 gmm/kg.

F

X 1

L 1

G

D 2 D 1

D 5 D 6

H

I

Tapping Chucks (Non-Coolant) MVS ConnecƟon

Quick Change Adapters

Tapping Chucks

Length CompensaƟon

D 2 | D 1 50 - 28 50 - 28 63 - 36 63 - 36 63 - 36 50 - 28 50 - 28 63 - 36 63 - 36 63 - 36

X 1

L 1

D 5

D 6

For Taps

Nominal Size

Pressure Tension Weight

Part No. 209098 209099 231005 231006 231007 209098 209099 231005 231006 231007

M 3 - M 12 M 6 - M 20 M 3 - M 12 M 6 - M 20 M 14 - M 33 M 3 - M 12 M 6 - M 20 M 3 - M 12 M 6 - M 20 M 14 - M 33

1 2 1 2 3 1 2 1 2 3

2.441 1.929 0.748 1.634 0.295

0.295 1.543 (lbs) 0.394 2.425 (lbs) 0.295 1.764 (lbs) 0.394 2.866 (lbs) 0.689 9.040 (lbs)

J

3.701

- 1.220 2.374 0.394

2.205 1.693 0.748 1.634 0.295 3.150 2.638 1.220 2.374 0.394

5.984

- 1.890 3.386 0.689

K

62.00 49.00 19.00 41.50

7.50

7.50

0.70 (kg)

94.00

- 31.00 60.30 10.00

10.00 1.10 (kg)

56.00 43.00 19.00 41.50

7.50

7.50

0.80 (kg)

80.00 67.00 31.00 60.30 10.00

10.00 1.30 (kg) 17.50 4.10 (kg)

152.00

- 48.00 86.00 17.50

L

M

B10-M: 12-19

B10: vi-vii

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-I: 7

BORING | Modular Tool Holders

Boring Bar Blanks

A

L 1

B

D 2 D 1

C

NOTE: The blanks are unhardened and unground in areas marked.

D

MVS ConnecƟon

Boring Bar Blanks

D 2 | D 1 50 - 28 63 - 36 80 - 36 50 - 28 63 - 36 80 - 36

L 1

Weight

Part No. 166103 166104 166105 166103 166104 166105

6.299 6.299 6.299

5.733 (lbs) 9.261 (lbs) 14.550 (lbs)

E

160.00 160.00 160.00

2.60 (kg) 4.20 (kg) 6.60 (kg)

F

G

H

I

J

K

L

M

B10-M: 12-19

B10: vi-vii

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

INDEX

B10-I: 8

www.alliedmachine.com | 1.330.343.4283

BORING | Modular Tool Holders

Accessories for Adapter Sleeves

A

1

2

1

B

C

DIN 1835B

Similar to DIN 1835E*

D

1 Thread Pin

2 Ball Pressure Screw

Clamping Diameter

Part No. 115680 115681 115682 115683 115683 115684 115684 115685 115686 115687 115687 115680 115681 115682 115683 115683 115684 115684 115685 115686 115687 115687

Service Key

Part No. 315788 315789 515535 315790 315790 515675 515675 515676 515677 515678 515678 315788 315789 515535 315790 315790 515675 515675 515676 515677 515678 515678

Service Key

Thread M6 x 1

0.236 0.315 0.394 0.472 0.551 0.630 0.709 0.787 0.984 1.260 1.575 10.00 12.00 14.00 16.00 18.00 20.00 25.00 32.00 40.00 6.00 8.00

s3 / B s4 / B s5 / B s6 / B s6 / B s6 / B s6 / B s8 / B s3 / B s4 / B s5 / B s6 / B s6 / B s6 / B s6 / B s8 / B s10 / B s10 / B s10 / B s10 / B s10 / B s10 / B

s3 / B s4 / B s5 / B s6 / B s6 / B s6 / B s6 / B s8 / B s3 / B s4 / B s5 / B s6 / B s6 / B s6 / B s6 / B s8 / B s10 / B s10 / B s10 / B s10 / B s10 / B s10 / B

M8 x 1.25 M10 x 1.5 M12 x 1.75 M12 x 1.75

E

M14 x 2 M14 x 2 M16 x 2

F

M18 x 2 (2x) M20 x 2 (2x) M20 x 2 (2x)

M6 x 1

G

M8 x 1.25 M10 x 1.5 M12 x 1.75 M12 x 1.75

M14 x 2 M14 x 2 M16 x 2

H

M18 x 2 (2x) M20 x 2 (2x) M20 x 2 (2x)

I

*Without axial adjustment.

J

K

L

M

B10-M: 12-19

B10: vi-vii

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-I: 9

BORING | Modular Tool Holders

Accessories for Adapter Sleeves Adapter Sleeve for Tap Shanks Suitable for ReducƟon Sleeves with Shanks to DIN 1835-B

A

D 2

B

Square Shank

D 1h6

C

Adapter Sleeves

D 1h6

D 2 x Square Shank

Part No. 271190 271191 271192 271193 271194 271195 271196 271197 271198 271199 271200 271201 271202 271203 271204 271205 271206 271207 271208 271209 271210 271211 271190 271191 271192 271193 271194 271195 271196 271197 271198 271199 271200 271201 271202 271203 271204 271205 271206 271207 271208 271209 271210 271211

0.315 0.315 0.394 0.394 0.394 0.472 0.551 0.551 0.630 0.630 0.709 0.787 0.984 0.984 1.260 1.260 1.260 1.575 1.575 1.969 1.969 1.969 10.00 10.00 10.00 12.00 14.00 14.00 16.00 16.00 18.00 20.00 25.00 25.00 32.00 32.00 32.00 40.00 40.00 50.00 50.00 50.00 8.00 8.00

0.082 x 0.098 0.082 x 0.110 0.106 x 0.137 0.118 x 0.157 0.133 x 0.177 0.192 x 0.236 0.216 x 0.275 0.244 x 0.314 0.275 x 0.354 0.314 x 0.393 0.354 x 0.433 0.354 x 0.472 0.433 x 0.551 0.472 x 0.629 0.570 x 0.708 0.629 x 0.787 0.708 x 0.866 0.866 x 0.984 0.866 x 1.102 0.944 x 1.259 1.141 x 1.417 1.259 x 1.574 2.10 x 2.50 2.10 x 2.80 2.70 x 3.50 3.00 x 4.00 3.40 x 4.50 4.90 x 6.00 5.50 x 7.00 6.20 x 8.00 7.00 x 9.00 8.00 x 10.00 9.00 x 11.00 9.00 x 12.00 11.00 x 14.00 12.00 x 16.00 14.50 x 18.00 16.00 x 20.00 18.00 x 22.00 20.00 x 25.00 22.00 x 28.00 24.00 x 32.00 29.00 x 36.00 32.00 x 40.00

D

E

F

G

H

I

J

K

L

M

B10-M: 12-19

B10: vi-vii

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

INDEX

B10-I: 10

www.alliedmachine.com | 1.330.343.4283

BORING | Modular Tool Holders

Accessories for Adapter Sleeves Micro Clamping Chucks Suitable for ReducƟon Sleeves with Shanks to DIN 1835-B

A

L 1

B

L 2

D 3

D 2H5

D 1h6

C

1

D

Micro Clamping Chuck

1 Clamping Wedge

D 1h6

D 2H5

D 3

L 1

L 2

Part No. 219170 219171 219172 219173 219174 219174 219174 219175 219170 219171 219172 219173 219174 219174 219174 219175

Part No. 219070 219071 219072 219073 219074 219075 219076 219077 219070 219071 219072 219073 219074 219075 219076

0.630 0.630 0.787 0.984 0.984 1.260 1.260 1.260 16.00 16.00 20.00 25.00 25.00 32.00 32.00 32.00

0.236 0.315 0.394 0.472 0.551 0.630 0.709 0.787 10.00 12.00 14.00 16.00 18.00 20.00 6.00 8.00

0.472 0.551 0.669 0.787 0.866 0.984 1.063 1.181 12.00 14.00 17.00 20.00 22.00 25.00 27.00 30.00

3.937 3.937 3.937 4.331 4.331 4.921 5.118 5.118

1.575 1.772 1.693 1.535 1.811 1.772 2.126 2.441 40.00 45.00 43.00 39.00 46.00 45.00 54.00 62.00

E

F

100.00 100.00 100.00 110.00 110.00 125.00 130.00 130.00

G

219077 NOTE : Clamping chucks are used in reducƟon sleeves for clamping tools with cylindrical shanks to DIN 1835-B (Fig. 1). The chucks' design allows the use of standard tools versus ordering special tools (Fig. 2).

H

I

J

Figure 1

Figure 2

K

L

M

B10-M: 12-19

B10: vi-vii

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-I: 11

BORING | Modular Tool Holders

Accessories for Drill Chucks

A

B

Service Keys for Drill Chucks Service Key

Tightening Torque Nm

C

Service Key

Type

Part No. 415577 115578

2.50 6.00

B B

15 15

D

E

F

Gaskets for Drill Chucks

Gasket

Gasket Diameter

Clamping Diameter

Part No. 387113 387114 387115 387116 387113 387114 387115 387116

G

0.118 - 0.236 0.236 - 0.511 0.118 - 0.236 0.236 - 0.629 3.00 - 6.00 6.00 - 13.00 3.00 - 6.00 6.00 - 16.00

0.019 - 0.511 0.019 - 0.511 0.098 - 0.629 0.098 - 0.629 0.50 - 13.00 0.50 - 13.00 2.50 - 16.00 2.50 - 16.00

H

I

J

Assembly Tool for Gasket

Part No. 387112

K

L

M

B10-M: 12-19

B10: vi-vii

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

INDEX

B10-I: 12

www.alliedmachine.com | 1.330.343.4283

BORING | Modular Tool Holders

Collet Chucks for Erickson System | Cylindrical Collet Chucks for ISO 15488 (DIN 6499) Collets Diameter Range: 0.039" - 0.393" (1.00 mm - 10.00 mm)

A

L 2

L 3

B

D 3

D 2 D

C

S

L 4

L 1

Collet Chucks for Erickson System

D

Clamping Range

Collet Chuck

Service Key

Nominal Size

D

D 2

D 3

L 1

L 2

L 3

L 4 Min

L 4 Max

S

Weight

Part No. 162080 162081 162082 162083 162080 162081 162082 162083

6 6

0.020 - 0.236 0.551 0.492 4.291 2.992 1.299 1.496 3.937 0.020 - 0.236 0.551 0.492 6.811 5.512 1.299 1.496 6.378

13 13 19 19 13 13 19 19

0.441 (lbs) 0.441 (lbs) 0.661 (lbs) 0.661 (lbs)

E

10 10

0.020 - 0.394 0.827 0.787

4606

2.992 1.614 1.575 4.055

0.020 - 0.394 0.827 0.787 7.126 5.512 1.614 1.575 6.575

6 6

0.50 - 6.00 0.50 - 6.00 0.50 - 10.00 0.50 - 10.00

14.00 12.50 109.00 76.00 33.00 38.00 100.00 14.00 12.50 173.00 140.00 33.00 38.00 162.00 21.00 20.00 117.00 76.00 41.00 40.00 103.00 21.00 20.00 181.00 140.00 41.00 40.00 167.00

0.20 (kg) 0.20 (kg) 0.30 (kg) 0.30 (kg)

F

10 10

L 2

L 3

G

D 2 D

D 3

H

SW

L 4

L 1

I

Cylindrical Collet Chucks for ISO 15488 (DIN 6499) Collets

Collet Chuck

Hex Size

Nominal Size

D

D 2

D 3

L 1

L 2

L 3

L 4 Min 1.437 1.437 0.906 0.906 1.299 1.299 36.50 36.50 23.00 23.00 33.00 33.00

L 4 Max 1.437 1.437 2.559 2.559 4.016 4.843 36.50 36.50 65.00 65.00 102.00 123.00

SW

Part No. 209054 209055 209056 209057 209058 209059 209054 209055 209056 209057 209058 209059

ER 8 ER 8

0.039 - 0.196 0.472 0.039 - 0.196 0.472

0.315 0.472 0.630 0.630 0.787 0.787 12.00 16.00 16.00 20.00 20.00 8.00

4.961 6.535 4.193 6.555 4.665 7.028

3.937 5.512 3.150 5.512 3.150 5.512

1.024 1.024 1.043 1.043 1.516 1.516 26.00 26.00 26.50 26.50 38.50 38.50

09 09 11 11 17 17 09 09 11 11 17 17

J

ER 11 0.039 - 0.275 0.630 ER 11 0.039 - 0.275 0.630 ER 16 0.039 - 0.393 0.866 ER 16 0.039 - 0.393 0.866

K

ER 8 ER 8

1.00 - 5.00 1.00 - 5.00 1.00 - 7.00 1.00 - 7.00 1.00 - 10.00 1.00 - 10.00

12.00 12.00 16.00 16.00 22.00 22.00

126.00 166.00 106.50 166.50 118.50 178.50

100.00 140.00

ER 11 ER 11 ER 16 ER 16

80.00

140.00

L

80.00

140.00

M

B10-M: 12-19

B10: vi-vii

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-I: 13

BORING | Modular Tool Holders

Accessories for Collet Chucks Diameter Range: 0.019" - 0.393" (0.50 mm - 10.00 mm)

A

B

D 1

D

D 2

C

L 1

Collet Sets for Erickson System

D

Set

D 1

D 2

L 1

D

Nominal Size

Standard-No.

Part No. 071016 071017 071016 071017

6

416 E 417 E 416 E 417 E

0.374 0.531

0.300 0.450

1.004 1.197 25.50 30.40

0.020 - 0.236 0.020 - 0.394 0.50 - 6.00 0.50 - 10.00

E

10

6

9.50

7.62

10

13.50

11.43

F

Collets for Erickson System Collet

Collets for Erickson System Collet

Diameter Range

Diameter Range

D

D

Nominal Size

Part No. 071355 071356 071357 071358 071359 071360 071361 071362 071363 071364 071365 071368 071369 071370 071371 071372 071373 071374 071375 071376 071377 071378 071379 071380 071381 071382 071383 071384 071385 071681

Nominal Size

Part No. 071355 071356 071357 071358 071359 071360 071361 071362 071363 071364 071365 071368 071369 071370 071371 071372 071373 071374 071375 071376 071377 071378 071379 071380 071381 071382 071383 071384 071385 071681

G

6 6 6 6 6 6 6 6 6 6 6

0.020 - 0.039 0.039 - 0.059 0.059 - 0.079 0.079 - 0.098 0.098 - 0.118 0.118 - 0.138 0.138 - 0.157 0.157 - 0.177 0.177 - 0.197 0.197 - 0.217 0.217 - 0.236 0.020 - 0.039 0.039 - 0.059 0.059 - 0.079 0.079 - 0.098 0.098 - 0.118 0.118 - 0.138 0.139 - 0.157 0.157 - 0.177 0.177 - 0.197 0.197 - 0.217 0.217 - 0.236 0.236 - 0.256 0.256 - 0.276 0.276 - 0.295 0.295 - 0.315 0.315 - 0.335 0.335 - 0.354 0.354 - 0.374 0.374 - 0.394

6 6 6 6 6 6 6 6 6 6 6

0.50 - 1.00 1.00 - 1.50 1.50 - 2.00 2.00 - 2.50 2.50 - 3.00 3.00 - 3.50 3.50 - 4.00 4.00 - 4.50 4.50 - 5.00 5.00 - 5.50 5.50 - 6.00 0.50 - 1.00 1.00 - 1.50 1.50 - 2.00 2.00 - 2.50 2.50 - 3.00 3.00 - 3.50 3.50 - 4.00 4.00 - 4.50 4.50 - 5.00 5.00 - 5.50 5.50 - 6.00 6.00 - 6.50 6.50 - 7.00 7.00 - 7.50 7.50 - 8.00 8.00 - 8.50 8.50 - 9.00 9.00 - 9.50 9.50 - 10.00

H

I

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

J

K

L

M

B10-M: 12-19

B10: vi-vii

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

INDEX

B10-I: 14

www.alliedmachine.com | 1.330.343.4283

BORING | Modular Tool Holders

Accessories for Collet Chucks ISO 10897-A (DIN 6388-A)

A

L 1

B

D 2

D 1

C

Collet Sets

D

Set

D 2

L 1

D 1

Nominal Size

Standard-No.

Part No. 071003 071004 071019 071003 071004 071019

A 16 A 25 A 32 A 16 A 25 A 32

410 E 444 E 450 E 410 E 444 E 450 E

0.891 1.295 1.625 22.65 32.90 41.30

1.574 2.047 2.362 40.00 52.00 60.00

0.079 - 0.630 0.079 - 0.984 0.157 - 1.259 2.00 - 16.00 2.00 - 25.00 4.00 - 32.00

E

F

Collets

Collets

Diameter

Diameter

G

D 1

D 1

Nominal Size

Part No. 071140 071141 071142 071143 071144 071145 071146 071147 071148 071149 071150 071151 071152 071153 071154 071155 071156 071157 071158 071159 071160 071161 071162 071163 071164 071165 071166 071167 071168

Nominal Size

Part No. 071140 071141 071142 071143 071144 071145 071146 071147 071148 071149 071150 071151 071152 071153 071154 071155 071156 071157 071158 071159 071160 071161 071162 071163 071164 071165 071166 071167 071168

A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16

0.079 0.098 0.118 0.138 0.157 0.177 0.197 0.217 0.236 0.256 0.276 0.295 0.315 0.335 0.354 0.374 0.394 0.413 0.433 0.453 0.472 0.492 0.512 0.531 0.551 0.571 0.591 0.610 0.630

A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16

2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00 8.50 9.00 9.50

H

I

J

10.00 10.50 11.00 11.50 12.00 12.50 13.00 13.50 14.00 14.50 15.00 15.50 16.00

K

L

M

B10-M: 12-19

B10: vi-vii

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-I: 15

BORING | Modular Tool Holders

Accessories for Collet Chucks ISO 10897-A (DIN 6388-A)

A

B

D 1

Collets

Collets

C

Diameter

Diameter

D 1

D 1

Nominal Size

Part No. 071169 071170 071171 071172 071173 071174 071175 071176 071177 071178 071179 071180 071181 071182 071183 071184 071185 071186 071187 071188 071189 071190 071191 071192 071612 071419 071420 071613 071421 071614 071422 071666 071423 071667 071668 071669 071424 071670 071665 071671 071416 071672 071673 071674 071675 071417 071676 071677 071678 071679 071633 071680 071418

Nominal Size

Part No. 071169 071170 071171 071172 071173 071174 071175 071176 071177 071178 071179 071180 071181 071182 071183 071184 071185 071186 071187 071188 071189 071190 071191 071192 071612 071419 071420 071613 071421 071614 071422 071666 071423 071667 071668 071669 071424 071670 071665 071671 071416 071672 071673 071674 071675 071417 071676 071677 071678 071679 071633 071680 071418

A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32

0.078 0.118 0.157 0.196 0.236 0.275 0.315 0.354 0.393 0.433 0.472 0.511 0.551 0.590 0.629 0.669 0.708 0.748 0.787 0.826 0.866 0.905 0.944 0.984 0.157 0.196 0.236 0.275 0.315 0.354 0.393 0.433 0.472 0.511 0.551 0.590 0.629 0.669 0.708 0.748 0.787 0.826 0.866 0.905 0.944 0.984 1.023 1.063 1.102 1.141 1.181 1.220 1.259

A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32

2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00

D

E

10.00 11.00 12.00 13.00 14.00 15.00 16.00 17.00 18.00 19.00 20.00 21.00 22.00 23.00 24.00 25.00 10.00 11.00 12.00 13.00 14.00 15.00 16.00 17.00 18.00 19.00 20.00 21.00 22.00 23.00 24.00 25.00 26.00 27.00 28.00 29.00 30.00 31.00 32.00 4.00 5.00 6.00 7.00 8.00 9.00

F

G

H

I

J

K

L

M

INDEX

B10-I: 16

www.alliedmachine.com | 1.330.343.4283

BORING | Modular Tool Holders

Accessories for Collet Chucks ISO 10897-B (DIN 6388-B)

A

L 1

B

D 2

D 1

C

Collet Sets

D

Set

D 2

L 1

D 1

Nominal Size

Standard-No.

Part No. 071005 071006 071022 071005 071006 071022

B 16 B 25 B 32 B 16 B 25 B 32

415 E 462 E 467 E 415 E 462 E 467 E

0.892 1.295 1.626 22.65 32.90 41.30

1.575 2.047 2.362 40.00 52.00 60.00

0.059 - 0.630 0.138 - 0.984 0.217 - 1.260 1.50 - 16.00 3.50 - 25.00 5.50 - 32.00

E

F

Collets

Collets

Diameter

Diameter

G

D 1

D 1

Nominal Size

Part No. 071625 071626 071621 071622 071193 071194 071195 071196 071197 071198 071199 071200 071201 071202 071203 071204 071205 071206 071207 071208 071209 071210 071211 071212 071213 071214 071215 071216 071217

Nominal Size

Part No. 071625 071626 071621 071622 071193 071194 071195 071196 071197 071198 071199 071200 071201 071202 071203 071204 071205 071206 071207 071208 071209 071210 071211 071212 071213 071214 071215 071216 071217

B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16

0.059 - 0.079 0.079 - 0.098 0.098 - 0.118 0.118 - 0.138 0.138 - 0.157 0.157 - 0.177 0.177 - 0.197 0.197 - 0.217 0.217 - 0.236 0.236 - 0.256 0.256 - 0.276 0.276 - 0.295 0.295 - 0.315 0.315 - 0.335 0.335 - 0.354 0.354 - 0.374 0.374 - 0.394 0.394 - 0.413 0.413 - 0.433 0.433 - 0.453 0.453 - 0.472 0.472 - 0.492 0.492 - 0.512 0.512 - 0.531 0.531 - 0.551 0.551 - 0.571 0.571 - 0.591 0.591 - 0.610 0.610 - 0.630

B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16 B 16

1.50 - 2.00 2.00 - 2.50 2.50 - 3.00 3.00 - 3.50 3.50 - 4.00 4.00 - 4.50 4.50 - 5.00 5.00 - 5.50 5.50 - 6.00 6.00 - 6.50 6.50 - 7.00 7.00 - 7.50 7.50 - 8.00 8.00 - 8.50 8.50 - 9.00 9.00 - 9.50 9.50 - 10.00 10.00 - 10.50 10.50 - 11.00 11.00 - 11.50 11.50 - 12.00 12.00 - 12.50 12.50 - 13.00 13.00 - 13.50 13.50 - 14.00 14.00 - 14.50 14.50 - 15.00 15.00 - 15.50 15.50 - 16.00

H

I

J

K

L

M

B10-M: 12-19

B10: vi-vii

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-I: 17

BORING | Modular Tool Holders

Accessories for Collet Chucks ISO 10897-B (DIN 6388-B)

A

B

D 1

C

Collets

Collets

Diameter

Diameter

D

D 1

D 1

Nominal Size

Part No. 071627 071628 071218 071219 071220 071221 071222 071223 071224 071225 071226 071227 071228 071229 071230 071231 071232 071233 071234 071235 071236 071237 071238 071239 071240 071241 071242 071243 071244 071245 071246 071247 071248 071249 071250 071251 071252 071253 071254 071255 071256 071257 071258

Nominal Size

Part No. 071627 071628 071218 071219 071220 071221 071222 071223 071224 071225 071226 071227 071228 071229 071230 071231 071232 071233 071234 071235 071236 071237 071238 071239 071240 071241 071242 071243 071244 071245 071246 071247 071248 071249 071250 071251 071252 071253 071254 071255 071256 071257 071258

B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25

0.138 - 0.157 0.157 - 0.177 0.177 - 0.197 0.197 - 0.217 0.217 - 0.236 0.236 - 0.256 0.256 - 0.276 0.276 - 0.295 0.295 - 0.315 0.315 - 0.335 0.335 - 0.354 0.354 - 0.374 0.374 - 0.394 0.394 - 0.413 0.413 - 0.433 0.433 - 0.453 0.453 - 0.472 0.472 - 0.492 0.492 - 0.512 0.512 - 0.531 0.531 - 0.551 0.551 - 0.571 0.571 - 0.591 0.591 - 0.610 0.610 - 0.630 0.630 - 0.650 0.650 - 0.669 0.669 - 0.689 0.689 - 0.709 0.709 - 0.728 0.728 - 0.748 0.748 - 0.768 0.768 - 0.787 0.787 - 0.807 0.807 - 0.827 0.827 - 0.846 0.846 - 0.866 0.866 - 0.866 0.866 - 0.906 0.906 - 0.925 0.925 - 0.945 0.945 - 0.965 0.965 - 0.984

B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25

3.50 - 4.00 4.00 - 4.50 4.50 - 5.00 5.00 - 5.50 5.50 - 6.00 6.00 - 6.50 6.50 - 7.00 7.00 - 7.50 7.50 - 8.00 8.00 - 8.50 8.50 - 9.00 9.00 - 9.50 9.50 - 10.00 10.00 - 10.50 10.50 - 11.00 11.00 - 11.50 11.50 - 12.00 12.00 - 12.50 12.50 - 13.00 13.00 - 13.50 13.50 - 14.00 14.00 - 14.50 14.50 - 15.00 15.00 - 15.50 15.50 - 16.00 16.00 - 16.50 16.50 - 17.00 17.00 - 17.50 17.50 - 18.00 18.00 - 18.50 18.50 - 19.00 19.00 - 19.50 19.50 - 20.00 20.00 - 20.50 20.50 - 21.00 21.00 - 21.50 21.50 - 22.00 22.00 - 22.50 22.50 - 23.00 23.00 - 23.50 23.50 - 24.00 24.00 - 24.50 24.50 - 25.00

E

F

G

H

I

J

K

L

M

B10-M: 12-19

B10: vi-vii

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

INDEX

B10-I: 18

www.alliedmachine.com | 1.330.343.4283

BORING | Modular Tool Holders

Accessories for Collet Chucks ISO 10897-B (DIN 6388-B)

A

D 1

B

Collets

Collets

C

Diameter

Diameter

D 1

D 1

Nominal Size

Part No. 071686 071687 071688 071689 071690 071691 071692 071693 071542 071543 071544 071545 071546 071547 071548 071549 071550 071551 071552 071553 071554 071555 071556 071557 071558 071559 071560 071561 071562 071563 071564 071565 071566 071567 071568 071569 071570 071571 071572 071573 071574 071575 071576 071577 071578 071579 071580 071581 071582 071583 071584 071585 071586

Nominal Size

Part No. 071686 071687 071688 071689 071690 071691 071692 071693 071542 071543 071544 071545 071546 071547 071548 071549 071550 071551 071552 071553 071554 071555 071556 071557 071558 071559 071560 071561 071562 071563 071564 071565 071566 071567 071568 071569 071570 071571 071572 071573 071574 071575 071576 071577 071578 071579 071580 071581 071582 071583 071584 071585 071586

B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32

0.217 - 0.236 0.236 - 0.256 0.256 - 0.276 0.276 - 0.295 0.295 - 0.315 0.315 - 0.335 0.335 - 0.354 0.354 - 0.374 0.374 - 0.394 0.394 - 0.413 0.413 - 0.433 0.433 - 0.453 0.453 - 0.472 0.472 - 0.492 0.492 - 0.512 0.512 - 0.531 0.531 - 0.551 0.551 - 0.571 0.571 - 0.591 0.591 - 0.610 0.610 - 0.630 0.630 - 0.650 0.650 - 0.669 0.669 - 0.689 0.689 - 0.709 0.709 - 0.728 0.728 - 0.748 0.748 - 0.768 0.768 - 0.787 0.787 - 0.807 0.807 - 0.827 0.827 - 0.846 0.846 - 0.866 0.866 - 0.866 0.866 - 0.906 0.906 - 0.925 0.925 - 0.945 0.945 - 0.965 0.965 - 0.984 0.984 - 1.004 1.004 - 1.024 1.024 - 1.043 1.043 - 1.063 1.063 - 1.083 1.083 - 1.102 1.102 - 1.122 1.122 - 1.142 1.142 - 1.161 1.161 - 1.181 1.181 - 1.201 1.201 - 1.220 1.220 - 1.240 1.240 - 1.260

B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32

5.50 - 6.00 6.00 - 6.50 6.50 - 7.00 7.00 - 7.50 7.50 - 8.00 8.00 - 8.50 8.50 - 9.00 9.00 - 9.50 9.50 - 10.00 10.00 - 10.50 10.50 - 11.00 11.00 - 11.50 11.50 - 12.00 12.00 - 12.50 12.50 - 13.00 13.00 - 13.50 13.50 - 14.00 14.00 - 14.50 14.50 - 15.00 15.00 - 15.50 15.50 - 16.00 16.00 - 16.50 16.50 - 17.00 17.00 - 17.50 17.50 - 18.00 18.00 - 18.50 18.50 - 19.00 19.00 - 19.50 19.50 - 20.00 20.00 - 20.50 20.50 - 21.00 21.00 - 21.50 21.50 - 22.00 22.00 - 22.50 22.50 - 23.00 23.00 - 23.50 23.50 - 24.00 24.00 - 24.50 24.50 - 25.00 25.00 - 25.50 25.50 - 26.00 26.00 - 26.50 26.50 - 27.00 27.00 - 27.50 27.50 - 28.00 28.00 - 28.50 28.50 - 29.00 29.00 - 29.50 29.50 - 30.00 30.00 - 30.50 30.50 - 31.00 31.00 - 31.50 31.50 - 32.00

D

E

F

G

H

I

J

K

L

M

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-I: 19

BORING | Modular Tool Holders

Accessories for Collet Chucks ISO 10897-A (DIN 6388-A)

A

L 1

B

D 2

D 1

C

Collet Sets for Clarkson System

D

Sets

D 2

L 1

D 1

Nominal Size

Standard-No.

Part No. 071013 071014 071020 071013 071014 071020

A 16 A 25 A 32 A 16 A 25 A 32

421 E 459 E 460 E 421 E 459 E 460 E

0.892 1.295 1.626 22.65 32.90 41.30

1.654 2.047 2.480 42.00 52.00 63.00

0.236 - 0.472 0.236 - 0.984 0.236 - 1.260 6.00 - 12.00 6.00 - 25.00 6.00 - 32.00

E

F

NOTE : Recommended to use clamping nuts with ball bearings to lock collets.

Collets for Clarkson System

Collets for Clarkson System

G

Diameter

Diameter

D 1

D 1

Nominal Size

Part No. 071304 071305 071306 071307 071308 071309 071310 071311 071312 071313 071684 071427 071428 071429 071430 071431 071432 071433 071685

Nominal Size

Part No. 071304 071305 071306 071307 071308 071309 071310 071311 071312 071313 071684 071427 071428 071429 071430 071431 071432 071433 071685

A 16 A 16 A 16 A 16 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32

0.236 0.315 0.394 0.472 0.236 0.315 0.394 0.472 0.630 0.787 0.984 0.236 0.315 0.394 0.472 0.630 0.787 0.984 1.260

A 16 A 16 A 16 A 16 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32

6.00 8.00

H

10.00 12.00

6.00 8.00

I

10.00 12.00 16.00 20.00 25.00 10.00 12.00 16.00 20.00 25.00 32.00 6.00 8.00

J

K

L

M

B10-M: 12-19

B10: vi-vii

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

INDEX

B10-I: 20

www.alliedmachine.com | 1.330.343.4283

BORING | Modular Tool Holders

Accessories for Collet Chucks ISO 15488-B (DIN 6499-B)

A

L

1

B

D 2

D 1

C

Collet Sets

D

Diameter

Collet Set

D 1

D 2

L 1

Nominal Size

Standard-No.

Part No. 071034 071028 071029 071031 071032 071033 071034 071028 071029 071031 071032 071033

ER 8

4004 E 4008 E

0.039 - 0.197 0.039 - 0.276 0.020 - 0.394 0.059 - 0.630 0.079 - 0.787 0.118 - 1.024 1.00 - 5.00 1.00 - 7.00 0.50 - 10.00 1.50 - 16.00 2.00 - 20.00 3.00 - 26.00

0.335 0.433 0.630 0.984 1.260 1.575 11.00 16.00 25.00 32.00 40.00 8.50

0.531 0.709 1.083 1.339 1.575 1.811 13.50 18.00 27.50 34.00 40.00 46.00

E

ER 11 ER 16 ER 25 ER 32 ER 40 ER 11 ER 16 ER 25 ER 32 ER 40 ER 8

426 E 430 E 470 E 472 E

F

4004 E 4008 E

426 E 430 E 470 E 472 E

G

Collets

Collets

H

Diameter

Diameter

D 1

D 1

Nominal Size

Part No. 071986 071987 071988 071989 071990 071991 071992 071993 071994 071700 071701 071702 071703 071704 071705 071706 071707 071708 071709 071710 071711 071712

Nominal Size

Part No. 071986 071987 071988 071989 071990 071991 071992 071993 071994 071700 071701 071702 071703 071704 071705 071706 071707 071708 071709 071710 071711 071712

ER 8 ER 8 ER 8 ER 8 ER 8 ER 8 ER 8 ER 8 ER 8

0.039 0.059 0.079 0.098

ER 8 ER 8 ER 8 ER 8 ER 8 ER 8 ER 8 ER 8 ER 8

1.00 1.50 2.00 2.50

I

0.102 - 0.118 0.122 - 0.138 0.142 - 0.157 0.161 - 0.177 0.181 - 0.197

2.60 - 3.00 3.10 - 3.50 3.60 - 4.00 4.10 - 4.50 4.60 - 5.00

J

ER 11 ER 11 ER 11 ER 11 ER 11 ER 11 ER 11 ER 11 ER 11 ER 11 ER 11 ER 11 ER 11

0.039 0.059 0.079 0.098

ER 11 ER 11 ER 11 ER 11 ER 11 ER 11 ER 11 ER 11 ER 11 ER 11 ER 11 ER 11 ER 11

1.00 1.50 2.00 2.50

K

0.102 - 0.118 0.122 - 0.138 0.142 - 0.157 0.161 - 0.177 0.181 - 0.197 0.201 - 0.217 0.220 - 0.354 0.240 - 0.256 0.260 - 0.276

2.60 - 3.00 3.10 - 3.50 3.60 - 4.00 4.10 - 4.50 4.60 - 5.00 5.10 - 5.50 5.60 - 6.00 6.10 - 6.50 6.60 - 7.00

L

M

B10-M: 12-19

B10: vi-vii

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-I: 21

BORING | Modular Tool Holders

Accessories for Collet Chucks ISO 15488-B (DIN 6499-B)

A

B

D 1

C

Collets

D

Diameter

D 1

Nominal Size

Part No. 071713 071714* 071715 071716* 071717 071718* 071719 271132* 071720 271133* 071721 271134* 071722 271135* 071723 271136* 071724 271137* 071725 071713 071714* 071715 071716* 071717 071718* 071719 271132* 071720 271133* 071721 271134* 071722 271135* 071723 271136* 071724 271137* 071725

ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16

0.020 - 0.039 0.039 - 0.059 0.039 - 0.079 0.079 - 0.098 0.098 - 0.118 0.118 - 0.138 0.138 - 0.157 0.157 - 0.177 0.157 - 0.197 0.197 - 0.217 0.217 - 0.236 0.236 - 0.256 0.236 - 0.276 0.276 - 0.295 0.295 - 0.315 0.315 - 0.335 0.335 - 0.354 0.354 - 0.374 0.354 - 0.394 0.50 - 1.00 1.00 - 1.50 1.00 - 2.00 2.00 - 2.50 2.50 - 3.00 3.00 - 3.50 3.50 - 4.00 4.00 - 4.50 4.00 - 5.00 5.00 - 5.50 5.50 - 6.00 6.00 - 6.50 6.00 - 7.00 7.00 - 7.50 7.50 - 8.00 8.00 - 8.50 8.50 - 9.00 9.00 - 9.50 9.00 - 10.00

E

F

G

H

I

J

K

L

*Items not contained in set.

M

B10-M: 12-19

B10: vi-vii

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

INDEX

B10-I: 22

www.alliedmachine.com | 1.330.343.4283

BORING | Modular Tool Holders

Accessories for Collet Chucks ISO 15488-B (DIN 6499-B)

A

B

D 1

C

Collets

Collets

D

Diameter

Diameter

D 1

D 1

Nominal Size

Part No. 071743 071744* 071745 271128* 071746 271129* 071747 271130* 071748 271131* 071749 071750 071751 071752 071753 071754 071755 071756 071757 071758 071761 071762 071763 071764 071765 071766 071767 071768 071769 071770 071771 071772 071773 071774 071775 071776 071777 071778 071776 071777 071778

Nominal Size

Part No. 071743 071744* 071745 271128* 071746 271129* 071747 271130* 071748 271131* 071749 071750 071751 071752 071753 071754 071755 071756 071757 071758 071761 071762 071763 071764 071765 071766 071767 071768 071769 071770 071771 071772 071773 071774 071775 071776 071777 071778 071776 071777 071778

ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32

0.059 - 0.079 0.079 - 0.098 0.098 - 0.118 0.118 - 0.138 0.138 - 0.157 0.157 - 0.177 0.177 - 0.197 0.197 - 0.217 0.217 - 0.236 0.236 - 0.256 0.256 - 0.276 0.276 - 0.315 0.315 - 0.354 0.354 - 0.394 0.394 - 0.433 0.433 - 0.472 0.472 - 0.512 0.512 - 0.551 0.551 - 0.591 0.591 - 0.630 0.079 - 0.118 0.118 - 0.157 0.157 - 0.197 0.197 - 0.236 0.236 - 0.276 0.276 - 0.315 0.315 - 0.354 0.354 - 0.394 0.394 - 0.433 0.433 - 0.472 0.472 - 0.512 0.512 - 0.551 0.551 - 0.591 0.591 - 0.630 0.630 - 0.669 0.669 - 0.709 0.709 - 0.748 0.748 - 0.787 0.669 - 0.709 0.709 - 0.748 0.748 - 0.787

ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32

1.50 - 2.00 2.00 - 2.50 2.50 - 3.00 3.00 - 3.50 3.50 - 4.00 4.00 - 4.50 4.50 - 5.00 5.00 - 5.50 5.50 - 6.00 6.00 - 6.50 6.50 - 7.00 7.00 - 8.00 8.00 - 9.00 9.00 - 10.00 10.00 - 11.00 11.00 - 12.00 12.00 - 13.00 13.00 - 14.00 14.00 - 15.00 15.00 - 16.00 2.00 - 3.00 3.00 - 4.00 4.00 - 5.00 5.00 - 6.00 6.00 - 7.00 7.00 - 8.00 8.00 - 9.00 9.00 - 10.00 10.00 - 11.00 11.00 - 12.00 12.00 - 13.00 13.00 - 14.00 14.00 - 15.00 15.00 - 16.00 16.00 - 17.00 17.00 - 18.00 18.00 - 19.00 19.00 - 20.00 17.00 - 18.00 18.00 - 19.00 19.00 - 20.00

E

F

G

H

I

J

K

L

M

*Items not contained in set.

*Items not contained in set.

B10-M: 12-19

B10: vi-vii

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-I: 23

Made with FlippingBook HTML5