B10-B_US-EN

Wohlhaupter® Fine Boring Tools

Drilling

Reaming

Burnishing

Threading

Wohlhaupter ® BORING Fine Boring Tools

Specials

S E C T I O N B10-B Fine Boring

Wohlhaupter ® Fine Boring 420 (410) | 465 (464) | 365 (364) | 565 (564) | 320 (310) | 538 (537) Diameter Range: 0.787"- 8.071" (20.00 mm - 205.00 mm)

NOTE : Imperial items pictured NOTE: 3E TECH+ adjustment accuracy of 0.0001" or 0.001 mm on diameter

NOTE: Digital and vernier adjustment accuracy of 0.0001" or 0.002 mm on diameter

Boring has never been more exciting. Wohlhaupter's fine boring systems are offered in both vernier and easy-to-read digital readout boring heads and cassettes. The lightweight Alu-Line serrated tool bodies reduce weight on the machine spindle. Digital 3E TECH+ Boring Heads

Your safety and the safety of others is very important. This catalog contains important safety messages. Always read and follow all safety precautions. This triangle is a safety hazard symbol. It alerts you to potential safety hazards that can cause tool failure and serious injury. When you see this symbol in the catalog, look for a related safety message that may be near this triangle or referred to in the nearby text. There are safety signal words also used in the catalog. Safety messages follow these words. WARNING (shown above) means that failure to follow the precautions in this message could result in tool failure and serious injury. NOTICE means that failure to follow the precautions in this message could result in damage to the tool or machine but not result in personal injury. NOTE and IMPORTANT are also used. These are important that you read and follow but are not safety-related. Visit www.alliedmachine.com for the most up-to-date information and procedures. WARNING

• 420 (410) / 465 (464) Balance fine boring heads • 420 (410) Ø 0.787" - 1.142" (20.00 mm - 29.00 mm) • 465 (464) Ø 1.142" - 8.071" (29.00 mm - 205.00 mm) Balance Analog Boring Heads • 365 (364) / 465 (464) fine boring heads • 365 (364) Ø 0.787" - 1.161" (20.00 mm - 29.50 mm) • 465 (464) Ø 1.142" - 8.071" (29.00 mm - 205.00 mm) Balance Digital Boring Heads • 565 (564) fine boring heads • Ø 1.969" - 8.071" (50.00 mm - 205.00 mm) Analog Boring Heads • 320 (310) fine boring heads • Ø 0.787" - 8.071" (20.00 mm - 205.00 mm) Analog and Digital Cassettes • 538 (537) fine boring cassettes • Ø 3.937" - 8.071" (100.00 mm - 205.00 mm)

Applicable Industries

Aerospace Agriculture

Automotive

Firearms

General Machining

Oil & Gas

Renewable Energy

Reference Icons The following icons will appear throughout the catalog to help you navigate between products.

Fine Boring Table of Contents

420 (410) Digital 3E TECH+ / 465 (464) Balance Digital 3E TECH+

Clamping Elements For use with insert holders and boring heads

Product Overview . . . . . . . . . . . . . . . 2 - 3 420 (410) Boring Heads . . . . . . . . . . . . . . . . . 4 465 (464) Boring Heads . . . . . . . . . . . . . . . 5 - 7

Shanks A variety of shanks for different machines

Insert Holders . . . . . . . . . . . . . . . . . 8 Accessories . . . . . . . . . . . . . . . . . 9

Inserts For use with insert holder boring heads and boring bars using indexable inserts MVS Connection Color Guide Detailed instructions and information regarding the MVS connection(s)

365 (364) Balance Analog/ 465 (464) Balance Analog

Product Overview . . . . . . . . . . . . . . 10 - 11 365 (364) / 465 (464) Boring Heads . . . . . . . . . . . . . . . . 12 465 (464) Boring Heads . . . . . . . . . . . . . . . . 13

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

Insert Holders . . . . . . . . . . . . . . . . 14 Accessories . . . . . . . . . . . . . . . . 15

Recommended Cutting Data Speed and feed recommendations for optimum and safe boring

565 (564) Balance Digital

Product Overview . . . . . . . . . . . . . . 16 - 17 565(564)BoringHeads . . . . . . . . . . . . . .18-19

Coolant-Through Option Indicates that the product is coolant through

Insert Holders . . . . . . . . . . . . . . . . 20 Accessories . . . . . . . . . . . . . . . . 21

320 (310) Analog Product Overview . . . . . . . . . . . . . . 22 - 23 320(310)BoringHeads . . . . . . . . . . . . . .24-25

Insert Holders . . . . . . . . . . . . . . . . 26 Accessories . . . . . . . . . . . . . . . . 27

538 (537) Cassettes Product Overview . . . . . . . . . . . . . . 28 - 29 538 (537) Analog Cassettes . . . . . . . . . . . . . . . . 30 538 (537) 3E TECH+ Digital Cassettes . . . . . . . . . . . . . . . . 31 Serrated Tool Bodies | Insert Holders . . . . . . . . . . . . . . . . 32 3E TECH+ Accessories . . . . . . . . . . . . . . . . 33

Diameter Range

Series

Imperial (inch) 0.787 - 1.142 1.142 - 8.071 0.787 - 1.161 1.969 - 8.071 0.787 - 8.071 3.937 - 8.071

Metric (mm) 20.00 - 29.00 29.00 - 205.00 20.00 - 29.50 50.00 - 205.00 20.00 - 205.00 100.00 - 205.00

420 (410) 465 (464) 365 (364) 565 (564) 320 (310) 538 (537)

B10-B: 1

420 (410) and 465 (464) Balance Product Overview

PrimeBore VERSATILE BORING 420 (410) and 465 (464) Digital 3E TECH+ FINE BORING

Make easy diameter adjustments with our 3E TECH+ digital readout module.

Wohlhaupter® 420 (410) and 465 (464) Balance digital boring heads are equipped with a 3E TECH+ docking port for easy digital adjustments. Boring heads from 1.142" (29.00 mm) and up offer precision boring with automatic balancing. Our boring heads are specifically engineered to minimize the residual imbalance produced by insert holder displacement. Wohlhaupter Alu-Line boring heads, ranging from 2.559" (65.00 mm) and up, offer a lightweight aluminum design with a wear-resistant coating that reduces weight on the spindle up to 50%. The insert holder can also be rotated for reverse machining jobs.

• 420 (410) diameter range: 0.787" - 1.142" (20.00 mm - 29.00 mm) • 465 (464) Balance diameter range: 1.142" - 8.071" (29.00 mm - 205.00 mm) • 465 (464) Balance Alu-Line diameter range: 2.559" - 8.071" (65.00 mm - 205.00 mm) - Special coating on Alu-Line for wear-resistant surface - Alu-Line body reduces tool weight by 50%, reducing stress on the spindle • Coolant through

• 3E TECH+ diameter adjustment of 0.0001" (0.001 mm) • Vernier diameter adjustment of 0.0001" (0.002 mm) • Internal balancing improves tool life and surface finish • Insert holder can be rotated for back boring jobs • Max cutting speed: 5,577 SFM (1,700 m/min)

Highly accurate adjustments through vernier scale

NOTE: 3E TECH+ adjustment accuracy of 0.0001" or 0.001 mm on diameter NOTE: Vernier adjustment accuracy of 0.0001" or 0.002 mm on diameter

Versatile 3E TECH+ digital readout compatible with other boring tools

IMPORTANT: Max spindle speed refers to maximum possible speed for an individual boring head and is not a recommended parameter. Refer to page B10-M: 12 for recommended application-specific parameters. Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

B10-B: 2

WOHLHAUPTER ® 420 (410) and 465 (464) 3E TECH+ DIGITAL BORING HEADS

Wohlhaupter 3E TECH+ Improve productivity and quality with the Wohlhaupter 3E TECH+ external digital readout module. The 3E TECH+ docks onto boring heads and cassettes that offer the 3E TECH+ port to make easy diameter adjustments at the machine. • Make quick and easy micron-accurate diameter adjustments • Backlit OLED digital display shows exact diameter adjustments • 3E TECH+ screen will auto-rotate to match orientation of the display module • Toggle between imperial and metric to accommodate all applications • 3E TECH+ adjustments of 0.0001" (0.001 mm) on diameter • Designed to be removed from boring tool before operation (if forgotten 3E TECH+ module will fall off at 500 RPM) • Water and dust resistent IP 56 • Coolant and chip resistant • 3E TECH+ will automatically turn off after 30 seconds of not using • WEEE-Reg.-Nr. DE 15820388

High-production fine boring

Easy diameter adjustment with 3E TECH+

Self-balancing 465 (464) boring heads

Imperial and metric

420 (410) and 465 (464) BORING HEADS WITH 3E TECH+

Diameter Range 0.787 - 0.965 0.965 - 1.142 1.142 - 1.496 1.496 - 1.969 1.969 - 2.579 2.559 - 3.268 3.228 - 4.055 3.937 - 5.118 4.921 - 6.594 6.398 - 8.071 20.00 - 24.50 24.50 - 29.00 29.00 - 38.00 38.00 - 50.00 50.00 - 65.50 65.00 - 83.00 82.00 - 103.00 100.00 - 130.00 125.00 - 167.50 162.50 - 205.00

Part No. 420001 420002 465003 465004 465005 465006 465007 465008 465009 465010 410001 410002 464003 464004 464005 464006 464007 464008 464009 464010

NOTE: 3E TECH+ adjustment accuracy of 0.0001" or 0.001 mm on diameter NOTE: Vernier adjustment accuracy of 0.0001" or 0.002 mm on diameter

NOTE: Adjustment accuracy of 0.0001" or 0.002mm on diameter IMPORTANT: Max spindle speed refers to maximum possible speed for an individual boring head and is not a recommended parameter. Refer to page B10-M: 12 for recommended application-specific parameters. Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

B10-B: 3

BORING | Fine Boring | 420 (410) Digital 3E TECH+ Boring Head

420 (410) Digital 3E TECH+ Boring Heads Diameter Range: 0.787" - 1.142" (20.00 mm - 29.00 mm)

A

X 1

B

91°

D 5 D 2 D 1

A

C

L 2

420 Digital 3E TECH+ Boring Heads MVS Connection NOTE: Vernier adjustment accuracy of 0.0001" or 0.002 mm on diameter

Form 101

Form 20

D

Boring Range

Boring Head

Part No.

D 2 | D 1 19 - 11 22 - 11 22 - 11

Weight

Insert Form Insert Holder Boring Head

A

X 1

L 2

D 5

364077 210059 210069

420001 420002 420002

0.787 - 0.965 0.965 - 1.142 0.965 - 1.142

1.811 1.811 1.811

1.693 1.713 1.713

-

0.198 (lbs) 0.286 (lbs) 0.286 (lbs)

20*

E

0.906 0.906

20

101

* Not suitable for indexable inserts with a radius of 0.031" (0.80 mm) NOTE : 3E TECH+ module, charging unit, insert holders, and inserts sold separately

F

410 Digital 3E TECH+ Boring Heads MVS Connection

Boring Range

Boring Head

Part No.

G

D 2 | D 1 19 - 11 22 - 11 22 - 11

Weight 0.09 (kg) 0.13 (kg) 0.13 (kg)

Insert Form Insert Holder Boring Head

A

X 1

L 2

D 5

364077 210059 210069

410001 410002 410002

20.00 - 24.50 24.50 - 29.00 24.50 - 29.00

46.00 46.00 46.00

43.00 43.50 43.50

-

20*

23.00 23.00

20

101

H

* Not suitable for indexable inserts with a radius of 0.031" (0.80 mm) NOTE : 3E TECH+ module, charging unit, insert holders, and inserts sold separately

I

J

3E TECH+ Digital Readout Module Part No. 536016 NOTE : WEEE-Reg.-Nr. DE 15820388 *Charging unit sold separately Charging Unit* 536015

K

NOTE: 3E TECH+ adjustment accuracy of 0.0001" or 0.001 mm on diameter

L

B10-M: 12-15

B10-F

B10: vi-vii

Key on B10-B: 1

M

= Imperial (in) = Metric (mm)

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

IMPORTANT: Max spindle speed refers to maximum possible speed for an individual boring head and is not a recommended parameter. Refer to page B10-M: 12 for recommended application-specific parameters. Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-B: 4

www.alliedmachine.com | 1.330.343.4283

BORING | Fine Boring | 465 (464) Balance Digital 3E TECH+ Boring Head

465 (464) Balance Digital 3E TECH+ Boring Heads Diameter Range: 1.142" - 2.579" (29.00 mm - 65.50 mm)

A

X 1

X 1R

B

91°

A

D 1 D 2 D 5

C

L 2

NOTE: Vernier adjustment accuracy of 0.0001" or 0.002 mm on diameter

Form 101

Form 20

465 Balance Digital 3E TECH+ Boring Heads MVS Connection Boring Range

D

Boring Head

Part No.

D 2 | D 1 25 - 14 25 - 14 32 - 18 32 - 18 40 - 22 40 - 22

Weight

Insert Form Insert Holder Boring Head

A

X 1

X 1R

L 2

D 5

210059 210069 264051 264077 210052 210062

465003 465003 465004 465004 465005 465005

1.142 - 1.496 1.142 - 1.496 1.496 - 1.969 1.496 - 1.969 1.969 - 2.579 1.969 - 2.579

2.205 2.205 2.598 2.598 2.953 2.953

- -

2.106 2.106 2.500 2.500 2.854 2.854

1.063 0.463 (lbs) 1.063 0.463 (lbs) 1.339 0.904 (lbs) 1.339 0.904 (lbs) 1.654 1.764 (lbs) 1.654 1.764 (lbs)

20

E

101

1.496 1.496 1.850 1.850

20

101

20

101

F

NOTE : X 1R = rotated insert holder for reverse machining NOTE : 3E TECH+ module, charging unit, insert holders, and inserts sold separately

464 Balance Digital 3E TECH+ Boring Heads MVS Connection Boring Range

Boring Head

Part No.

G

D 2 | D 1 25 - 14 25 - 14 32 - 18 32 - 18 40 - 22 40 - 22

Weight 0.21 (kg) 0.21 (kg) 0.41 (kg) 0.41 (kg) 0.80 (kg) 0.80 (kg)

Insert Form Insert Holder Boring Head

A

X 1

X 1R

L 2

D 5

210059 210069 264051 264077 210052 210062

464003 464003 464004 464004 464005 464005

29.00 - 38.00 29.00 - 38.00 38.00 - 50.00 38.00 - 50.00 50.00 - 65.50 50.00 - 65.50

56.00 56.00 66.00 66.00 75.00 75.00

- -

53.50 53.50 63.50 63.50 72.50 72.50

27.00 27.00 34.00 34.00 42.00 42.00

20

101

38.00 38.00 47.00 47.00

20

H

101

20

101

NOTE : X 1R = rotated insert holder for reverse machining NOTE : 3E TECH+ module, charging unit, insert holders, and inserts sold separately

I

J

3E TECH+ Digital Readout Module Part No. 536016 NOTE : WEEE-Reg.-Nr. DE 15820388 *Charging unit sold separately Charging Unit* 536015

K

NOTE: 3E TECH+ adjustment accuracy of 0.0001" or 0.001 mm on diameter

L

B10-M: 12-15

B10-F

B10: vi-vii

Key on B10-B: 1

M

= Imperial (in) = Metric (mm)

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

IMPORTANT: Max spindle speed refers to maximum possible speed for an individual boring head and is not a recommended parameter. Refer to page B10-M: 12 for recommended application-specific parameters. Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-B: 5

BORING | Fine Boring | 465 (464) Balance Digital 3E TECH+ Boring Head

465 Balance Digital 3E TECH+ Boring Heads Imperial | Alu-Line | Diameter Range: 2.559" - 8.071"

A

X 1

X 1R

B

91°

D 2 D 5

D 1

D 1

A

D 2

C

L 2

NOTE: Vernier adjustment accuracy of 0.0001" or 0.002 mm on diameter

Form 101

Form 20

465 Balance Digital 3E TECH+ Alu-Line Boring Heads MVS Connection Boring Range

D

Boring Head

Part No.

D 2 | D 1 50 - 28 50 - 28 50 - 28 63 - 36 63 - 36 63 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36

Weight

Insert Form Insert Holder Boring Head

A

X 1

X 1R

L 2

D 5

210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064

465006 465006 465006 465007 465007 465007 465008 465008 465008 465009 465009 465009 465010 465010 465010

2.559 - 3.268 2.559 - 3.268 2.559 - 3.268 3.228 - 4.055 3.228 - 4.055 3.228 - 4.055 3.937 - 5.118 3.937 - 5.118 3.937 - 5.118 4.921 - 6.594 4.921 - 6.594 4.921 - 6.594 6.398 - 8.071 6.398 - 8.071 6.398 - 8.071

2.953 2.953 2.953 3.543 3.543 3.543 3.543 3.543 3.543 3.543 3.543 3.543 3.543 3.543 3.543

1.535 1.535 1.535 2.126 2.126 2.126 2.126 2.126 2.126 2.126 2.126 2.126 2.126 2.126 2.126

2.874 2.874 2.874 3.464 3.464 3.464 3.464 3.464 3.464 3.464 3.464 3.464 3.464 3.464 3.464

- 1.323 (lbs) - 1.323 (lbs) - 1.323 (lbs) - 2.205 (lbs) - 2.205 (lbs) - 2.205 (lbs) - 3.307 (lbs) - 3.307 (lbs) - 3.307 (lbs) 3.937 3.307 (lbs) 3.937 4.189 (lbs) 3.937 4.189 (lbs) 5.315 4.189 (lbs) 5.315 4.189 (lbs) 5.315 5.512 (lbs)

20

E

101 103

20

101 103

F

20

101 103

20

101 103

G

20

101 103

NOTE : X 1R = rotated insert holder for reverse machining NOTE : 3E TECH+ module, charging unit, insert holders, and inserts sold separately

H

I

J

3E TECH+ Digital Readout Module Part No. 536016 NOTE : WEEE-Reg.-Nr. DE 15820388 *Charging unit sold separately Charging Unit* 536015

K

NOTE: 3E TECH+ adjustment accuracy of 0.0001" or 0.001 mm on diameter

L

B10-M: 12-15

B10-F

B10: vi-vii

Key on B10-B: 1

M

= Imperial (in) = Metric (mm)

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

IMPORTANT: Max spindle speed refers to maximum possible speed for an individual boring head and is not a recommended parameter. Refer to page B10-M: 12 for recommended application-specific parameters. Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-B: 6

www.alliedmachine.com | 1.330.343.4283

BORING | Fine Boring | 465 (464) Balance Digital 3E TECH+ Boring Head

464 Balance Digital 3E TECH+ Boring Heads Metric | Alu-Line | Diameter Range: 65.00 mm - 205.00 mm

A

X 1

X 1R

B

91°

D 2 D 5

D 1

D 1

A

D 2

C

L 2

NOTE: Vernier adjustment accuracy of 0.0001" or 0.002 mm on diameter

Form 101

Form 20

464 Balance Digital 3E TECH+ Alu-Line Boring Heads MVS Connection Boring Range

D

Boring Head

Part No.

D 2 | D 1 50 - 28 50 - 28 50 - 28 63 - 36 63 - 36 63 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36

Weight 0.60 (kg) 0.60 (kg) 0.60 (kg) 1.00 (kg) 1.00 (kg) 1.00 (kg) 1.50 (kg) 1.50 (kg) 1.50 (kg) 1.90 (kg) 1.90 (kg) 1.90 (kg) 2.50 (kg) 2.50 (kg) 2.50 (kg)

Insert Form Insert Holder Boring Head

A

X 1

X 1R

L 2

D 5

210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064

464006 464006 464006 464007 464007 464007 464008 464008 464008 464009 464009 464009 464010 464010 464010

65.00 - 83.00 65.00 - 83.00 65.00 - 83.00

75.00 75.00 75.00

39.00 39.00 39.00 54.00 54.00 54.00 54.00 54.00 54.00 54.00 54.00 54.00 54.00 54.00 54.00

73.00 73.00 73.00 88.00 88.00 88.00 88.00 88.00 88.00 88.00 88.00 88.00 88.00 88.00 88.00

- - - - - - - - -

20

E

101 103

82.00 - 103.00 90.00 82.00 - 103.00 90.00 82.00 - 103.00 90.00 100.00 - 130.00 90.00 100.00 - 130.00 90.00 100.00 - 130.00 90.00 125.00 - 167.50 90.00 125.00 - 167.50 90.00 125.00 - 167.50 90.00 162.50 - 205.00 90.00 162.50 - 205.00 90.00 162.50 - 205.00 90.00

20

101 103

F

20

101 103

100.00 100.00 100.00 135.00 135.00 135.00

20

101 103

G

20

101 103

NOTE : X 1R = rotated insert holder for reverse machining NOTE : 3E TECH+ module, charging unit, insert holders, and inserts sold separately

H

I

J

3E TECH+ Digital Readout Module Part No. 536016 NOTE : WEEE-Reg.-Nr. DE 15820388 *Charging unit sold separately Charging Unit* 536015

K

NOTE: 3E TECH+ adjustment accuracy of 0.0001" or 0.001 mm on diameter

L

B10-M: 12-15

B10-F

B10: vi-vii

Key on B10-B: 1

M

= Imperial (in) = Metric (mm)

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

IMPORTANT: Max spindle speed refers to maximum possible speed for an individual boring head and is not a recommended parameter. Refer to page B10-M: 12 for recommended application-specific parameters. Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-B: 7

BORING | Fine Boring | 465 (464) Balance Digital 3E TECH+ Boring Head

Insert Holders for Abrasive Materials Diameter Range: 2.559" - 8.071" (65.00 mm - 205.00 mm)

A

L 1

L 1

B

C

92°

92°

Form 101 / 103

Form 20

D

Insert Holder

Boring Range 2.559 - 8.071 2.559 - 8.071 2.559 - 8.071 65.00 - 205.00 65.00 - 205.00 65.00 - 205.00

Weight

Insert Form

Part No. 211061 211063 211065 211061 211063 211065

L 1

0.709 0.709 0.709 18.00 18.00 18.00

0.066 (lbs) 0.066 (lbs) 0.066 (lbs)

20

101 103

E

0.03 (kg) 0.03 (kg) 0.03 (kg)

20

101 103

NOTE : Insert holders used for abrasive materials to protect boring head against chip wash NOTE : When machining grey cast iron, we recommend using insert holders for abrasive materials with CBN inserts for optimized chip removal.

F

G

H

I

J

K

L

M

B10-M: 12-15

B10-H

B10: vi-vii

Key on B10-B: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

Inserts sold separately = Imperial (in) = Metric (mm)

25-14 32-18

INDEX

B10-B: 8

www.alliedmachine.com | 1.330.343.4283

BORING | Fine Boring | 465 (464) Balance Digital 3E TECH+ Boring Head

Accessories Screws | 3E TECH+ Charging Unit

A

1

B

2

3

C

Screws

D

Part No.

1 Countersunk Screw

Countersunk Screw Service Key

2 Clamping Screw

Clamping Screw Service Key

3 Ball

Boring Head

215323 215338 215338 215338 215338 215462 215462 215462 215462 215462

410151 410152 364138 115180 115505 315943 515178 515178 515178 515178

420001 (410001) 420002 (410002) 465003 (464003) 465004 (464004) 465005 (464005) 465006 (464006) 465007 (464007) 465008 (464008) 465009 (464009) 465010 (464010)

T15 / H T15 / H T15 / H T15 / H T15 / H T20 / H T20 / H T20 / H T20 / H T20 / H

S2 / A s2 / A

364270 364270 364139

E

s2.5 / A s2.5 / A

- - - - - - -

s3 / B s4 / B s4 / B s4 / B s4 / B s4 / B

F

G

3E TECH+ Accessories

H

1 Charging Unit Part No. 536016 NOTE : Charging unit sold separately from 3E TECH+

I

1

J

3E TECH (Old Display) Accessories 1 Sealing Ring

1

2 Battery CR2032

K

Part No. 215483

Part No.

515491 NOTE: Not required for 3E TECH+ (New Display)

2

L

M

B10-M: 12-15

B10: vi-vii

Key on B10-B: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-B: 9

365 (364) Balance and 465 (464) Balance Product Overview

PrimeBore VERSATILE BORING Analog 365 (364) Balance and 465 (464) Balance FINE BORING

Analog fine boring tools for high-production jobs

Wohlhaupter® 365 (364) Balance and 465 (464) Balance analog boring heads offer precision boring with automatic balancing. Our boring heads are specifically engineered to minimize the residual imbalance produced by insert holder displacement. Wohlhaupter Alu-Line boring heads offer a lightweight aluminum design with a wear-resistant coating that reduces weight on the spindle up to 50% yet remains durable in challenging boring applications. The insert holder can also be rotated for reverse machining jobs.

• 365 (364) Balance diameter range: 0.787" - 1.161" (20.00 mm - 29.50 mm) • 465 (464) Balance diameter range: 1.142" - 8.071" (29.00 mm - 205.00 mm) • 465 (464) Balance Alu-Line diameter range: 2.559" - 8.071" (65.00 mm - 205.00 mm) - Special coating on Alu-Line for wear-resistant surface - Alu-Line body reduces tool weight by 50%, reducing stress on the spindle • Internal balancing improves tool life and surface finish • Coolant through

• Vernier diameter adjustment of 0.0001" (0.002 mm) • Insert holder can be rotated for back boring jobs • Max cutting speed: 3,281 SFM (1,000 m/min)

IMPORTANT: Max spindle speed refers to maximum possible speed for an individual boring head and is not a recommended parameter. Refer to page B10-M: 12 for recommended application-specific parameters. Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

B10-B: 10

WOHLHAUPTER ® ANALOG 465 (464) BALANCE BORING HEADS

ANALOG BORING HEAD PART NUMBER CONVERSION

Diameter Range 0.787 - 0.965 0.965 - 1.161 1.142 - 1.516 1.496 - 1.988 1.969 - 2.579 2.559 - 3.268 3.228 - 4.055 3.937 - 5.118 4.921 - 6.594 6.398 - 8.071 20.00 - 24.50 24.50 - 29.50 29.00 - 38.00 38.00 - 50.00 50.00 - 65.50 65.00 - 83.00 82.00 - 103.00 100.00 - 130.00 125.00 - 167.50 162.50 - 205.00

Old Part No.

UPDATED Part No.

365030 365031 365032 365033 365034 365045 365046 365047 365048 365049 364030 364031 364032 364033 364034 364045 364046 364047 364048 364049

No Change No Change

465033 465034 465035 465036 465037 465038 465039 465040 464033 464034 464035 464036 464037 464038 464039 464040

High-production fine boring

Easy diameter adjustment

Self-balancing

No Change No Change

Imperial and metric

FEATURES AN ENHANCED CLAMPING MECHANISM FROM OUR TRUSTED LINE OF 565 (564) BALANCE DIGITAL FINE BORING HEADS

Aluminum bodies with wear-resistant coating from 2.559" - 8.071" (65.00 mm - 205.00 mm)

Highly accurate adjustments through vernier scale

Equipped with self-balancing mechanism

B10-B: 11

BORING | Fine Boring | 365 (364) Balance / 465 (464) Balance Analog Boring Head

365 (364) Balance / 465 (464) Balance Analog Boring Heads Diameter Range: 0.787" - 2.579" (20.00 mm - 65.50 mm)

A

X 1

X 1R

B

91°

A

D 1 D 2

D 1 D 2 D 5

C

L 2

365 (364) Form 101

365 (364) Form 20

X 1

X 1R

D

91°

A

D 1 D 2 D 5

E

465 (464) Form 101

465 (464) Form 20

L 2

365/465 Balance Analog Boring Heads MVS Connection Boring Range

F

Boring Head

Part No.

D 2 | D 1 19 - 11 22 - 11 22 - 11 25 - 14 25 - 14 32 - 18 32 - 18 40 - 22 40 - 22

Weight

Insert Form Insert Holder Boring Head

A

X 1

X 1R

L 2

D 5

364077 210059 210069 210059 210069 264051 264077 210052 210062

365030 365031 365031 465033 465033 465034 465034 465035 465035

0.787 - 0.965 1.811 0.965 - 1.161 1.811 0.965 - 1.161 1.811 1.142 - 1.516 2.205 1.142 - 1.516 2.205 1.496 - 1.988 2.598 1.496 - 1.988 2.598 1.969 - 2.579 2.953 1.969 - 2.579 2.953

- - - - -

1.693 1.713 1.713 2.106 2.106 2.450 2.450 2.854 2.854

-

0.198 (lbs) 0.331 (lbs) 0.331 (lbs) 0.441 (lbs) 0.441 (lbs) 0.882 (lbs) 0.882 (lbs) 1.764 (lbs) 1.764 (lbs)

20*

0.906 0.906 1.063 1.063 1.339 1.339 1.654 1.654

20

G

101

20

101

1.496 1.496 1.850 1.850

20

101

H

20

101

*Not suitable for indexable inserts with a radius of 0.031" (0.80 mm) NOTE : X 1R = rotated insert holder for reverse machining NOTE : Insert holders and inserts sold separately

I

364/464 Balance Analog Boring Heads MVS Connection Boring Range

Boring Head

Part No.

J

D 2 | D 1 19 - 11 22 - 11 22 - 11 25 - 14 25 - 14 32 - 18 32 - 18 40 - 22 40 - 22

Weight 0.09 (kg) 0.15 (kg) 0.15 (kg) 0.20 (kg) 0.20 (kg) 0.40 (kg) 0.40 (kg) 0.80 (kg) 0.80 (kg)

Insert Form Insert Holder Boring Head

A

X 1

X 1R

L 2

D 5

364077 210059 210069 210059 210069 264051 264077 210052 210062

364030 364031 364031 464033 464033 464034 464034 464035 464035

20.00 - 24.50 46.00 24.50 - 29.50 46.00 24.50 - 29.50 46.00 29.00 - 38.00 56.00 29.00 - 38.00 56.00 38.00 - 50.00 66.00 38.00 - 50.00 66.00 50.00 - 65.50 75.00 50.00 - 65.50 75.00

- - - - -

43.00 43.50 43.50 53.50 53.50 63.50 63.50 72.50 72.50

-

20*

23.00 23.00 27.00 27.00 34.00 34.00 42.00 42.00

20

101

20

K

101

38.00 38.00 47.00 47.00

20

101

20

101

L

*Not suitable for indexable inserts with a radius of 0.031" (0.80 mm) NOTE : X 1R = rotated insert holder for reverse machining NOTE : Insert holders and inserts sold separately

B10-M: 12-15

B10-F

B10: vi-vii

M

Key on B10-B: 1

= Imperial (in) = Metric (mm)

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

IMPORTANT: Max spindle speed refers to maximum possible speed for an individual boring head and is not a recommended parameter. Refer to page B10-M: 12 for recommended application-specific parameters. Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-B: 12

www.alliedmachine.com | 1.330.343.4283

BORING | Fine Boring | 465 (464) Balance Analog Boring Head

465 (464) Balance Analog Boring Heads Alu-Line | Diameter Range: 2.559" - 8.071" (65.00 mm - 205.00 mm)

A

X 1

X 1R

B

91°

A

D 1 D 2 D 5

D 1 D 2

C

L 2

Form 101

Form 20

465 Balance Analog Alu-Line Boring Heads MVS Connection Boring Range

D

Boring Head

Part No.

D 2 | D 1 50 - 28 50 - 28 50 - 28 63 - 36 63 - 36 63 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36 D 2 | D 1 50 - 28 50 - 28 50 - 28 63 - 36 63 - 36 63 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36

Weight

Insert Form Insert Holder Boring Head

A

X 1

X 1R

L 2

D 5

210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064

465036 465036 465036 465037 465037 465037 465038 465038 465038 465039 465039 465039 465040 465040 465040

2.559 - 3.268 2.953 2.559 - 3.268 2.953 2.559 - 3.268 2.953 3.228 - 4.055 3.543 3.228 - 4.055 3.543 3.228 - 4.055 3.543 3.937 - 5.118 3.543 3.937 - 5.118 3.543 3.937 - 5.118 3.543 4.921 - 6.594 3.543 4.921 - 6.594 3.543 4.921 - 6.594 3.543 6.398 - 8.071 3.543 6.398 - 8.071 3.543 6.398 - 8.071 3.543

1.535 1.535 1.535 2.126 2.126 2.126 2.126 2.126 2.126 2.126 2.126 2.126 2.126 2.126 2.126

2.854 2.854 2.854 3.445 3.445 3.445 3.445 3.445 3.445 3.445 3.445 3.445 3.445 3.445 3.445

- - - - - - - - -

1.323 (lbs) 1.323 (lbs) 1.323 (lbs) 2.205 (lbs) 2.205 (lbs) 2.205 (lbs) 3.307 (lbs) 3.307 (lbs) 3.307 (lbs) 4.189 (lbs) 4.189 (lbs) 4.189 (lbs) 5.512 (lbs) 5.512 (lbs) 5.512 (lbs)

20

E

101 103

20

101 103

F

20

101 103

3.937 3.937 3.937 5.315 5.315 5.315

20

101 103

G

20

101 103

NOTE : X 1R = rotated insert holder for reverse machining NOTE : Insert holders and inserts sold separately

H

464 Balance Analog Alu-Line Boring Heads MVS Connection Boring Range

Boring Head

Part No.

I

Weight 0.60 (kg) 0.60 (kg) 0.60 (kg) 1.00 (kg) 1.00 (kg) 1.00 (kg) 1.50 (kg) 1.50 (kg) 1.50 (kg) 1.90 (kg) 1.90 (kg) 1.90 (kg) 2.50 (kg) 2.50 (kg) 2.50 (kg)

Insert Form Insert Holder Boring Head

A

X 1

X 1R

L 2

D 5

210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064

464036 464036 464036 464037 464037 464037 464038 464038 464038 464039 464039 464039 464040 464040 464040

65.00 - 83.00 65.00 - 83.00 65.00 - 83.00

75.00 75.00 75.00

39.00 39.00 39.00 54.00 54.00 54.00 54.00 54.00 54.00 54.00 54.00 54.00 54.00 54.00 54.00

72.50 72.50 72.50 87.50 87.50 87.50 87.50 87.50 87.50 87.50 87.50 87.50 87.50 87.50 87.50

- - - - - - - - -

20

101 103

82.00 - 103.00 90.00 82.00 - 103.00 90.00 82.00 - 103.00 90.00 100.00 - 130.00 90.00 100.00 - 130.00 90.00 100.00 - 130.00 90.00 125.00 - 167.50 90.00 125.00 - 167.50 90.00 125.00 - 167.50 90.00 162.50 - 205.00 90.00 162.50 - 205.00 90.00 162.50 - 205.00 90.00

20

J

101 103

20

101 103

K

100.00 100.00 100.00 135.00 135.00 135.00

20

101 103

20

101 103

L

NOTE : X 1R = rotated insert holder for reverse machining NOTE : Insert holders and inserts sold separately

B10-M: 12-15

B10-F

B10: vi-vii

M

Key on B10-B: 1

= Imperial (in) = Metric (mm)

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

IMPORTANT: Max spindle speed refers to maximum possible speed for an individual boring head and is not a recommended parameter. Refer to page B10-M: 12 for recommended application-specific parameters. Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-B: 13

BORING | Fine Boring | 365 (364) Balance / 465 (464) Balance Analog Boring Head

Insert Holders for Abrasive Materials Diameter Range: 2.559" - 8.071" (65.00 mm - 205.00 mm)

A

L 1

L 1

B

C

92°

92°

Form 101 / 103

Form 20

D

Insert Holder

Boring Range 2.559 - 8.071 2.559 - 8.071 2.559 - 8.071 65.00 - 205.00 65.00 - 205.00 65.00 - 205.00

Weight

Insert Form

Part No. 211061 211063 211065 211061 211063 211065

L 1

0.709 0.709 0.709 18.00 18.00 18.00

0.066 (lbs) 0.066 (lbs) 0.066 (lbs)

20

101 103

E

0.03 (kg) 0.03 (kg) 0.03 (kg)

20

101 103

NOTE : Insert holders used for abrasive materials to protect boring head against chip wash NOTE : When machining grey cast iron, we recommend using insert holders for abrasive materials with CBN inserts for optimized chip removal.

F

G

H

I

J

K

L

M

B10-M: 12-15

B10-H

B10: vi-vii

Key on B10-B: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

Inserts sold separately = Imperial (in) = Metric (mm)

25-14 32-18

INDEX

B10-B: 14

www.alliedmachine.com | 1.330.343.4283

BORING | Fine Boring | 365 (364) Balance / 465 (464) Balance Analog Boring Head

Accessories Screws

A

1

B

2

3

C

D

Part No.

1 Countersunk Screw

Countersunk Screw Service Key

2 Clamping Screw

Clamping Screw Service Key

3 Ball

Boring Head

215323 215338 215338 215338 215338 215462 215462 215462 215462 215462

364260 364138 364138 115180 115505 315943 515178 515178 515178 515178

364270 364139 364139

365030 (364030) 365031 (364031) 465033 (464033) 465034 (464034) 465035 (464035) 465036 (464036) 465037 (464037) 465038 (464038) 465039 (464039) 465040 (464040)

T15 / H T15 / H T15 / H T15 / H T15 / H T20 / H T20 / H T20 / H T20 / H T20 / H

s2 / A

s2.5 / A s2.5 / A s2.5 / A

E

- - - - - - -

s3 / B s4 / B s4 / B s4 / B s4 / B s4 / B

F

G

H

I

J

K

L

M

B10-M: 12-15

B10: vi-vii

Key on B10-B: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-B: 15

565 (564) Balance Digital Product Overview

565 (564) Balance Digital FINE BORING

Adjustable diameter for precise machining.

Wohlhaupter® Digital 565 (564) Balance boring heads feature automatic balancing with an easy-to-read digital display. For diameter ranges above 2.559" (65.00 mm), 565 (564) boring heads are made of lightweight aluminum. 565 (564) boring heads are specifically engineered to minimize the residual imbalance produced by insert holder displacement. Reverse boring applications can be achieved by rotating the insert holders.

Test the engineered lightweight boring head today.

• Diameter range: 1.969" - 8.071" (50.00 mm - 205.00 mm) • Alu-Line diameter range: 2.559" - 8.071" (65.00 mm - 205.00 mm) - Special coating on Alu-Line for wear-resistant surface - Alu-Line body reduces tool weight by 50%, reducing stress on the spindle • Digital readout advantage for diameter adjustments of 0.0001" (0.002 mm) • Coolant through • Internal balancing improves tool life and surface finish

• Insert holder can be rotated for back boring jobs • Max cutting speed: 6,562 SFM (2,000 m/min) • Max coolant pressure: 580 PSI (40 bar)

NOTE: Digital adjustment accuracy of 0.0001" or 0.002 mm on diameter NOTE : Imperial items pictured

Aluminum Boring Head 2.559" - 8.071" (65.00 mm - 205.00 mm)

Steel Boring Head 1.969" - 2.579" (50.00 mm - 65.50 mm)

IMPORTANT: Max spindle speed refers to maximum possible speed for an individual boring head and is not a recommended parameter. Refer to page B10-M: 12 for recommended application-specific parameters. Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

B10-B: 16

WOHLHAUPTER ® 565 (564) BALANCE DIGITAL BORING HEAD with NOVI TECH ®

Boring head 565 (564) series Item No. 565045 NOVI TECH ® vibration dampening intermediate module Item No. 519005

NOTE: Digital adjustment accuracy of 0.0001" or 0.002 mm on diameter NOTE : Imperial item pictured

The Wohlhaupter 565 (564) Balance digital boring head with the NOVI TECH® vibration dampening module provided:

Excellent surface finish

Eliminated vibration and chatter

565 (564) Balance Boring Head with NOVI TECH®

Measure

Product:

Wohlhaupter 565 (564) Balance boring head with NOVI TECH ® 0.002" ( 0.05 mm ) concentricity over the length of two bores spaced 14" ( 355.60 mm ) apart

RPM

430 RPM

Objectives:

Speed

352 SFM ( 107.28 m/min ) 0.003 IPR ( 0.08 mm/rev )

Feed Rate

Material: Hole Ø:

Cast iron

Penetration Rate

1.29 IPM ( 33 mm/min )

3.125" ( 79.38mm )

Cycle Time (per hole)

3 min 32 sec

Depth:

7xD

Hole Finish

155 Ra µin. (3.8 Ra µm)

B10-B: 17

BORING | Fine Boring | 565 (564) Balance Digital Boring Head

565 (564) Balance Digital Boring Heads Diameter Range: 1.969" - 2.579" (50.00 mm - 65.50 mm)

A

X 1

X 1R

B

91°

A

D 1 D 2 D 5

NOTE: Digital adjustment accuracy of 0.0001" or 0.002 mm on diameter NOTE : Imperial item pictured

C

L 2

Form 101

Form 20

565 Balance Digital Boring Heads MVS Connection

D

Boring Range

Boring Head

Part No.

D 2 | D 1 40 - 22 40 - 22

Weight

Insert Form Insert Holder Boring Head

A

X 1

X 1R

L 2

D 5

210052 210062

565034 565034

1.969 - 2.579 1.969 - 2.579

2.953 2.953

1.850 1.850

2.854 2.854

1.654 1.764 (lbs) 1.654 1.764 (lbs)

20

E

101

NOTE : X 1R = rotated insert holder for reverse machining NOTE : Insert holders and inserts sold separately

564 Balance Digital Boring Heads MVS Connection

F

Boring Range

Boring Head

Part No.

D 2 | D 1 40 - 22 40 - 22

Weight 0.80 (kg) 0.80 (kg)

Insert Form Insert Holder Boring Head

A

X 1

X 1R

L 2

D 5

210052 210062

564034 564034

50.00 - 65.50 50.00 - 65.50

75.00 75.00

47.00 47.00

72.50 72.50

42.00 42.00

20

G

101

NOTE : X 1R = rotated insert holder for reverse machining NOTE : Insert holders and inserts sold separately

H

I

J

K

L

B10-M: 12-15

B10-F

B10: vi-vii

M

Key on B10-B: 1

= Imperial (in) = Metric (mm)

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

IMPORTANT: Max spindle speed refers to maximum possible speed for an individual boring head and is not a recommended parameter. Refer to page B10-M: 12 for recommended application-specific parameters. Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-B: 18

www.alliedmachine.com | 1.330.343.4283

BORING | Fine Boring | 565 (564) Balance Digital Boring Head

565 (564) Balance Digital Boring Heads Alu-Line | Diameter Range: 2.559" - 8.070" (65.00 mm - 205.00 mm)

A

X 1

X 1R

91°

B

A

D 1 D 2

D 5

D 1 D 2

C

NOTE: Digital adjustment accuracy of 0.0001" or 0.002 mm on diameter NOTE : Imperial item pictured

L 2

Form 20

Form 101

565 Balance Digital Alu-Line Boring Heads MVS Connection Boring Range

D

Boring Head

Part No.

D 2 | D 1 50 - 28 50 - 28 50 - 28 63 - 36 63 - 36 63 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36 D 2 | D 1 50 - 28 50 - 28 50 - 28 63 - 36 63 - 36 63 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36 80 - 36

Weight

Insert Form Insert Holder Boring Head

A

X 1

X 1R

L 2

D 5

210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064

564045 564045 564045 564046 564046 564046 564047 564047 564047 564048 564048 564048 564049 564049 564049 565045 565045 565045 565046 565046 565046 565047 565047 565047 565048 565048 565048 565049 565049 565049

2.559 - 3.268 2.559 - 3.268 2.559 - 3.268 3.228 - 4.055 3.228 - 4.055 3.228 - 4.055 3.937 - 5.118 3.937 - 5.118 3.937 - 5.118 4.921 - 6.594 4.921 - 6.594 4.921 - 6.594 6.398 - 8.071 6.398 - 8.071 6.398 - 8.071

2.953 2.953 2.953 3.543 3.543 3.543 3.543 3.543 3.543 3.543 3.543 3.543 3.543 3.543 3.543

1.535 1.535 1.535 2.126 2.126 2.126 2.126 2.126 2.126 2.126 2.126 2.126 2.126 2.126 2.126

2.874 2.874 2.874 3.464 3.464 3.464 3.464 3.464 3.464 3.464 3.464 3.464 3.464 3.464 3.464

- 1.323 (lbs) - 1.323 (lbs) - 1.323 (lbs) - 2.205 (lbs) - 2.205 (lbs) - 2.205 (lbs) - 3.307 (lbs) - 3.307 (lbs) - 3.307 (lbs) 3.397 3.307 (lbs) 3.937 4.189 (lbs) 3.937 4.189 (lbs) 5.315 4.189 (lbs) 5.315 4.189 (lbs) 5.315 5.512 (lbs)

20

E

101 103

20

101 103

F

20

101 103

20

101 103

G

20

101 103

NOTE : X 1R = rotated insert holder for reverse machining NOTE : Insert holders and inserts sold separately

H

564 Balance Digital Alu-Line Boring Heads MVS Connection Boring Range

Boring Head

Part No.

I

Weight 0.60 (kg) 0.60 (kg) 0.60 (kg) 1.00 (kg) 1.00 (kg) 1.00 (kg) 1.50 (kg) 1.50 (kg) 1.50 (kg) 1.90 (kg) 1.90 (kg) 1.90 (kg) 2.50 (kg) 2.50 (kg) 2.50 (kg)

Insert Form Insert Holder Boring Head

A

X 1

X 1R

L 2

D 5

65.00 - 83.00 65.00 - 83.00 65.00 - 83.00

75.00 75.00 75.00

39.00 39.00 39.00 54.00 54.00 54.00 54.00 54.00 54.00 54.00 54.00 54.00 54.00 54.00 54.00

73.00 73.00 73.00 88.00 88.00 88.00 88.00 88.00 88.00 88.00 88.00 88.00 88.00 88.00 88.00

- - - - - - - - -

20

101 103

82.00 - 103.00 90.00 82.00 - 103.00 90.00 82.00 - 103.00 90.00 100.00 - 130.00 90.00 100.00 - 130.00 90.00 100.00 - 130.00 90.00 125.00 - 167.50 90.00 125.00 - 167.50 90.00 125.00 - 167.50 90.00 162.50 - 205.00 90.00 162.50 - 205.00 90.00 162.50 - 205.00 90.00

20

J

101 103

20

101 103

K

100.00 100.00 100.00 135.00 135.00 135.00

20

101 103

20

101 103

L

NOTE : X 1R = rotated insert holder for reverse machining NOTE : Insert holders and inserts sold separately

B10-M: 12-15

B10-F

B10: vi-vii

M

Key on B10-B: 1

= Imperial (in) = Metric (mm)

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

IMPORTANT: Max spindle speed refers to maximum possible speed for an individual boring head and is not a recommended parameter. Refer to page B10-M: 12 for recommended application-specific parameters. Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-B: 19

BORING | Fine Boring | 565 (564) Balance Digital Boring Head

Insert Holder for Abrasive Materials Diameter Range: 2.559" - 8.071" (65.00 mm - 205.00 mm)

A

L 1

L 1

B

C

92°

92°

Form 101 / 103

Form 20

D

Insert Holder

Boring Range 2.559 - 8.071 2.559 - 8.071 2.559 - 8.071 65.00 - 205.00 65.00 - 205.00 65.00 - 205.00

Weight

Insert Form

Part No. 211061 211063 211065 211061 211063 211065

L 1

0.709 0.709 0.709 18.00 18.00 18.00

0.066 (lbs) 0.066 (lbs) 0.066 (lbs)

20

101 103

E

0.03 (kg) 0.03 (kg) 0.03 (kg)

20

101 103

NOTE : Insert holders used for abrasive materials to protect boring head against chip wash NOTE : When machining grey cast iron, we recommend using insert holders for abrasive materials with CBN inserts for optimized chip removal.

F

G

H

I

J

K

L

M

B10-M: 12-15

B10-H

B10: vi-vii

Key on B10-B: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

Inserts sold separately = Imperial (in) = Metric (mm)

25-14 32-18

INDEX

B10-B: 20

www.alliedmachine.com | 1.330.343.4283

BORING | Fine Boring | 565 (564) Balance Digital Boring Head

Accessories Screws | Battery Cover | Batteries

A

1

4

B

2

C

3

D

Part No.

1 Countersunk Screw

Service Key T15 / H T20 / H T20 / H T20 / H T20 / H T20 / H

2 Clamping Screw Service Key

3 Battery Cover

4 Sealing Ring

Boring Head

Service Key

Battery* 415896 415896 415896 415896 415896 415896

215338 215462 215462 215462 215462 215462

115505 315943 515178 515178 515178 515178

501016 501016 501016 501016 501016 501016

415895 415895 415895 415895 415895 415895

565034 (564034) 565045 (564045) 565046 (564046) 565047 (564047) 565048 (564048) 565049 (564049)

s3 / B s4 / B s4 / B s4 / B s4 / B s4 / B

T20 / H T20 / H T20 / H T20 / H T20 / H T20 / H

E

*Replace both batteries

F

G

H

I

J

K

L

M

B10-M: 12-15

B10: vi-vii

Key on B10-B: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-B: 21

320 (310) Product Overview

PrimeBore VERSATILE BORING 320 (310) Analog FINE BORING

Engineered with wear and tear in mind.

320 (310) Wohlhaupter boring heads are made from steel for Ø 0.787" - 4.055" (20.00 mm - 103.00 mm) and coated Alu-Line material for Ø 3.937" - 8.071" (100.00 mm - 205.00 mm) boring heads to protect against corrosion and wear. The insert holder can be rotated quickly for reverse machining.

• Diameter range: 0.787" - 8.071" (20.00 mm - 205.00 mm) • Alu-Line diameter range: 3.937" - 8.071" (100.00 mm - 205.00 mm) - Special coating on Alu-Line provides hard, durable surface - Alu-Line body reduces tool weight by 50%, reducing stress on the spindle • Coolant through • Vernier diameter adjustment of 0.0001" (0.002 mm) • Max cutting speed: 3,281 SFM (1,000 m/min)

IMPORTANT: Max spindle speed refers to maximum possible speed for an individual boring head and is not a recommended parameter. Refer to page B10-M: 12 for recommended application-specific parameters. Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

B10-B: 22

Made with FlippingBook Ebook Creator