B10-G_US-EN

BORING | Large Diameter Boring

Insert Holders for Rough Machining

A

B

90° Insert Holders Insert Holder

Insert Form

K

X 1

Weight

ISO Code CC..09T3.. CC..1204.. CC..1204.. CC..1605.. CC..09T3.. CC..1204.. CC..1204.. CC..1605..

Part No. 149090 149099 149083 149093 149090 149099 149083 149093

90° 1.180 1.322 (lbs) 90° 1.180 1.322 (lbs) 90° 1.150 1.322 (lbs) 90° 1.180 1.322 (lbs) 90° 30.00 0.60 (kg) 90° 30.00 0.60 (kg) 90° 29.30 0.60 (kg) 90° 30.00 0.60 (kg)

103 104 104 105 103 104 104 105

C

K

X 1

D

E

90° Tangential Insert Holders Insert Holder

F

K

K

X 1

Weight

ISO Code Tangential Tangential Tangential Tangential

Insert Form

Part No. 149010 149020 149010 149020

90° 90° 90° 90°

1.180 1.322 (lbs) 1.150 1.322 (lbs) 30.00 0.60 (kg) 29.30 0.60 (kg)

05 05 05 05

X 1

G

H

80° Insert Holders Insert Holder

I

K

X 1

Weight

ISO Code SC..1204.. SC..150512 SN..1506.. SC..1204.. SC..150512 SN..1506..

Insert Form

Part No. 149089 149094 149096 149089 149094 149096

K

80° 80° 80° 80° 80° 80°

1.180 1.322 (lbs) 1.180 1.322 (lbs) 1.180 1.322 (lbs) 30.00 0.60 (kg) 30.00 0.60 (kg) 30.00 0.60 (kg)

113 114 134 113 114 134

X 1

J

K

B10-M: 12-15

B10-G: 22-25

B10-H

B10: vi-vii

Key on B10-G: 1

Inserts sold separately = Imperial (in) = Metric (mm)

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-G: 12

www.alliedmachine.com | 1.330.343.4283