Special Tooling Catalog

SPECIALS |

® : Solid Carbide and PCD Tools

Recommended Drilling Data | Imperial (in)

SUPERION SOLID CARBIDE

Feed Rate (IPR) by Diameter 0.197 - 0.236 0.236 - 0.276 0.276 - 0.315 0.315 - 0.394 0.394 - 0.472 0.472 - 0.551 0.551 - 0.630 0.630 - 0.709 0.709 - 0.787 0.0090 0.0110 0.0120 0.0140 0.0155 0.0170 0.0190 0.0205 0.0220 0.0085 0.0100 0.0115 0.0130 0.0140 0.0155 0.0165 0.0185 0.0210 0.0080 0.0090 0.0110 0.0120 0.0130 0.0140 0.0150 0.0170 0.0190 0.0080 0.0090 0.0110 0.0120 0.0130 0.0140 0.0150 0.0170 0.0190 0.0075 0.0085 0.0100 0.0115 0.0125 0.0135 0.0145 0.0155 0.0170 0.0100 0.0120 0.0130 0.0155 0.0165 0.0185 0.0200 0.0220 0.0240 0.0095 0.0110 0.0125 0.0145 0.0155 0.0165 0.0175 0.0195 0.0220 0.0090 0.0100 0.0120 0.0130 0.0140 0.0150 0.0160 0.0180 0.0200 0.0090 0.0100 0.0120 0.0130 0.0140 0.0150 0.0160 0.0180 0.0200 0.0085 0.0095 0.0115 0.0125 0.0135 0.0145 0.0155 0.0165 0.0190 0.0090 0.0100 0.0125 0.0145 0.0160 0.0180 0.0195 0.0200 0.0220 0.0085 0.0090 0.0115 0.0135 0.0155 0.0170 0.0185 0.0190 0.0210 0.0095 0.0110 0.0125 0.0145 0.0170 0.0185 0.0200 0.0210 0.0230 0.0085 0.0100 0.0115 0.0135 0.0155 0.0175 0.0190 0.0200 0.0220 0.0060 0.0070 0.0080 0.0090 0.0100 0.0120 0.0130 0.0140 0.0150 0.0050 0.0060 0.0065 0.0070 0.0080 0.0100 0.0110 0.0120 0.0140 0.0070 0.0090 0.0100 0.0115 0.0125 0.0140 0.0160 0.0170 0.0180 0.0030 0.0030 0.0030 0.0040 0.0040 0.0040 0.0050 0.0060 0.0070 0.0035 0.0040 0.0045 0.0055 0.0060 0.0065 0.0070 0.0075 0.0085 0.0030 0.0035 0.0035 0.0045 0.0050 0.0060 0.0065 0.0065 0.0075 0.0035 0.0040 0.0045 0.0060 0.0060 0.0070 0.0075 0.0080 0.0090 0.0030 0.0035 0.0040 0.0050 0.0055 0.0060 0.0070 0.0070 0.0080 0.0035 0.0040 0.0040 0.0045 0.0055 0.0060 0.0065 0.0070 0.0080 0.0030 0.0035 0.0035 0.0040 0.0045 0.0055 0.0060 0.0060 0.0070 0.0020 0.0030 0.0030 0.0040 0.0050 0.0055 0.0070 0.0080 0.0090 0.0020 0.0030 0.0030 0.0040 0.0040 0.0045 0.0060 0.0070 0.0080 0.0020 0.0030 0.0030 0.0040 0.0040 0.0045 0.0060 0.0070 0.0080 0.0020 0.0030 0.0030 0.0040 0.0050 0.0055 0.0070 0.0080 0.0090 0.0020 0.0030 0.0030 0.0040 0.0040 0.0045 0.0060 0.0070 0.0080

X10

NOTE: The speeds and feeds listed above are for solid carbide tooling only. These are not recommendations for any polycrystalline diamond tools.

www.alliedmachine.com | 1.330.343.4283

X10: 16