B10-D_US-EN

BORING | Rough Machining

VolCut Insert Holders Diameter Range: 2.559" - 128.150" (65.00 mm - 3255.00 mm)

A

X 1

X 2

B

D 2 D 1

A

C

Radial Offset 0.157" - 0.196" 4.00 mm - 5.00 mm

D

D 5 D 2 D 1

E

F

Serrated Bodies with VolCut Insert Holders Connection Boring Range

Serrated Body

Part No.

Number of Inserts

Insert Form

D 2 | D 1 50 - 28 63 - 36 80 - 36 80 - 36 80 - 36

Weight

VolCut Insert Holder Serrated Body

A

A min **

X 1

X 2

D 5

151019 151039 151059 151069 151069 149030 151019 151039 151059 151069 151069 149030

148005 148006 148007 148007 148009 148005 148006 148007 148007 148009 *

2.559 - 3.268 3.228 - 4.055 3.937 - 5.118 4.921 - 6.102 5.906 - 8.071 7.874 - 128.150

2.559 - 2.756 2.913 2.165 - 2.425 (lbs) 3.228 - 3.425 3.504 2.362 - 4.850 (lbs) 3.937 - 4.134 3.504 2.362 - 6.613 (lbs) 4.921 - 5.118 3.504 2.362 - 7.054 (lbs) 5.906 - 6.102 3.504 2.362 4.921 11.243 (lbs)

2 3 3 3 3 3 2 3

464 464 464 464 464 464 464 464 464 464 464 464

G

D60

-

-

-

-

-

H

50 - 28 63 - 36

65.00 - 83.00

65.00 - 70.00 74.00 55.00 - 1.10 (kg)

82.00 - 103.00 82.00 - 87.00 89.00 60.00 - 2.20 (kg)

80 - 36 100.00 - 130.00 100.00 - 105.00 89.00 60.00 - 3.00 (kg) 3 80 - 36 125.00 - 155.00 125.00 - 130.00 89.00 60.00 - 3.20 (kg) 3 80 - 36 150.00 - 205.00 150.00 - 155.00 89.00 60.00 125.00 5.10 (kg) 3

I

*

D60

200.00 - 3255.00

-

-

-

-

-

3

NOTE : Inserts, insert holders, and serrated body are sold separately. *For large diameter serrated slides, please contact Application Eng. (330.343.4283 ext: 7611) and see section B10-G in the Wohlhaupter® MultiBore® System Tools catalog. **For smaller diameters, both cartridges must be set to the same diameter. Only the outside insert on each cartridge can be engaged in the material.

J

IC Inserts

Part No.

K

Carbide Grade

Geometry Standard Standard Standard High Rake

AM300®

WSP-Screw

OP-05T308-P OP-05T308-1P OP-05T308-2P OP-05T308-PHR

P35 (C5) K35 (C1) K20 (C2) P35 (C5)

IS-10-1 IS-10-1 IS-10-1 IS-10-1

L

NOTE: See section A70 in the Allied Master Product Catalog for recommended cutting data, cutting materials, and geometries.

A70: 16 - 19

B10: vi-vii

M

Key on B10-D: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Imperial (in) = Metric (mm)

For large diameter boring with VolCut insert holders please: - Contact our Application Engineering department before purchasing (330.343.4283 ext: 7611 | email: appeng@alliedmachine.com) - Refer to section B10-G in the Wohlhaupter® MultiBore® System Tools catalog. WARNING

INDEX

B10-D: 22

www.alliedmachine.com | 1.330.343.4283

Made with FlippingBook flipbook maker