AMPC_US-EN

GEN3SYS® XT and XT Pro Drilling System Contents

Reference Icons The following icons will appear throughout the catalog to help you navigate between products.

Introduction Information Why You Should Use the Pro . . . . . . . . . . . . . . . 2 - 3 Test Results and Case Study . . . . . . . . . . . . . . . 4 - 5

Setup / Assembly Information Detailed instructions and information regarding the corresponding part(s)

GEN3SYS XT Pro Drilling System Information . . . . . . . . . . . . . . . . . 6 GEN3SYS XT Drilling System Information . . . . . . . . . . . . . . . . . 7 Insert Comparison and Assembly Details . . . . . . . . . . . . . . . . . 8 Holder Comparison and Overview . . . . . . . . . . . . . . . . . 9 Product Nomenclature . . . . . . . . . . . . . . 10 - 11

Recommended Cutting Data Speed and feed recommendations for optimum and safe boring

Coolant-Through Option Indicates that the product is coolant through

Drill Series 11 Series . . . . . . . . . . . . . . 12 - 15 12 Series . . . . . . . . . . . . . . 16 - 19 13 Series . . . . . . . . . . . . . . 20 - 23 14 Series . . . . . . . . . . . . . . 24 - 27 15 Series . . . . . . . . . . . . . . 28 - 31 16 Series . . . . . . . . . . . . . . 32 - 35 17 Series . . . . . . . . . . . . . . 36 - 39 18 Series . . . . . . . . . . . . . . 40 - 43 20 Series . . . . . . . . . . . . . . 44 - 47 22 Series . . . . . . . . . . . . . . 48 - 51 24 Series . . . . . . . . . . . . . . 52 - 55 26 Series . . . . . . . . . . . . . . 56 - 59 29 Series . . . . . . . . . . . . . . 60 - 63 32 Series . . . . . . . . . . . . . . 64 - 67

Diameter Range

Series

Imperial (inch) 0.4331 - 0.4723 0.4724 - 0.5117 0.5118 - 0.5511 0.5512 - 0.5905 0.5906 - 0.6298 0.6299 - 0.6692 0.6693 - 0.7086 0.7087 - 0.7873 0.7874 - 0.8660 0.8661 - 0.9448 0.9449 - 1.0235 1.0236 - 1.1416 1.1417 - 1.2597 1.2598 - 1.3780

Metric (mm) 11.00 - 11.99 12.00 - 12.99 13.00 - 13.99 14.00 - 14.99 15.00 - 15.99 16.00 - 16.99 17.00 - 17.99 18.00 - 19.99 20.00 - 21.99 22.00 - 23.99 24.00 - 25.99 26.00 - 28.99 29.00 - 31.99 32.00 - 35.00

11 12 13 14 15 16 17 18 20 22 24 26 29 32

Recommended Cutting Data Imperial (inch)

GEN3SYS XT Pro . . . . . . . . . . . . . . 68 - 71 GEN3SYS XT . . . . . . . . . . . . . . 72 - 75

GEN3SYS XT Pro . . . . . . . . . . . . . . 76 - 79 GEN3SYS XT . . . . . . . . . . . . . . 80 - 83

Metric (mm)

Tap Drill Conversions . . . . . . . . . . . . . . 84 - 85 Deep Hole Drilling Guidelines . . . . . . . . . . . . . . . . . 86 Troubleshooting Guide . . . . . . . . . . . . . . . . . 87

A20: 1

Made with FlippingBook Online newsletter