B10-G_US-EN

BORING | Large Diameter Boring

538 (537) Accessories Clamping Pieces | Counter Weight | Insert Holders for Abrasive Materials

A

B

C

3

538 (537) Clamping Pieces

Replacement Components

Complete Part No.

1 Cap Screw

2 Clamping Nut

3 Disk Spring

Slide Type

Service Key

D

137026 137027 137019

Serrated Tool Bodies Basic and Eco Slides

215101 215102 415900

140118 215105 215105

337105 337105 337105

115578 s6 / B

1

Flex Slides

2

E

F

538 (537) Counter Weights

Boring Range 3.937 - 128.15

Part No. 538055

G

100.00 - 3255.00 537055 NOTE: Clamping piece sold separately

H

L 1

Insert Holders for Abrasive Materials

I

Boring Range 3.937 - 128.150 3.937 - 128.150 3.937 - 128.150 100.00 - 3255.00 100.00 - 3255.00 100.00 - 3255.00

L 1

Weight

Insert Form Part No.

92°

Form 101 Form 103

211061 211063 211065 211061 211063 211065

0.708 0.708 0.708 18.00 18.00 18.00

0.066 (lbs) 0.066 (lbs) 0.066 (lbs)

20

Chip guard

101 103

L 1

J

0.03 (kg) 0.03 (kg) 0.03 (kg)

20

101 103

92°

Form 20

K

B10-M: 12-15

B10: vi-vii

Key on B10-G: 1

Inserts sold separately = Imperial (in) = Metric (mm)

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING

Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) -When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio WARNING

M

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-G: 20

www.alliedmachine.com | 1.330.343.4283