B10-F_EU-EN

Wohlhaupter® Master Shanks

Drilling

Reaming

Burnishing

Threading

Wohlhaupter ® BORING Master Shanks with MVS Connection

Specials

S E C T I O N B10-F Master Shanks with MVS Connection

Wohlhaupter ® Master Shanks with MVS Connection

The MVS Connection Wohlhaupter MVS connection shanks provide a high level of accuracy when building or replacing components. Our master shanks adapt to any machine tool spindle, making it easy to find the shank you need.

Your safety and the safety of others is very important. This catalogue contains important safety messages. Always read and follow all safety precautions. This triangle is a safety hazard symbol. It alerts you to potential safety hazards that can cause tool failure and serious injury. When you see this symbol in the catalogue, look for a related safety message that may be near this triangle or referred to in the nearby text. There are safety signal words also used in the catalogue. Safety messages follow these words. WARNING (shown above) means that failure to follow the precautions in this message could result in tool failure and serious injury. NOTICE means that failure to follow the precautions in this message could result in damage to the tool or machine but not result in personal injury. NOTE and IMPORTANT are also used. These are important that you read and follow but are not safety-related. Visit www.alliedmachine.com for the most up-to-date information and procedures. WARNING

Applicable Industries

Aerospace Agriculture

Automotive

Firearms

General Machining

Oil & Gas

Renewable Energy

Master Shanks with MVS Connection Table of Contents

Reference Icons The following icons will appear throughout the catalogue to help you navigate between products.

248 Shanks . . . . . . . . . . . . . . . . . 2

MVS Connection Colour Guide Detailed instructions and information regarding the MVS connection(s) Recommended Cutting Data Speed and feed recommendations for optimum and safe boring

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

Carbide Shanks . . . . . . . . . . . . . . . . . 3

25-14 32-18

HSK Shanks (DIN 69893) . . . . . . . . . . . . . . . . . 4

Polygon Shaft Shanks (PSC) (ISO26623-1) . . . . . . . . . . . . . . . . . 5

Clamping Elements Collet chucks for carbide shanks

CAT Shanks with Metric Threads . . . . . . . . . . . . . . . . . 6

Dual Contact SK Shanks (DIN 69871-AD / B-D) . . . . . . . . . . . . . . . . . 7

Through Coolant Option Indicates that the product is through coolant

SK Shanks (DIN 69871-AD / B-D) . . . . . . . . . . . . . . . . 8

Dual Contact BT Shanks (JIS B 6339) . . . . . . . . . . . . . . . . 9

BT Shanks (JIS B 6339) . . . . . . . . . . . . . . . . 10

NMTB Shanks . . . . . . . . . . . . . . . . 11

DIN 2080 Shanks . . . . . . . . . . . . . . . . 12

Morse Taper Shanks (DIN 1806) & R8 Shanks . . . . . . . . . . . . . . . . 13

Accessories . . . . . . . . . . . . . . 14 - 15

Mounting Fixtures . . . . . . . . . . . . . . . . 16

B10-F: 1

BORING | Master Shanks with MVS Connection

248 Shanks Steel | Carbide

A

L 1

L 3

B

D 1

M8 x 1

C

Steel Shanks

Shank

L 3 min *

Connection

D 1

L 1

L 3 max* 37.00 52.00 69.00

SK 40+50

HSK-A 63

HSK-A 100

Weight 0.10 (kg) 0.20 (kg) 0.40 (kg)

Part No. 248136 248137 248138

D

M8 x 1 M8 x 1 M8 x 1

15.00 18.00 23.00

85.00

- - -

-

-

100.00 117.00

5.00

12.00 29.00

22.00

* L 3 dimensions apply to collet chucks

E

L 1

L 3

F

D 1

M8 x 1

G

Carbide Shanks

H

Shank

L 3 min*

Connection

D 1

L 1

L 3 max* 82.00 107.00 132.00 194.00

SK 40 20.00 39.00 64.00

SK 50 20.00 21.00 46.00

HSK-A 63

HSK-A 100

Weight 0.30 (kg) 0.60 (kg) 1.10 (kg) 1.40 (kg)

Part No. 248142 248143 248144 248145

M8 x 1 M8 x 1 M8 x 1 M8 x 1

15.00 18.00 23.00 23.00

130.00 155.00 180.00 242.00

35.00 60.00 85.00

42.00 67.00 92.00

I

126.00

108.00

147.00

154.00

* L 3 dimensions apply to collet chucks

J

K

B10-M: 12-13

B10-A: 30

B10: VI-VII

Key on B10-A: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm )

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) -When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal reducers, do not exceed recommended 8xD length-to-diameter ratio -When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING

M

INDEX

B10-F: 2

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

BORING | Master Shanks with MVS Connection

Carbide Master Shanks

A

L 1

L 3

B

D 3

D 4

D 1

C

D

Connection

Shank

L 3 min

D 4 | D 3 18 - 11 22 - 11 22 - 11 22 - 11 25 - 14 25 - 14 32 - 18 32 - 18 40 - 22

L 1

D 1

L 3 max

SK 40 39.00 28.00 74.00

SK 50 26.00 28.00 56.00 97.00 36.00 81.00

HSK-A 63

HSK-A 100

Weight 0.50 (kg) 0.70 (kg) 0.90 (kg) 1.10 (kg) 1.00 (kg) 1.30 (kg) 2.10 (kg) 2.60 (kg) 5.20 (kg)

Part No. 299009* 299001* 299002* 299003* 299004* 299005* 299006** 299007** 299008**

155.00 140.00 190.00 231.00 165.00 215.00 210.00 260.00 415.00

18.00 22.00 22.00 22.00 25.00 25.00 32.00 32.00 40.00

107.00

60.00 45.00 95.00

67.00 52.00

92.00

E

142.00 183.00 117.00 167.00

102.00 143.00

115.00

136.00

49.00 99.00

70.00

77.00

120.00 139.00 189.00

127.00 137.00 187.00 333.00

- - -

136.00 186.00

136.00 186.00 333.00

F

-

-

NOTE : Adapter shanks are used for extensions up to 10xD * Recommended clamping element: collet chuck ISO 15488 (DIN 6499-B) (pg. B10-I: 5) **Recommended clamping element: collet chuck ISO 10897 (DIN 6388) (pg. B10-I: 5)

G

H

I

J

K

B10-M: 12-13

B10: VI-VII

B10-I: 5

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm )

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) -When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal reducers, do not exceed recommended 8xD length-to-diameter ratio -When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING

M

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-F: 3

BORING | Master Shanks with MVS Connection

HSK Master Shanks (DIN 69893) Balanced

A

X 1

L 1

B

D 3 D 4 D 5

D 3 D 4

D

X 1*

C

L 1

D 5

D

D

*X 1 : with one piece clamping nut

L 2

E

Taper Size

Connection

Shank

D

D 4 | D 3 40 - 22 50 - 28 40 - 22 50 - 28 25 - 14 32 - 18 40 - 22 50 - 28 63 - 36 80 - 36 50 - 28 50 - 28 50 - 28* 63 - 36 63 - 36 63 - 36 80 - 36 80 - 36 80 - 36 ER 40

X 1

L 1

L 2

D 5

Weight 0.40 (kg) 0.70 (kg) 0.60 (kg) 0.80 (kg) 0.70 (kg) 0.80 (kg) 0.80 (kg) 1.10 (kg) 1.50 (kg) 2.10 (kg) 1.70 (kg) 2.40 (kg) 5.00 (kg) 4.00 (kg) 2.90 (kg) 7.80 (kg) 7.80 (kg) 3.70 (kg) 12.60 (kg) 10.40 (kg) 5.00 (kg) 17.50 (kg) 3.50 (kg)

Part No. 246016 246004 246015 245011 246012 246013 246014 245012 245013 246009 245014 246020 246021 245015 246019 246022 245016 246018 246023 246010 246017 252090** 252091 **

40 40 50 50 63 63 63 63 63 63 63

56.00 70.00 56.00 65.00 46.00 56.00 56.00 65.00 80.00 80.00

- -

- - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - -

30.00

F

-

20.00 30.00 30.00 39.00

G

- -

120.00

94.00 36.00

95.00

63.00

100 100 100 100 100 100 100 100 100 100 100 100

65.00

-

180.00 180.00

151.00 151.00

60.00

H

- -

80.00

51.00

205.00 205.00

176.00 176.00

78.00

- -

80.00

51.00

255.00 255.00 100.00 300.00 120.00

226.00 226.00

90.00

I

- - -

100 - 56 100 - 56

-

221.00

ER 40

91.00

88.00

63.00

NOTE : Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg * D 4 = 49.50 mm **Balanced without clamping nut

J

K

B10-M: 12-13

B10: VI-VII

Key on B10-A: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm )

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) -When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal reducers, do not exceed recommended 8xD length-to-diameter ratio -When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING

M

INDEX

B10-F: 4

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

BORING | Master Shanks with MVS Connection

Polygon Shaft Master Shanks (PSC) (ISO 26623-1) Balanced

A

X 1

L 1

B

D 3 D 4

D

C

D

PSC

Connection

Shank

D

D 4 | D 3 40 - 22 50 - 28 63 - 36 80 - 36 25 - 14 32 - 18 40 - 22 50 - 28 63 - 36 80 - 36 50 - 28 63 - 36 80 - 36

X 1

L 1

Weight 0.70 (kg) 1.00 (kg) 1.50 (kg) 2.50 (kg) 0.90 (kg) 1.00 (kg) 1.10 (kg) 1.30 (kg) 1.80 (kg) 2.60 (kg) 2.20 (kg) 2.60 (kg) 3.30 (kg)

Part No. 227014 227001 227002 227012 227010 227009 227008 227003 227004 227005 227011 227006 227007

50 50 50 50 63 63 63 63 63 63 80 80 80

54.00 65.00 80.00 80.00 54.00 54.00 65.00 65.00 80.00 80.00 65.00 80.00 80.00

31.10

- - -

E

21.10 23.00 36.40 39.00

F

- -

25.00 45.10

G

-

NOTE : Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg

H

I

J

K

B10-M: 12-13

B10: VI-VII

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm )

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) -When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal reducers, do not exceed recommended 8xD length-to-diameter ratio -When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING

M

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-F: 5

BORING | Master Shanks with MVS Connection

CAT Master Shanks with Metric Threads

A

X 1

L 1

L 2

B

D 4 D 9

D 10

D 3

C

D

Connection

Shank

Taper Size

D 4 | D 3 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56

X 1

L 1

L 2

D 9

D 10

Weight 1.30 (kg) 1.80 (kg) 3.40 (kg) 3.70 (kg) 4.20 (kg) 5.20 (kg)

Part No.

132022T016960 132066T016960 132022T016962 132066T016962 132088T016962 132076T016962

40 40 50 50 50 50

62.00 82.00 62.00 72.00 72.00

42.90 62.90 42.90 52.90 52.90 85.90

- -

44.45 44.45 69.85 69.85 69.85 69.85

M16 x 2 M16 x 2 M24 x 3 M24 x 3 M24 x 3 M24 x 3

E

27.00 37.00

- -

105.00

F

G

H

I

J

K

B10-M: 12-13

B10: VI-VII

Key on B10-A: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm )

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) -When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal reducers, do not exceed recommended 8xD length-to-diameter ratio -When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING

M

INDEX

B10-F: 6

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

BORING | Master Shanks with MVS Connection

Dual Contact SK Master Shanks (DIN 69871-AD / B-D)

A

X 1

L 1

B

D 4

D 10

D 3

C

D

Connection

Shank

Taper Size

D 4 | D 3 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56

X 1

L 1

D 10

Weight 1.10 (kg) 1.50 (kg) 2.90 (kg) 3.20 (kg) 3.70 (kg) 5.30 (kg)

Part No. 353064 353065 353066 353067 353068 353069

40 40 50 50 50 50

46.00 66.00 46.00 56.00 56.00 90.00

26.90 46.90 26.90 36.90 36.90 70.90

M16 x 2 M16 x 2 M24 x 3 M24 x 3 M24 x 3 M24 x 3

E

F

G

H

I

J

K

B10-M: 12-13

B10: VI-VII

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm )

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) -When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal reducers, do not exceed recommended 8xD length-to-diameter ratio -When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING

M

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-F: 7

BORING | Master Shanks with MVS Connection

SK Master Shanks (DIN 69871-AD / B-D) Balanced

A

X 1*

X 1

L 1

L 1

D 3 D 4 D 5

D

D 5

B

10

D 3 D 4

L 2

*X 1 : with one piece clamping nut

C

D

Connection

Shank

Taper Size

D 4 | D 3 40 - 22 50 - 28 32 - 18 40 - 22 50 - 28 63 - 36 80 - 36 50 - 28 50 - 28 50 - 28* 63 - 36 63 - 36 63 - 36 80 - 36 80 - 36 ER 40

X 1

L 1

L 2

D 5

D 10

Weight

Part No. 327001 327002 327003 327004 327005 327006 327007 327017 327025 327033 327018 327026 327034 327010 327027 327011 327028 259079** 259080**

30 30 40 40 40 40 40 40 50 50 50 50 50 50 50 50 50 50 50

46.00 58.00 55.00 46.00 46.00 66.00 66.00 80.00 46.00

26.90 38.90 35.90 26.90 26.90 46.90 46.90 60.90 26.90

- - - - - - - - - - - - - - - - -

- -

M12 x 1.75 0.50 (kg) M12 x 1.75 0.80 (kg)

E

40.00

M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3

1.10 (kg) 1.00 (kg) 1.10 (kg) 1.40 (kg) 1.90 (kg) 1.30 (kg) 2.90 (kg) 6.00 (kg) 4.90 (kg) 3.20 (kg) 8.90 (kg) 6.90 (kg) 3.70 (kg) 13.60 (kg) 5.30 (kg) 17.10 (kg) 3.10 (kg)

- - - -

F

116.00

63.00

-

186.00 186.00

166.90 166.90

60.00

- -

56.00

36.90

G

206.00 206.00

186.90 186.90

78.00

- -

56.00

36.90

256.00

236.90

90.00

100 - 56 100 - 56

90.00

70.90

- -

290.00

270.90

H

ER 40

80.00

55.20

134.00

63.00

NOTE : Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg * D 4 = (49.50 mm) **Balanced without clamping nut

I

J

K

B10-M: 12-13

B10: VI-VII

Key on B10-A: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm )

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) -When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal reducers, do not exceed recommended 8xD length-to-diameter ratio -When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING

M

INDEX

B10-F: 8

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

BORING | Master Shanks with MVS Connection

Dual Contact BT Master Shanks (JIS B 6339)

A

X 1

L 1

B

D 4

D 10

D 3

C

D

Connection

Shank

Taper Size

D 4 | D 3 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56

X 1

L 1

D 10

Weight 1.20 (kg) 1.50 (kg) 4.00 (kg) 4.20 (kg) 4.80 (kg) 5.50 (kg)

Part No. 353070 353071 353072 353073 353074 353075

40 40 50 50 50 50

54.00 64.00 65.00 75.00 75.00 90.00

27.00 37.00 26.80 36.80 36.80 51.80

M16 x 2 M16 x 2 M24 x 3 M24 x 3 M24 x 3 M24 x 3

E

F

G

H

I

J

K

B10-M: 12-13

B10: VI-VII

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm )

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) -When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal reducers, do not exceed recommended 8xD length-to-diameter ratio -When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING

M

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-F: 9

BORING | Master Shanks with MVS Connection

BT Master Shanks (JIS B 6339) Balanced

A

X 1

L 1

B

D 10

D 3 D 4

D 3 D 4 D 5

C

X 1*

L 1

D

D 5

*X 1 : with one piece clamping nut

L 2

E

Connection

Shank

Taper Size

D 4 | D 3 40 - 22 50 - 28 40 - 22 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56 ER 40

X 1

L 1

L 2

D 5

D 10

Weight 0.50 (kg) 0.60 (kg) 1.10 (kg) 1.20 (kg) 1.50 (kg) 1.20 (kg) 3.90 (kg) 4.20 (kg) 4.70 (kg) 5.50 (kg) 3.80 (kg)

Part No. 327012 327013 327016 327019 327020 259081 * 327021 327022 327023 327024 259082*

30 30 40 40 40 40 50 50 50 50 50

40.00 46.00 46.00 54.00 64.00 70.00 65.00 75.00 75.00 90.00 80.00

18.00 24.00 19.00 27.00 37.00 43.00 26.80 36.80 36.80 51.80 41.80

- - - - - - - - -

- - - - - - - - -

M12 x 1.75 M12 x 1.75

F

M16 x 2 M16 x 2 M16 x 2 M16 x 2 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3

104.00

63.00

G

ER 40

135.00

63.00

NOTE : Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg *Balanced without clamping nut

H

I

J

K

B10-M: 12-13

B10: VI-VII

Key on B10-A: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm )

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) -When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal reducers, do not exceed recommended 8xD length-to-diameter ratio -When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING

M

INDEX

B10-F: 10

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

BORING | Master Shanks with MVS Connection

NMTB Master Shanks

A

X 1

L 1

B

D 9

D 3 D 4

C

D

Connection

Shank

Taper Size

D 4 | D 3 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56

X 1

L 1

D 9

Weight 1.30 (kg) 1.50 (kg) 3.00 (kg) 3.50 (kg) 4.00 (kg) 4.90 (kg)

Part No.

5/8 - 11 5/8 - 11

132022T004498 132066T004498 132022T004480 132066T004480 132088T004480 132076T004480

40 40 50 50 50 50

38.00 48.00 42.00 52.00 52.00 90.00

26.40 36.40 26.80 36.80 36.80 74.80

E

1 - 8 1 - 8 1 - 8 1 - 8

F

G

H

I

J

K

B10-M: 12-13

B10: VI-VII

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm )

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) -When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal reducers, do not exceed recommended 8xD length-to-diameter ratio -When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING

M

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-F: 11

BORING | Master Shanks with MVS Connection

DIN 2080 Master Shanks

A

X 1

L 1

B

D 9

D 3 D 4

X 1*

C

L 1

D 5

D 9

D

L 2

*X 1 : with one piece clamping nut

Connection

Shank

E

Taper Size

D 4 | D 3 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56

X 1

L 1

L 2

D 5

D 9

Weight 1.30 (kg) 1.50 (kg) 3.00 (kg) 3.50 (kg) 4.00 (kg) 4.90 (kg) 3.30 (kg)

Part No.

132022T010229 132066T010229 132022T003704 132066T003704 132088T003704 132076T003704

40 40 50 50 50 50 50

38.00 48.00 42.00 52.00 52.00 90.00 80.00

26.40 36.40 26.80 36.80 36.80 74.80 64.80

- - - - - -

- - - - - -

M16 x 2 M16 x 2 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3

F

259084

ER 40

134.00

63.00

G

H

I

J

K

B10-M: 12-13

B10: VI-VII

Key on B10-A: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm )

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) -When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal reducers, do not exceed recommended 8xD length-to-diameter ratio -When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING

M

INDEX

B10-F: 12

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

BORING | Master Shanks with MVS Connection

DIN 1806 Morse Taper Master Shanks | R8 Master Shanks

A

X 1

L 1

B

D 3 D 4

C

DIN 1806 Master Shanks

Connection

Shank

D

Morse Taper Size

D 4 | D 3 50 - 28 50 - 28 63 - 36

X 1

L 1

Weight 1.10 (kg) 1.80 (kg) 2.20 (kg)

Part No.

132022T003590 132022T003920 132066T003920

4 5 5

43.00 33.00 53.00

36.50 26.70 46.70

E

F

X 1 L 1

G

D 3 D 4

7/16 - 20 UNF

H

Connection

Shank

I

D 4 | D 3 50 - 28 63 - 36

X 1

L 1

Weight 1.00 (kg) 1.30 (kg)

Part No.

132022T007166 132066T007166

45.00 60.00

36.00 51.00

J

K

B10-M: 12-13

B10: VI-VII

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm )

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) -When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal reducers, do not exceed recommended 8xD length-to-diameter ratio -When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING

M

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-F: 13

BORING | Master Shanks with MVS Connection

Accessories Coolant Adapter Sets | Service Keys | ISO 15488 (DIN 6499-B) Collet Chuck Accessories

A

Coolant Adapter Sets

B

HSK Shank Size

Thread

Part No. 262002 262003 262004 262005 262006 262007

32 40 50 63 80

M10 x 1.5 x 1.0 M12 x 1.75 x 1.0 M16 x 2 x 1.0 M18 x 2.5 x 1.0 M20 x 2.5 x 1.5 M24 x 3 x 1.5

C

100

D

Service Keys

HSK Shank Size

D

Part No. 315234 315235 215726 215727 * 415127 215728

E

32 40 50 63 80

8.50

10.50 14.50 16.50 18.00 22.00

D

F

100

*Two piece

L 1

G

ISO 15488 (DIN 6499-B) One Piece Clamping Nut

Clamping Nut

H

Nominal Size

L 1

D 1

Part No. 215926

D 1

ER 40

25.50

63.00

I

L 1

ISO 15488 (DIN 6499-B) Sealing Disk Clamping Nut

J

Sealing Disk Clamping Nut

Nominal Size

L 1

D 1

Part No. 278001

ER 40

34.00

63.00

D 1

K

L

M

B10-M: 12-13

B10: VI-VII

Key on B10-A: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm )

INDEX

B10-F: 14

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

BORING | Master Shanks with MVS Connection

Accessories ISO 15488 (DIN 6499-B) Collet Chuck Accessories

A

ISO 15488 (DIN6499-B) Collets Clamping Range

L 1

Collet

B

A

L 1

D 1

Part No. 071790 071793 071795 071798

15.00 - 14.00 18.00 - 17.00 20.00 - 19.00 23.00 - 22.00

46.00 46.00 46.00 46.00

40.00 40.00 40.00 40.00

D 1

A

C

D

ISO 15488 (DIN 6499-B) Service Keys

Service Key

D

E

Nominal Size

D

Part No. 215931

ER 40

63.00

F

ISO 15488 (DIN 6499-B) Sealing Disks Clamping Range

Part No. 278029 278035 278039 278045

G

15.00 - 14.50 18.00 - 17.50 20.00 - 19.50 23.00 - 22.50

H

I

Application with clamping nuts and sealing disks when using central coolant feed:

Clamping Nut

J

Interchangeable Sealing Disk

K

Collet

Adapter Shank (Section A)

248 Boring Tool (Section A) 3.00 mm - 30.20 mm

Twin Cutter (Section D) 19.50 mm - 29.50 mm

L

M

B10-M: 12-13

B10: VI-VII

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm )

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-F: 15

BORING | Master Shanks with MVS Connection

Accessories Mounting Fixtures

A

B

C

D

Mounting Fixture

Code

Type

Part No. 098060 098073 098061 098062 098063 098064 098065 098066 098067 098068 098069 098070 098071

Basic Body*

-

Adapter Adapter Adapter Adapter Adapter Adapter Adapter Adapter Adapter Adapter Adapter Adapter

30 Taper 40 Taper 50 Taper HSK-A 32 HSK-A 40 HSK-A 50 HSK-A 63 HSK-A 80 HSK-A 100

E

F

PSC 50 PSC 63 PSC 80

G

*Basic body and adapters sold separately

H

I

J

K

B10-M: 12-13

B10: VI-VII

Key on B10-A: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm )

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) -When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal reducers, do not exceed recommended 8xD length-to-diameter ratio -When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING

M

INDEX

B10-F: 16

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

BORING | Master Shanks with MVS Connection

Notes

A

B

C

D

E

F

G

H

I

J

K

L

M

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-F: 17

Allied Machine & Engineering

Guaranteed Test / Demo Application Form

Distributor PO #

The following must be filled out completely before your test will be considered

IMPORTANT: For processing, send Purchase Order to your Allied Field Sales Engineer (FSE). Please clearly mark the paperwork as “Test Order.” Distributor Information Company Name: Contact: Account Number: Phone: Email: Current Process List all tooling, coatings, substrates, speeds and feeds, tool life, and any problems you are experiencing End User Information Company Name: Contact: Industry: Phone: Email:

Test Objective

List what would make this a successful test (i.e. penetration rate, finish, tool life, hole size, etc.)

Application Information

Hole Diameter:

in/mm

Tolerance:

Material:

(4150 / A36 / Cast Iron / etc.)

Pre-existing Diameter:

in/mm

Depth of Cut:

in/mm

Hardness:

(BHN / Rc)

Required Finish:

RMS

State:

(Casting / Hot rolled / Forging)

Machine Information

Machine Type:

Builder:

Model #:

(Lathe / Screw machine / Machine center / etc.)

(Haas, Mori Seiki, etc.)

Shank Required:

Power:

HP/KW

(CAT50 / Morse taper, etc.)

Thrust:

lbs/N

Rigidity:

Orientation: Vertical

Tool Rotating: Yes No

Excellent Good Poor

Horizontal

Coolant Information

Coolant Delivery:

Coolant Pressure:

PSI / bar

(Through tool / Flood)

Coolant Type:

Coolant Volume:

GPM / LPM

(Air mist, oil, synthetic, water soluble, etc.)

Requested Tooling QTY Item Number

engineering.eu@alliedmachine.com Allied Machine & Engineering Co. (Europe) Ltd 93 Vantage Point, Pensnett Estate, Kingswinford, DY6 7FR, United Kingdom +44 (0)1384 400 900 www.alliedmachine.com

QTY Item Number

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

Warranty Information

Allied Machine & Engineering (“Allied Machine”) warrants to original equipment manufacturers, distributors, industrial and commercial users of its products for one year from the original date of sale that each new product manufactured or supplied by Allied Machine shall be free from defects in material and workmanship. Allied Machine’s sole and exclusive obligation under this warranty is limited to, at its option, without additional charge, replacing or repairing this product or issuing a credit. For this warranty to be applied, the product must be returned freight prepaid to the plant designated by an Allied Machine representative and which, upon inspection, is determined by Allied Machine to be defective in material and workmanship. Complete information as to operating conditions, machine, setup, and the application of cutting fluid should accompany any product returned for inspection. This warranty shall not apply to any Allied Machine products which have been subjected to misuse, abuse, improper operating conditions, improper machine setup or improper application of cutting fluid or which have been repaired or altered if such repair or alteration, in the judgement of Allied Machine, would adversely affect the performance of the product. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Allied Machine shall have no liability or responsibility for any claim, whether in contract, tort or otherwise, for any loss or damage arising out of, connected with, or resulting from the manufacture, sale, delivery or use of any product sold hereunder, in excess of the cost of replacement or repair as provided herein. Allied Machine shall not be liable in contract or in tort (including, without limitation, negligence, strict liability or otherwise) for economic losses of any kind or for any special, incidental, indirect, consequential, punitive or exemplary damages arising in any way out of the performance of, or failure to perform this agreement. ALL PRICES, DELIVERIES, DESIGNS, AND MATERIALS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Allied Machine & Engineering Co. Europe Ltd. is registered to ISO 9001:2015 by bsi.

Allied Machine & Engineering is registered to ISO 9001:2015 by DQS

Wohlhaupter GmbH is registered to ISO 9001:2015 by QA TECHNIC

Europe Allied Machine & Engineering Co. (Europe) Ltd. 93 Vantage Point Pensnett Estate Kingswinford West Midlands DY6 7FR England

Phone: +44 (0) 1384.400900

Wohlhaupter GmbH Maybachstrasse 4 Postfach 1264 72636 Frickenhausen Germany

Phone: +49 (0) 7022.408.0 Fax: +49 (0) 7022.408.212

United States Allied Machine & Engineering

Phone: +1.330.343.4283 Fax: +1.330.602.3400

Toll Free USA and Canada: 800.321.5537 Toll Free USA and Canada: 800.223.5140

120 Deeds Drive Dover OH 44622 United States

Allied Machine & Engineering 485 W Third Street Dover OH 44622 United States

Phone: +1.330.343.4283 Fax: +1.330.364.7666 (Engineering Dept.)

Toll Free USA and Canada: 800.321.5537

Asia Wohlhaupter India Pvt. Ltd. B-23, 3rd Floor B Block Community Centre Janakpuri, New Delhi - 110058 India

Phone: +91 (0) 11.41827044

Your local Allied Machine representative:

www.alliedmachine.com Allied Machine & Engineering is registered to Allied Machine & Engineering Co. (Europe) Ltd is registered to ISO 9001:2015 by bsi. ISO 9001:2015 by DQS Wohlhautper GmbH is registered to ISO 9001:2015 by QTA TECHNIC

Copyright © 2023 Allied Machine & Engineering Corp. All rights reserved. All trademarks designated with the ® symbol are registered in the United States and other countries. Available Online Only Publish Date: October 2023

Made with FlippingBook - Share PDF online