B10-G_US-EN

Wohlhaupter large diameter boring tools

Drilling

Reaming

Burnishing

Threading

Wohlhaupter ® BORING Large Diameter Boring Tools

Specials

S E C T I O N B10-G Large Diameter Boring

Wohlhaupter ® Large Diameter Boring Basic D 40 | Basic D 60 | Eco D 60 | Flex D 60 Diameter Range: 7.874" - 128.150" (200.00 mm - 3255.00 mm)

Boring Big? Wohlhaupter has continued to expand our large diameter boring capabilities with Alu-Line. Our Alu-Line serrated slides and tool bodies are made of lightweight aluminum alloy to minimize the weight while still getting the heavy boring job done. The versatile serrated slides and serrated tool bodies allow for boring 7.874" (200.00 mm) up to 128.150" (3255.00 mm), offering the most powerful and versatile tool ranges to our customers.

Your safety and the safety of others is very important. This catalog contains important safety messages. Always read and follow all safety precautions. This triangle is a safety hazard symbol. It alerts you to potential safety hazards that can cause tool failure and serious injury. When you see this symbol in the catalog, look for a related safety message that may be near this triangle or referred to in the nearby text. There are safety signal words also used in the catalog. Safety messages follow these words. WARNING (shown above) means that failure to follow the precautions in this message could result in tool failure and serious injury. NOTICE means that failure to follow the precautions in this message could result in damage to the tool or machine but not result in personal injury. NOTE and IMPORTANT are also used. These are important that you read and follow but are not safety-related. Visit www.alliedmachine.com for the most up-to-date information and procedures. WARNING

Applicable Industries

Aerospace Agriculture

Automotive

Firearms

General Machining

Oil & Gas

Renewable Energy

Reference Icons The following icons will appear throughout the catalog to help you navigate between products. Clamping Elements For use with insert holders and boring heads

Large Diameter Boring Table of Contents

Introduction Product Overview . . . . . . . . . . . . . . . . 2 - 3

Serrated Slides Alu-Line Basic D 40 Serrated Slides . . . . . . . . . . . . . . . . . 4 Alu-Line Basic D 60 Serrated Slides . . . . . . . . . . . . . . . . . 5 Alu-Line Eco D 60 Serrated Slides . . . . . . . . . . . . . . . . . 6 Alu-Line Flex D 60 Serrated Slides . . . . . . . . . . . . . . . . . 7

Shanks A variety of shanks for different machines

Inserts For use with insert holder boring heads and boring bars using indexable inserts MVS Connection Color Guide Detailed instructions and information regarding the MVS connection(s)

Serrated Adapters with MVS Connection . . . . . . . . . . . . . . . . 8 - 9

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

538 (537) Boring Cassettes 53 8 (537) Analog Cassettes . . . . . . . . . . . . . . . . . 10 538 (537) 3E TECH+ Digital Cassettes . . . . . . . . . . . . . . . . . 11 Insert Holders Insert Holders for Rough Machining . . . . . . . . . . . . . . 12 - 13 Insert Holders for Height Adjustments and Axial Grooving . . . . . . . . . . . . . . . . . 14

25-14 32-18

Recommended Cutting Data Speed and feed recommendations for optimum and safe boring

Coolant-Through Option Indicates that the product is coolant through

Holding Arbors and Shanks

MVS Holding Arbors . . . . . . . . . . . . . . . . . 15 Master Shanks . . . . . . . . . . . . . . 16 - 19

Accessories . . . . . . . . . . . . . . 20 - 25

Diameter Range

Series

Imperial (inch) 7.874 - 20.472 7.874 - 19.882 18.307 - 40.157 19.685 - 128.150

Metric (mm)

Basic D 40 Slides Basic D 60 Slides Eco D 60 Slides Flex D 60 Slides

200.00 - 520.00 200.00 - 505.00 465.00 - 1020.00 500.00 - 3255.00

B10-G: 1

Large Diameter Boring Product Overview

Large Diameter BORING

Boring big? We've got you covered. Our versatile tooling system can provide the power and precision your large diameter boring jobs demand. The large diameter boring system offers four different Alu-Line serrated slides, a wide range of rough and finish boring insert holders, vernier and digital cassettes, and combined rough and finish insert holders. • Diameter range: 7.874" - 128.150" (200.00 mm - 3255.00 mm) • Basic, Eco, and Flex serrated slides • Roughing, finishing, or combined roughing and finishing can be achieved in one pass • Digital readout cassettes available for quick and easy adjustments • Alu-Line serrated slides and tool bodies are made of lightweight aluminum

B10-G: 2

X Basic D 40 Serrated Slides for Finish Boring

350021 (349021) Ø 7.874" - 11.023" (Ø 200.00 mm – 280.00 mm)

350023 (349023) Ø 14.173" - 17.322" (Ø 360.00 mm – 440.00 mm)

350022 (349022) Ø 11.023" - 14.173" (Ø 280.00 mm – 360.00 mm)

350024 (349024) Ø 17.322" - 20.472" (Ø 440.00 mm – 520.00 mm)

X Basic D 60 Serrated Slides for Rough and Finish Boring

350051 (349051) Ø 7.874" - 11.023" (Ø 200.00 mm – 280.00 mm)

350053 (349053) Ø 13.779" - 16.929" (Ø 350.00 mm – 430.00 mm)

350052 (349052) Ø 10.826" - 13.976" (Ø 275.00 mm – 355.00 mm)

350054 (349054) Ø 16.732" - 19.881" (Ø 425.00 mm – 505.00 mm)

X Eco D 60 Serrated Slides for Rough and Finish Boring

350005 (349005) Ø 18.307" - 29.330" (Ø 465.00 mm – 745.00 mm)

350014 (349014) / 350015 (350015) Serrated slide for base slides 350005 (349005) / 350006 (349006)

350006 (349006) Ø 29.133" - 40.157" (Ø 740.00 mm – 1020.00 mm)

X Flex D 60 Serrated Slides for Rough and Finish Boring

350035 (349035) Serrated slide for base slides 350031 (349031) | 350032 (349032) 350033 (349033) | 350034 (349034)

350031 (349031) Ø 19.685" - 41.535" (Ø 500.00 mm – 1055.00 mm)

350036 (349036) Serrated slide for base slides 350031 (349031) | 350032 (349032) 350033 (349033) | 350034 (349034)

350032 (349032) Ø 29.724" - 63.188" (Ø 755.00 mm – 1605.00 mm)

350033 (349033) Ø 52.165" - 95.669" (Ø 1325.00 mm – 2430.00 mm)

350037 (349037) Serrated slide for base slides 350032 (349032) | 350033 (349033) 350034 (349034)

350034 (349034) Ø 84.645" - 128.149" (Ø 2150.00 mm – 3255.00 mm)

350038 (349038) Serrated slide for base slides 350033 (349033) | 350034 (349034)

B10-G: 3

BORING | Large Diameter Boring

Alu-Line Basic D 40 Serrated Slides Diameter Range: 7.874" - 20.472" (200.00 mm - 520.00 mm)

A

A

30 mm

B

X 1

D 5

C

L 4

L 5

D

Connection

Boring Range

Serrated Slide

D 5

A

X 1

L 4

L 5

Weight

Part No. 350021 350022 350023 350024 349021 349022 349023 349024

E

D 40 D 40 D 40 D 40 D 40 D 40 D 40 D 40

7.874 - 11.024 11.024 - 14.173 14.173 - 17.323 17.323 - 20.472 200.00 - 280.00 280.00 - 360.00 360.00 - 440.00 440.00 - 520.00

2.953 2.953 2.953 2.953 75.00 75.00 75.00 75.00

7.480

3.149 3.149 3.149 3.149 80.00 80.00 80.00 80.00

6.173 (lbs) 8.377 (lbs) 11.023 (lbs) 13.228 (lbs)

10.620 13.770 16.320 190.00 270.00 350.00 430.00

2.80 (kg) 3.80 (kg) 5.00 (kg) 6.00 (kg)

F

G

H

I

J

K

B10-M: 12-15

B10-G: 22

B10-G: 16-19

B10-H

B10: vi-vii

Key on B10-G: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-G: 4

www.alliedmachine.com | 1.330.343.4283

BORING | Large Diameter Boring

Alu-Line Basic D 60 Serrated Slides Diameter Range: 7.874" - 19.882" (200.00 mm - 505.00 mm)

A

A

30 mm

B

X 1

D 5

L 4

C

L 5

D

Connection

Boring Range

Serrated Slide

D 5

A

X 1

L 4

L 5

Weight

Part No. 350051 350052 350053 350054 349051 349052 349053 349054

E

D 60 D 60 D 60 D 60 D 60 D 60 D 60 D 60

7.874 - 11.024 10.827 - 13.976 13.780 - 16.929 16.732 - 19.882 200.00 - 280.00 275.00 - 355.00 350.00 - 430.00 425.00 - 505.00

3.346 3.346 3.346 3.346 85.00 85.00 85.00 85.00

7.520

4.330 4.330 4.921 4.921

9.038 (lbs) 11.464 (lbs) 15.211 (lbs) 17.637 (lbs)

10.394 13.346 16.299 191.00 264.00 339.00 414.00

110.00 110.00 125.00 125.00

4.10 (kg) 5.20 (kg) 6.90 (kg) 8.00 (kg)

F

G

H

I

J

K

B10-M: 12-15

B10-G: 23

B10-G: 16-19

B10-H

B10: vi-vii

Key on B10-G: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-G: 5

BORING | Large Diameter Boring

Alu-Line Eco D 60 Serrated Slides Diameter Range: 18.307" - 40.157" (465.00 mm - 1020.00 mm)

A

A

30 mm

2

X 1

B

1

D 5

L 4

C

L 5

D

2 Serrated Slide (Alu-Line)*

2 Serrated Slide (steel)**

Connection

Boring Range

Serrated Slide

1 Base Slide

D 5

A

X 1

L 4

L 5

Weight

Part No. 350005 350006 349005 349006

Weight

Part No. 350015 350015 349015 349015

Weight

Part No. 350014 350014 349014 349014

E

D 60 D 60 D 60 D 60

18.307 - 29.331 6.102 17.590 5.078 26.010 (lbs) 29.134 - 40.157 6.102 28.420 5.078 39.680 (lbs) 465.00 - 745.00 155.00 447.00 129.00 11.80 (kg) 740.00 - 1020.00 155.00 722.00 129.00 18.00 (kg)

4.850 (lbs) 4.850 (lbs)

12.560 (lbs) 12.560 (lbs)

2.20 (kg) 2.20 (kg)

5.70 (kg) 5.70 (kg)

* Finish boring: serrated slide in Alu-Line **Rough boring: serrated slide in steel

F

G

H

I

J

K

B10-M: 12-15

B10-G: 24

B10-G: 16-19

B10-H

B10: vi-vii

Key on B10-G: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-G: 6

www.alliedmachine.com | 1.330.343.4283

BORING | Large Diameter Boring

Alu-Line Flex D 60 Serrated Slides Diameter Range: 19.685" - 128.150" (500.00 mm - 3255.00 mm)

A

A

30 mm

2

B

X 1

D 5

1

C

L 4

L 5

D

Connection

Boring Range

Serrated Slide

Part No.

D 5

A

X 1

L 4

L 5

Weight (1 + 2) 53.360 (lbs) 91.060 (lbs) 93.710 (lbs) 131.400 (lbs) 190.200 (lbs) 194.400 (lbs) 232.100 (lbs) 291.000 (lbs) 374.400 (lbs) 424.400 (lbs) 462.100 (lbs) 520.300 (lbs) 604.100 (lbs)

1 Base Slide 2 Serrated Slide

E

350031 350031 350032 350032 350032 350033 350033 350033 350033 350034 350034 350034 350034 349031 349031 349032 349032 349032 349033 349033 349033 349033 349034 349034 349034 349034

350035 350036 350035 350036 350037 350035 350036 350037 350038 350035 350036 350037 350038 349035 349036 349035 349036 349037 349035 349036 349037 349038 349035 349036 349037 349038

D 60 D 60 D 60 D 60 D 60 D 60 D 60 D 60 D 60 D 60 D 60 D 60 D 60 D 60 D 60 D 60 D 60 D 60 D 60 D 60 D 60 D 60 D 60 D 60 D 60 D 60

19.685 - 30.709 37.402 - 41.535 30.512 - 41.535 41.339 - 52.362 56.772 - 63.189 52.165 - 63.189 52.165 - 74.016 62.992 - 84.843 78.346 - 95.669 84.646 - 95.669 84.646 - 106.496 84.646 - 117.323 84.646 - 128.150 500.00 - 780.00 950.00 - 1055.00 775.00 - 1055.00 1050.00 - 1330.00 1442.00 - 1605.00 1325.00 - 1605.00 1325.00 - 1880.00 1600.00 - 2155.00 1990.00 - 2430.00 2150.00 - 2430.00 2150.00 - 2705.00 2150.00 - 2980.00 2150.00 - 3255.00

6.299 7.283 7.283 8.268 8.858 8.268 9.252 9.843

18.898 18.898 29.724 29.724 29.724 51.378 51.378 51.378 51.378 83.858 83.858 83.858 83.858 480.00 480.00 755.00 755.00 755.00 1305.00 1305.00 1305.00 1305.00 2130.00 2130.00 2130.00 2130.00

5.118 5.118 6.102 6.102 6.102 7.283 7.283 7.283 7.283 8.858 8.858 8.858 8.858

F

10.039

9.252

G

10.236 10.827 11.024 160.00 185.00 185.00 210.00 225.00 210.00 235.00 250.00 255.00 235.00 260.00 275.00 280.00

130.00 130.00 155.00 155.00 155.00 185.00 185.00 185.00 185.00 225.00 225.00 225.00 225.00

24.20 (kg) 41.30 (kg) 42.50 (kg) 59.60 (kg) 86.30 (kg) 88.20 (kg) 105.30 (kg) 132.00 (kg) 169.80 (kg) 192.50 (kg) 209.60 (kg) 236.00 (kg) 274.00 (kg)

H

I

J

K

B10-M: 12-15

B10-G: 25

B10-G: 16-19

B10-H

B10: vi-vii

Key on B10-G: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-G: 7

BORING | Large Diameter Boring

Serrated Adapter with MVS Connection

A

D 2 D 1

Mounting Adapter

B

MVS Connection

Mounting Adapters

X 1

D 2 | D 1 50 - 28

X 1

X 2

L 1

L 2

Weight

Part No. 349046

X 2

1.969 1.063 3.976 2.992 2.866 (lbs)

C

349046

50 - 28

50.00 27.00 101.00 76.00 1.30 (kg)

L 2

L 1

D

Inside Boring

ID Bore Range

E

Slide

Boring Heads

inch

mm

349/350051 349/350052 349/350053 349/350054

320005/465006/565045 8.465 - 12.323 215.00 - 313.00 320005/465006/565045 11.417 - 15.276 290.00 - 388.00 320005/465006/565045 14.370 - 18.228 365.00 - 463.00

F

320005/465006/565045 17.323 - 21.181 440.00 - 538.00 349/350005 with 349/350015 320005/465006/565045 18.898 - 30.630 480.00 - 778.00

G

H

Outside Boring

OD Bore Range

Slide

Boring Heads

inch

mm

I

349/350051 349/350052 349/350053 349/350054

320005/465006/565045 2.638 - 6.496 67.00 - 165.00 320005/465006/565045 5.591 - 9.449 142.00 - 240.00 320005/465006/565045 8.543 - 12.402 217.00 - 315.00

320005/465006/565045 11.496 - 15.354 292.00 - 390.00 349/350005 with 349/350015 320005/465006/565045 13.071 - 24.803 332.00 - 630.00 NOTE: LH only spindle rotation

J

K

B10-M: 12-15

B10: vi-vii

Key on B10-G: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-G: 8

www.alliedmachine.com | 1.330.343.4283

BORING | Large Diameter Boring

Serrated Adapter with MVS Connection

A

D 2 D 1

Mounting Adapter

B

MVS Connection

Mounting Adapters

X 1

D 2 | D 1 50 - 28

X 1

X 2

L 1

L 2

Weight

Part No. 349046

X 2

1.969 1.063 3.976 2.992 2.866 (lbs)

C

349046

50 - 28

50.00 27.00 101.00 76.00 1.30 (kg)

L 2

L 1

D

Inside Boring

ID Bore Range

E

Slide

Boring Heads

inch

mm

349/350051 349/350052 349/350053 349/350054

320005/465006/565045 2.559 - 5.039 65.00 -128.00 320005/465006/565045 4.134 - 7.992 105.00 - 203.00 320005/465006/565045 7.087 - 10.945 180.00 - 278.00

F

320005/465006/565045 10.039 - 13.898 255.00 - 353.00 349/350005 with 349/350015 320005/465006/565045 11.614 - 23.346 295.00 - 593.00

G

H

Outside Boring

OD Bore Range

Slide

Boring Heads

inch

mm

I

349/350051 349/350052 349/350053 349/350054

320005/465006/565045

-

-

320005/465006/565045 0.000 - 2.165

0.00 - 55.00

320005/465006/565045 1.260 - 5.118 32.00 - 130.00

320005/465006/565045 4.213 - 8.071 107.00 - 205.00 349/350005 with 349/350015 320005/465006/565045 5.787 - 17.520 147.00 - 445.00 NOTE: LH only spindle rotation

J

K

B10-M: 12-15

B10: vi-vii

Key on B10-G: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-G: 9

BORING | Large Diameter Boring

538 (537) Analog Cassettes Diameter Range: 3.937" - 128.150" (100.00 mm - 3255.00 mm)

A

A

85.6 mm

2.0 mm Hub

B

30 mm

C

Form 101

Form 20

D

Boring Range

Part No.

Slide Type

A

Weight

Insert Form Insert Holder

Clamping Piece

Cassette 538051 538051 538051 538051 538051 538051 538051 538051 538051 537051 537051 537051 537051 537051 537051 537051 537051 537051

210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064

137026 137026 137026 137027 137027 137027 137019 137019 137019 137026 137026 137026 137027 137027 137027 137019 137019 137019

3.937 - 8.071 3.937 - 8.071 3.937 - 8.071 7.874 - 40.157 7.874 - 40.157 7.874 - 40.157 19.685 - 128.150 19.685 - 128.150 19.685 - 128.150 100.00 - 205.00 100.00 - 205.00 100.00 - 205.00 200.00 - 1020.00 200.00 - 1020.00 200.00 - 1020.00 500.00 - 3255.00 500.00 - 3255.00 500.00 - 3255.00

1.323 (lbs) 1.323 (lbs) 1.323 (lbs) 1.323 (lbs) 1.323 (lbs) 1.323 (lbs) 1.323 (lbs) 1.323 (lbs) 1.323 (lbs)

20

Serrated Tool Bodies

101 103

E

20

Basic / Eco Slides

101 103

20

F

Flex Slides

101 103

0.60 (kg) 0.60 (kg) 0.60 (kg) 0.60 (kg) 0.60 (kg) 0.60 (kg) 0.60 (kg) 0.60 (kg) 0.60 (kg)

20

Serrated Tool Bodies

101 103

G

20

Basic / Eco Slides

101 103

20

H

Flex Slides

101 103

I

J

K

B10-M: 12-15

B10-G: 20-21

B10-G: 16-19

B10-H

B10: vi-vii

Key on B10-G: 1

Inserts sold separately = Imperial (in) = Metric (mm)

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-G: 10

www.alliedmachine.com | 1.330.343.4283

BORING | Large Diameter Boring

538 (537) Cassettes with 3E TECH+ Diameter Range: 3.937" - 128.150" (100.00 mm - 3255.00 mm)

A

A

85.6 mm

2.0 mm Hub

B

30 mm

C

Form 101

Form 20

D

Boring Range

Part No.

Slide Type

A

Weight

Insert Form Insert Holder

Clamping Pieces

Cassette 538052 538052 538052 538052 538052 538052 538052 538052 538052 537052 537052 537052 537052 537052 537052 537052 537052 537052

210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064

137026 137026 137026 137027 137027 137027 137019 137019 137019 137026 137026 137026 137027 137027 137027 137019 137019 137019

3.937 - 8.071 3.937 - 8.071 3.937 - 8.071 7.874 - 40.157 7.874 - 40.157 7.874 - 40.157 19.685 - 128.150 19.685 - 128.150 19.685 - 128.150 100.00 - 205.00 100.00 - 205.00 100.00 - 205.00 200.00 - 1020.00 200.00 - 1020.00 200.00 - 1020.00 500.00 - 3255.00 500.00 - 3255.00 500.00 - 3255.00

1.323 (lbs) 1.323 (lbs) 1.323 (lbs) 1.323 (lbs) 1.323 (lbs) 1.323 (lbs) 1.323 (lbs) 1.323 (lbs) 1.323 (lbs)

20

Serrated Tool Bodies

101 103

E

20

Basic / Eco Slides

101 103

20

F

Flex Slides

101 103

0.60 (kg) 0.60 (kg) 0.60 (kg) 0.60 (kg) 0.60 (kg) 0.60 (kg) 0.60 (kg) 0.60 (kg) 0.60 (kg)

20

Serrated Tool Bodies

101 103

G

20

Basic / Eco Slides

101 103

20

H

Flex Slides

101 103

I

3E TECH+ Digital Readout Module Part No. 536016 NOTE : WEEE-Reg.-Nr. DE 15820388 *Charging unit sold separately Charging Unit* 536015

J

NOTE: 3E TECH+ adjustment accuracy of 0.0001" or 0.001 mm on diameter

K

B10-M: 12-15

B10-G: 20-21

B10-G: 16-19

B10-H

B10: vi-vii

Key on B10-G: 1

Inserts sold separately = Imperial (in) = Metric (mm)

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-G: 11

BORING | Large Diameter Boring

Insert Holders for Rough Machining

A

B

90° Insert Holders Insert Holder

Insert Form

K

X 1

Weight

ISO Code CC..09T3.. CC..1204.. CC..1204.. CC..1605.. CC..09T3.. CC..1204.. CC..1204.. CC..1605..

Part No. 149090 149099 149083 149093 149090 149099 149083 149093

90° 1.180 1.322 (lbs) 90° 1.180 1.322 (lbs) 90° 1.150 1.322 (lbs) 90° 1.180 1.322 (lbs) 90° 30.00 0.60 (kg) 90° 30.00 0.60 (kg) 90° 29.30 0.60 (kg) 90° 30.00 0.60 (kg)

103 104 104 105 103 104 104 105

C

K

X 1

D

E

90° Tangential Insert Holders Insert Holder

F

K

K

X 1

Weight

ISO Code Tangential Tangential Tangential Tangential

Insert Form

Part No. 149010 149020 149010 149020

90° 90° 90° 90°

1.180 1.322 (lbs) 1.150 1.322 (lbs) 30.00 0.60 (kg) 29.30 0.60 (kg)

05 05 05 05

X 1

G

H

80° Insert Holders Insert Holder

I

K

X 1

Weight

ISO Code SC..1204.. SC..150512 SN..1506.. SC..1204.. SC..150512 SN..1506..

Insert Form

Part No. 149089 149094 149096 149089 149094 149096

K

80° 80° 80° 80° 80° 80°

1.180 1.322 (lbs) 1.180 1.322 (lbs) 1.180 1.322 (lbs) 30.00 0.60 (kg) 30.00 0.60 (kg) 30.00 0.60 (kg)

113 114 134 113 114 134

X 1

J

K

B10-M: 12-15

B10-G: 22-25

B10-H

B10: vi-vii

Key on B10-G: 1

Inserts sold separately = Imperial (in) = Metric (mm)

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-G: 12

www.alliedmachine.com | 1.330.343.4283

BORING | Large Diameter Boring

Insert Holders for Rough Machining | Boring Range Example

A

Chamfering Insert Holders Insert Holder

A 1

A

W

Insert Form

Part No.

45°

B

K X 1 ISO Code 15° 1.180 +0.275 0.157 1.322 (lbs) TC..16T3.. 20° 1.180 +0.354 0.208 1.322 (lbs) TC..16T3.. 30° 1.180 +0.551 0.303 1.322 (lbs) TC..16T3.. 45° 1.180 +0.787 0.389 1.322 (lbs) SC..1505.. A / A 1 W Weight

201065 201025 201075 201015 201065 201025 201075 201015

163 163 163 114 163 163 163 114

X 1

K

C

W

15° 30.00 +7.00 4.00 0.60 (kg) 20° 30.00 +9.00 5.30 0.60 (kg) 30° 30.00 +14.00 7.70 0.60 (kg) 45° 30.00 +20.00 9.90 0.60 (kg)

TC..16T3.. TC..16T3.. TC..16T3.. SC..1505..

X 1

K

D

Back-Boring Insert Holders Insert Holder

A

Insert Form

E

K X 1

X 2

A

Weight

ISO Code

Part No. 251010 251011 251010 251011

90° 3.540 0.196 +1.574 1.763 (lbs) CC..1204.. 90° 3.540 0.196 +2.952 1.984 (lbs) CC..1204..

104 104 104 104

X 1

90° 30.00 5.00 +40.00 0.80 (kg) 90° 30.00 5.00 +75.00 0.90 (kg)

CC..1204.. CC..1204..

F

X 2

K

K

A

OD Turning Insert Holders Insert Holder

G

Insert Form

K X 1

L 1

A

Weight

ISO Code

Part No. 149040

L 1

90° 198.400 2.440 -1.968 2.204 (lbs) CC..1204..

104

X 1

149040

90° 90.00 62.00 -50.00 1.00 (kg)

CC..1204..

104

H

Boring Range Example

Serrated Slide

Insert Holder

Modified Bore Range

Total Bore Range

I

Part No. 350051 350051 350051

Bore Range

Part No.

7.874 - 11.023 201065 7.874 - 11.023 251010 7.874 - 11.023 149040

+0.280 8.150 - 11.300 +1.600 9.450 - 12.600

-2.000

5.900 - 9.055

J

349051 200.00 - 280.00 201065 349051 200.00 - 280.00 251010 349051 200.00 - 280.00 149040

+7.00 207.00 - 287.00 +40.00 240.00 - 320.00

-50.00 150.00 - 230.00 NOTE : Boring range for serrated slides or base slides are found on pg. B10-G: 4 - 7 NOTE : Additional insert holders available upon request

K

B10-M: 12-15

B10-G: 22-25

B10-H

B10: vi-vii

Key on B10-G: 1

Inserts sold separately = Imperial (in) = Metric (mm)

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-G: 13

BORING | Large Diameter Boring

Insert Holders for Height Adjustments and Axial Grooving

A

2

+0.9

3

1

-0.5

B

30 mm

4

Insert Form 103

1 Support

2 Insert Holder

3 Adjusting Screw

4 Fixing Screw

C

Boring Range 7.874 - 128.150

Part No. 149055

Insert Form Part No.

Part No. 315355

Service Key

Part No. 070369

Service Key

103

149058

s6 / B

s6 / B

200.00 - 3255.00

149055

103

149058

315355

s6 / B

070369

s6 / B

D

NOTE: Adjusting and fixing screws will be received with support block.

2

+0.9

3

1

-0.5

E

30 mm

4

Insert Form 104

1 Support

2 Insert Holder

3 Adjusting Screw

4 Fixing Screw

F

Boring Range 7.874 - 128.150

Part No. 149055

Insert Form Part No.

Part No. 315355

Service Key

Part No. 070369

Service Key

104

149056

s6 / B

s6 / B

200.00 - 3255.00

149055

104

149056

315355

s6 / B

070369

s6 / B

G

NOTE: Adjusting and fixing screws will be received with support block.

2

+0.9

3

1

H

-0.5

30 mm

4

Insert Form 05

1 Support

2 Insert Holder

3 Adjusting Screw

4 Fixing Screw

I

Boring Range 7.874 - 128.150

Part No. 149055

Insert Form Part No.

Part No. 315355

Service Key

Part No. 070369

Service Key

05

149085

s6 / B

s6 / B

200.00 - 3255.00

149055

05

149085

315355

s6 / B

070369

s6 / B

NOTE: Adjusting and fixing screws will be received with support block.

J

Insert Holders for Axial Grooving 1 Support

+0.4

1

2 Insert Holder Part No.

-0.4

K

Insert Holder

Part No. 226014

Weight

Insert Form

40 mm

1.574

226031 0.661 (lbs)

304

Inserts sold separately = Imperial (in) = Metric (mm)

40.00

226014

226031 0.30 (kg)

304

2

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-G: 14

www.alliedmachine.com | 1.330.343.4283

BORING | Large Diameter Boring

MVS Holding Arbors

A

L 1

X 1

D 6

B

D 1

D 8

D 2

D 5

C

B 1

D

MVS Connection

Holding Arbor

Holding Arbor Connection D 40 Alu-Line

D 2 | D 1 80 - 36 80 - 36 100 - 56 100 - 56 100 - 56 80 - 36 80 - 36 100 - 56 100 - 56 100 - 56

X 1

L 1

D 5

D 6

D 8

B 1

Weight

Part No.

309001 (1)(2) 209060 (1) 309041 (2) 209043 309043 (2) 309001 (1)(2) 209060 (1) 309041 (2) 209043 309043 (2)

0.748 2.362 1.181 2.362 2.362 19.00 60.00 30.00 60.00 60.00

1.181 1.574 1.181 1.575 1.575 30.00 40.00 30.00 40.00 40.00

1.575 2.362 1.575 2.362 2.362 40.00 60.00 40.00 60.00 60.00

3.503 5.082 3.503 5.082 5.082

2.625 4.000 2.625 4.000 4.000

3.150 1.102 (lbs) 4.921 9.038 (lbs) 3.149 2.204 (lbs) 4.921 13.880 (lbs) 4.921 4.850 (lbs)

E

D 60

D 40 Alu-Line

D 60

D 60 Alu-Line

D 40 Alu-Line

89.00

66.70

80.00 0.50 (kg)

F

D 60

129.10

101.60 125.00 4.10 (kg)

D 40 Alu-Line

89.00

66.70

80.00 1.00 (kg)

D 60

129.10 129.10

101.60 125.00 6.30 (kg) 101.60 125.00 2.20 (kg)

D 60 Alu-Line

G

(1) For light machining only (2) Lightweight aluminum construction only in connection with our serrated slides Basic D 40 Serrated Slides: Ø 7.874" - 20.472" (200.00 - 520.00 mm) (Page B10-E: 4) Basic D 60 Serrated Slides: Ø 7.874" - 19.882" (200.00 - 505.00 mm) (Page B10-E: 5)

H

I

J

K

B10-M: 12-15

B10: vi-vii

Key on B10-G: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-G: 15

BORING | Large Diameter Boring

Master Shanks D 40 / D 60 HSK-A (DIN 69 893) Shanks

A

X 1

L 1

B 1

D 6

B

D 5

D 8

C

HSK-A (DIN 69 893) Shanks

D

Shank

Taper Size

Connection

X 1

L 1

D 5

D 6

D 8

B 1

Weight

Part No. 358015 258021 258061 258098 358015 258021 258061 258098

63

D 40 D 40 D 60 D 60 D 40 D 40 D 60 D 60

2.362 2.362 2.756 2.756 60.00 60.00 70.00 70.00

1.181 1.181 1.575 1.575 30.00 30.00 40.00 40.00

1.575 1.575 2.362 2.362 40.00 40.00 60.00 60.00

3.504 3.504 5.083 5.083 89.00 89.00

2.626 2.626 4.000 4.000 66.70 66.70

3.150 4.200 (lbs) 3.150 7.900 (lbs) 4.921 11.500 (lbs) 4.331 11.000 (lbs)

E

100 100 100

63

80.00 80.00

1.90 (kg) 3.60 (kg)

100 100 100

F

129.10 129.10

101.60 101.60

125.00 5.20 (kg) 110.00 5.00 (kg)

G

H

I

J

K

B10-M: 12-15

B10: vi-vii

Key on B10-G: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-G: 16

www.alliedmachine.com | 1.330.343.4283

BORING | Large Diameter Boring

Master Shanks D 40 / D 60 CAT 40 / 50 Shanks with Imperial Threads | CAT 50 Shank with Metric Threads

A

X 1

L 1

B 1

D 6

B

D 5

D 8

C

CAT 40 / 50 Shanks with Imperial Threads

D

Shank

Taper Size

Connection

X 1

L 1

D 5

D 6

D 8

B 1

Weight

Part No. 357004 357001 357002 357003

40 50 50 50

D 40 D 40 D 60 D 60

1.970 1.970 2.756 2.756

1.181 1.181 1.575 1.575

1.575 1.575 2.362 2.362

3.504 3.504 5.083 5.083

2.626 2.626 4.000 4.000

3.150 3.150

4.000 (lbs) 8.400 (lbs)

E

4.331 11.700 (lbs) 4.921 12.100 (lbs)

F

G

X 1

B 1

D 6

L 1

D 5

H

D 8

I

CAT 50 Shanks with Metric Threads

Shank

Taper Size

Connection

X 1

L 1

D 5

D 6

D 8

B 1

Weight 4.60 (kg)

Part No. 326083

J

50

D 40

60.00

30.00

40.00

89.00

66.70

80.00

K

B10-M: 12-15

B10: vi-vii

Key on B10-G: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-G: 17

Made with FlippingBook flipbook maker