B10-F_EU-EN
Wohlhaupter® Master Shanks
Drilling
Reaming
Burnishing
Threading
Wohlhaupter ® BORING Master Shanks with MVS Connection
Specials
S E C T I O N B10-F Master Shanks with MVS Connection
Wohlhaupter ® Master Shanks with MVS Connection
The MVS Connection Wohlhaupter MVS connection shanks provide a high level of accuracy when building or replacing components. Our master shanks adapt to any machine tool spindle, making it easy to find the shank you need.
Your safety and the safety of others is very important. This catalogue contains important safety messages. Always read and follow all safety precautions. This triangle is a safety hazard symbol. It alerts you to potential safety hazards that can cause tool failure and serious injury. When you see this symbol in the catalogue, look for a related safety message that may be near this triangle or referred to in the nearby text. There are safety signal words also used in the catalogue. Safety messages follow these words. WARNING (shown above) means that failure to follow the precautions in this message could result in tool failure and serious injury. NOTICE means that failure to follow the precautions in this message could result in damage to the tool or machine but not result in personal injury. NOTE and IMPORTANT are also used. These are important that you read and follow but are not safety-related. Visit www.alliedmachine.com for the most up-to-date information and procedures. WARNING
Applicable Industries
Aerospace Agriculture
Automotive
Firearms
General Machining
Oil & Gas
Renewable Energy
Master Shanks with MVS Connection Table of Contents
Reference Icons The following icons will appear throughout the catalogue to help you navigate between products.
248 Shanks . . . . . . . . . . . . . . . . . 2
MVS Connection Colour Guide Detailed instructions and information regarding the MVS connection(s) Recommended Cutting Data Speed and feed recommendations for optimum and safe boring 248 Boring Head 248 boring head that connects into the adapter shanks
19.5-22 22-11
40-22 50-28 63-36 80-36 100-56
Carbide Shanks . . . . . . . . . . . . . . . . . 3
25-14 32-18
HSK Shanks (DIN 69893) . . . . . . . . . . . . . . . . . 4
Polygon Shaft Shanks (PSC) (ISO26623-1) . . . . . . . . . . . . . . . . . 5
CAT Shanks with Metric Threads . . . . . . . . . . . . . . . . . 6
Dual Contact SK Shanks (DIN 69871-AD / B -D) . . . . . . . . . . . . . . . . . 7
Clamping Elements Collet chucks for carbide shanks
SK Shanks (DIN 69871-AD / B -D) . . . . . . . . . . . . . . . . 8
Dual Contact BT Shanks (JIS B 6339) . . . . . . . . . . . . . . . . 9
Through Coolant Option Indicates that the product is through coolant
BT Shanks (JIS B 6339) . . . . . . . . . . . . . . . . 10
NMTB Shanks . . . . . . . . . . . . . . . . 11
DIN 2080 Shanks . . . . . . . . . . . . . . . . 12
Morse Taper Shanks (DIN 1806) & R8 Shanks . . . . . . . . . . . . . . . . 13
Accessories . . . . . . . . . . . . . . 14 - 15
Mounting Fixtures . . . . . . . . . . . . . . . . 16
B10-F: 1
BORING | Master Shanks with MVS Connection
248 Shanks Steel | Carbide
A
L 1
L 3
B
D 1
M8 x 1
C
Steel Shanks
Shank
L 3 min *
Connection
D 1
L 1
L 3 max* 37.00 52.00 69.00
SK 40+50
HSK-A 63
HSK-A 100
Weight 0.10 (kg) 0.20 (kg) 0.40 (kg)
Part No. 248136 248137 248138
D
M8 x 1 M8 x 1 M8 x 1
15.00 18.00 23.00
85.00
- - -
-
-
100.00 117.00
5.00
12.00 29.00
22.00
* L 3 dimensions apply to collet chucks.
E
L 1
L 3
F
D 1
M8 x 1
G
Carbide Shanks
H
Shank
L 3 min*
Connection
D 1
L 1
L 3 max* 82.00 107.00 132.00 194.00
SK 40 20.00 39.00 64.00
SK 50 20.00 21.00 46.00
HSK-A 63
HSK-A 100
Weight 0.30 (kg) 0.60 (kg) 1.10 (kg) 1.40 (kg)
Part No. 248142 248143 248144 248145
M8 x 1 M8 x 1 M8 x 1 M8 x 1
15.00 18.00 23.00 23.00
130.00 155.00 180.00 242.00
35.00 60.00 85.00
42.00 67.00 92.00
I
126.00
108.00
147.00
154.00
* L 3 dimensions apply to collet chucks.
J
K
B10-M: 12-13
B10-A: 30
B10: VI-VII
Key on B10-F: 1
19.5-22 22-11
40-22 50-28 63-36 80-36 100-56
25-14 32-18
= Metric (mm )
L
Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight. Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank). WARNING
M
-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio. -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio.
-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio. -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio. Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com
INDEX
B10-F: 2
www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com
BORING | Master Shanks with MVS Connection
Carbide Master Shanks
A
L 1
L 3
B
D 3
D 4
D 1
C
D
Connection
Shank
L 3 min
D 4 | D 3 18 - 11 22 - 11 22 - 11 22 - 11 25 - 14 25 - 14 32 - 18 32 - 18 40 - 22
L 1
D 1
L 3 max
SK 40 39.00 28.00 74.00
SK 50 26.00 28.00 56.00 97.00 36.00 81.00
HSK-A 63
HSK-A 100
Weight 0.50 (kg) 0.70 (kg) 0.90 (kg) 1.10 (kg) 1.00 (kg) 1.30 (kg) 2.10 (kg) 2.60 (kg) 5.20 (kg)
Part No. 299009* 299001* 299002* 299003* 299004* 299005* 299006** 299007** 299008**
155.00 140.00 190.00 231.00 165.00 215.00 210.00 260.00 415.00
18.00 22.00 22.00 22.00 25.00 25.00 32.00 32.00 40.00
107.00
60.00 45.00 95.00
67.00 52.00
92.00
E
142.00 183.00 117.00 167.00
102.00 143.00
115.00
136.00
49.00 99.00
70.00
77.00
120.00 139.00 189.00
127.00 137.00 187.00 333.00
- - -
136.00 186.00
136.00 186.00 333.00
F
-
-
NOTE : Adapter shanks are used for extensions up to 10xD. * Recommended clamping element: collet chuck ISO 15488 (DIN 6499-B) (pg. B10-I: 4). **Recommended clamping element: collet chuck ISO 10897 (DIN 6388) (pg. B10-I: 4).
G
H
I
J
K
B10-M: 12-13
B10: VI-VII
B10-I: 4
Key on B10-F: 1
19.5-22 22-11
40-22 50-28 63-36 80-36 100-56
25-14 32-18
= Metric (mm )
L
Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight. Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank). WARNING
M
-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio. -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio.
-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio. -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio. Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com
INDEX
www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com
B10-F: 3
BORING | Master Shanks with MVS Connection
HSK Master Shanks (DIN 69893) Balanced
A
X 1
L 1
B
D 3 D 4 D 5
D 3 D 4
D
X 1*
C
L 1
D 5
D
D
*X 1 : with one piece clamping nut
L 2
E
Taper Size
Connection
Shank
D
D 4 | D 3 40 - 22 50 - 28 40 - 22 50 - 28 25 - 14 32 - 18 40 - 22 50 - 28 63 - 36 80 - 36 50 - 28 50 - 28 50 - 28* 63 - 36 63 - 36 63 - 36 80 - 36 80 - 36 80 - 36 ER 40
X 1
L 1
L 2
D 5
Weight 0.40 (kg) 0.70 (kg) 0.60 (kg) 0.80 (kg) 0.70 (kg) 0.80 (kg) 0.80 (kg) 1.10 (kg) 1.50 (kg) 2.10 (kg) 1.70 (kg) 2.40 (kg) 5.00 (kg) 4.00 (kg) 2.90 (kg) 7.80 (kg) 7.80 (kg) 3.70 (kg) 12.60 (kg) 10.40 (kg) 5.00 (kg) 17.50 (kg) 3.50 (kg)
Part No. 246016 246004 246015 245011 246012 246013 246014 245012 245013 246009 245014 246020 246021 245015 246019 246022 245016 246018 246023 246010 246017 252090** 252091 **
40 40 50 50 63 63 63 63 63 63 63
56.00 70.00 56.00 65.00 46.00 56.00 56.00 65.00 80.00 80.00
- -
- - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - -
30.00
F
-
20.00 30.00 30.00 39.00
G
- -
120.00
94.00 36.00
95.00
63.00
100 100 100 100 100 100 100 100 100 100 100 100
65.00
-
180.00 180.00
151.00 151.00
60.00
H
- -
80.00
51.00
205.00 205.00
176.00 176.00
78.00
- -
80.00
51.00
255.00 255.00 100.00 300.00 120.00
226.00 226.00
90.00
I
- - -
100 - 56 100 - 56
-
221.00
ER 40
91.00
88.00
63.00
NOTE : Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg. * D 4 = 49.50 mm **Balanced without clamping nut.
J
K
B10-M: 12-13
B10: VI-VII
Key on B10-F: 1
19.5-22 22-11
40-22 50-28 63-36 80-36 100-56
25-14 32-18
= Metric (mm )
L
Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight. Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank). WARNING
M
-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio. -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio.
-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio. -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio. Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com
INDEX
B10-F: 4
www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com
BORING | Master Shanks with MVS Connection
Polygon Shaft Master Shanks (PSC) (ISO 26623-1) Balanced
A
X 1
L 1
B
D 3 D 4
D
C
D
PSC
Connection
Shank
D
D 4 | D 3 40 - 22 50 - 28 63 - 36 80 - 36 25 - 14 32 - 18 40 - 22 50 - 28 63 - 36 80 - 36 50 - 28 63 - 36 80 - 36 100 - 56
X 1
L 1
Weight 0.70 (kg) 1.00 (kg) 1.50 (kg) 2.50 (kg) 0.90 (kg) 1.00 (kg) 1.10 (kg) 1.30 (kg) 1.80 (kg) 2.60 (kg) 2.20 (kg) 2.60 (kg) 3.30 (kg) 4.88 (kg)
Part No. 227014 227001 227002 227012 227010 227009 227008 227003 227004 227005 227011 227006 227007 227013
50 50 50 50 63 63 63 63 63 63 80 80 80 80
54.00 65.00 80.00 80.00 54.00 54.00 65.00 65.00 80.00 80.00 65.00 80.00 80.00 80.00
31.10
- - -
E
21.10 23.00 36.40 39.00
F
- -
25.00 45.10
G
- -
NOTE : Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg.
H
I
J
K
B10-M: 12-13
B10: VI-VII
Key on B10-F: 1
19.5-22 22-11
40-22 50-28 63-36 80-36 100-56
25-14 32-18
= Metric (mm )
L
Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight. Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank). WARNING
M
-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio. -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio.
-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio. -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio. Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com
INDEX
www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com
B10-F: 5
BORING | Master Shanks with MVS Connection
CAT Master Shanks with Metric Threads
A
X 1
L 1
L 2
B
D 4 D 9
D 10
D 3
C
D
Connection
Shank
Taper Size
D 4 | D 3 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56
X 1
L 1
L 2
D 9
D 10
Weight 1.30 (kg) 1.80 (kg) 3.40 (kg) 3.70 (kg) 4.20 (kg) 5.20 (kg)
Part No.
132022T016960 132066T016960 132022T016962 132066T016962 132088T016962 132076T016962
40 40 50 50 50 50
62.00 82.00 62.00 72.00 72.00
42.90 62.90 42.90 52.90 52.90 85.90
- -
44.45 44.45 69.85 69.85 69.85 69.85
M16 x 2 M16 x 2 M24 x 3 M24 x 3 M24 x 3 M24 x 3
E
27.00 37.00
- -
105.00
F
G
H
I
J
K
B10-M: 12-13
B10: VI-VII
Key on B10-F: 1
19.5-22 22-11
40-22 50-28 63-36 80-36 100-56
25-14 32-18
= Metric (mm )
L
Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight. Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank). WARNING
M
-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio. -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio.
-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio. -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio. Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com
INDEX
B10-F: 6
www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com
BORING | Master Shanks with MVS Connection
Dual Contact SK Master Shanks (DIN 69871-AD / B -D)
A
X 1
L 1
B
D 4
D 10
D 3
C
D
Connection
Shank
Taper Size
D 4 | D 3 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56
X 1
L 1
D 10
Weight 1.10 (kg) 1.50 (kg) 2.90 (kg) 3.20 (kg) 3.70 (kg) 5.30 (kg)
Part No. 353064 353065 353066 353067 353068 353069
40 40 50 50 50 50
46.00 66.00 46.00 56.00 56.00 90.00
26.90 46.90 26.90 36.90 36.90 70.90
M16 x 2 M16 x 2 M24 x 3 M24 x 3 M24 x 3 M24 x 3
E
F
G
H
I
J
K
B10-M: 12-13
B10: VI-VII
Key on B10-F: 1
19.5-22 22-11
40-22 50-28 63-36 80-36 100-56
25-14 32-18
= Metric (mm )
L
Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight. Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank). WARNING
M
-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio. -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio.
-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio. -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio. Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com
INDEX
www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com
B10-F: 7
BORING | Master Shanks with MVS Connection
SK Master Shanks (DIN 69871-AD / B -D) Balanced
A
X 1*
X 1
L 1
L 1
D 3 D 4 D 5
D
D 5
B
10
D 3 D 4
L 2
*X 1 : with one piece clamping nut
C
D
Connection
Shank
Taper Size
D 4 | D 3 40 - 22 50 - 28 32 - 18 40 - 22 50 - 28 63 - 36 80 - 36 50 - 28 50 - 28 50 - 28* 63 - 36 63 - 36 63 - 36 80 - 36 80 - 36 80 - 36 ER 40
X 1
L 1
L 2
D 5
D 10
Weight
Part No. 327001 327002 327003 327004 327005 327006 327007 327017 327025 327033 327018 327026 327034 327010 327027 327035 327011 327028 259079** 259080**
30 30 40 40 40 40 40 40 50 50 50 50 50 50 50 50 50 50 50 50
46.00 58.00 55.00 46.00 46.00 66.00 66.00 80.00 46.00
26.90
- - - - - - - - - - - - - - - - - -
- -
M12 x 1.75 0.50 (kg) M12 x 1.75 0.80 (kg)
-
E
35.90 26.90 26.90 46.90
40.00
M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3
1.10 (kg) 1.00 (kg) 1.10 (kg) 1.40 (kg) 1.90 (kg) 1.30 (kg) 2.90 (kg) 6.00 (kg) 4.90 (kg) 3.20 (kg) 8.90 (kg) 6.90 (kg) 3.70 (kg) 13.60 (kg) 11.50 (kg) 5.30 (kg) 17.10 (kg) 3.10 (kg)
- - - -
-
F
60.90 26.90
116.00
63.00
-
186.00 186.00
166.90 166.90
60.00
- -
56.00
36.90
G
206.00 206.00
186.90 186.90
78.00
- -
56.00
36.90
256.00 256.00
236.90 236.90
90.00
- - -
100 - 56 100 - 56
90.00
-
H
290.00
270.90
ER 40
80.00
55.20
134.00
63.00
NOTE : Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg. * D 4 = (49.50 mm) **Balanced without clamping nut.
I
J
K
B10-M: 12-13
B10: VI-VII
Key on B10-F: 1
19.5-22 22-11
40-22 50-28 63-36 80-36 100-56
25-14 32-18
= Metric (mm )
L
Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight. Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank). WARNING
M
-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio. -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio.
-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio. -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio. Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com
INDEX
B10-F: 8
www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com
BORING | Master Shanks with MVS Connection
Dual Contact BT Master Shanks (JIS B 6339)
A
X 1
L 1
B
D 4
D 10
D 3
C
D
Connection
Shank
Taper Size
D 4 | D 3 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56
X 1
L 1
D 10
Weight 1.20 (kg) 1.50 (kg) 4.00 (kg) 4.20 (kg) 4.80 (kg) 5.50 (kg)
Part No. 353070 353071 353072 353073 353074 353075
40 40 50 50 50 50
54.00 64.00 65.00 75.00 75.00 90.00
27.00 37.00 26.80 36.80 36.80 51.80
M16 x 2 M16 x 2 M24 x 3 M24 x 3 M24 x 3 M24 x 3
E
F
G
H
I
J
K
B10-M: 12-13
B10: VI-VII
Key on B10-F: 1
19.5-22 22-11
40-22 50-28 63-36 80-36 100-56
25-14 32-18
= Metric (mm )
L
Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight. Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank). WARNING
M
-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio. -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio.
-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio. -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio. Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com
INDEX
www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com
B10-F: 9
BORING | Master Shanks with MVS Connection
BT Master Shanks (JIS B 6339) Balanced
A
X 1
L 1
B
D 10
D 3 D 4
D 3 D 4 D 5
C
X 1*
L 1
D
D 10
D 5
*X 1 : with one piece clamping nut
L 2
E
Connection
Shank
Taper Size
D 4 | D 3 40 - 22 50 - 28 40 - 22 50 - 28 63 - 36 50 - 28 50 - 28 50 - 28 63 - 36 63 - 36 63 - 36 80 - 36 80 - 36 80 - 36 100 - 56 100 - 56 ER 40
X 1
L 1
L 2
D 5
D 10
Weight 0.50 (kg) 0.60 (kg) 1.10 (kg) 1.20 (kg) 1.50 (kg) 1.20 (kg) 3.90 (kg) 7.00 (kg) 5.90 (kg) 4.20 (kg) 9.90 (kg) 7.80 (kg) 4.70 (kg) 14.80 (kg) 14.80 (kg) 5.50 (kg) 17.30 (kg) 3.80 (kg)
Part No. 327012 327013 327016 327019 327020 259081 * 327021 327029** 327036** 327030** 327037** 327031** 327038** 327032** 259082* 327022 327023 327024
30 30 40 40 40 40 50 50 50 50 50 50 50 50 50 50 50 50
40.00 46.00 46.00 54.00 64.00 70.00 65.00
18.00
- - - - - - - - - - - - - - - -
- - - - -
M12 x 1.75 M12 x 1.75
-
F
19.00 27.00
M16 x 2 M16 x 2 M16 x 2 M16 x 2 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3
-
43.00 26.80
104.00
63.00
-
G
205.00 205.00
166.80 166.80
60.00 49.50
75.00
36.80
-
225.00 225.00
186.80 186.80
78.00
- -
75.00
36.80
H
275.00 275.00
236.80 236.80
90.00
- - -
90.00
-
290.00
251.80
ER 40
80.00
41.80
135.00
63.00
I
NOTE : Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg. *Balanced without clamping nut. **Available upon request.
J
K
B10-M: 12-13
B10: VI-VII
Key on B10-F: 1
19.5-22 22-11
40-22 50-28 63-36 80-36 100-56
25-14 32-18
= Metric (mm )
L
Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight. Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank). WARNING
M
-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio. -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio.
-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio. -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio. Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com
INDEX
B10-F: 10
www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com
BORING | Master Shanks with MVS Connection
NMTB Master Shanks
A
X 1
L 1
B
D 9
D 3 D 4
C
D
Connection
Shank
Taper Size
D 4 | D 3 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56
X 1
L 1
D 9
Weight 1.30 (kg) 1.50 (kg) 3.00 (kg) 3.50 (kg) 4.00 (kg) 4.90 (kg)
Part No.
5/8 - 11 5/8 - 11
132022T004498 132066T004498 132022T004480 132066T004480 132088T004480 132076T004480
40 40 50 50 50 50
38.00 48.00 42.00 52.00 52.00 90.00
26.40 36.40 26.80 36.80 36.80 74.80
E
1 - 8 1 - 8 1 - 8 1 - 8
F
G
H
I
J
K
B10-M: 12-13
B10: VI-VII
Key on B10-F: 1
19.5-22 22-11
40-22 50-28 63-36 80-36 100-56
25-14 32-18
= Metric (mm )
L
Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight. Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank). WARNING
M
-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio. -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio.
-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio. -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio. Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com
INDEX
www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com
B10-F: 11
BORING | Master Shanks with MVS Connection
DIN 2080 Master Shanks
A
X 1
L 1
B
D 9
D 3 D 4
X 1*
C
L 1
D 5
D 9
D
L 2
*X 1 : with one piece clamping nut
Connection
Shank
E
Taper Size
D 4 | D 3 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56
X 1
L 1
L 2
D 5
D 9
Weight 1.30 (kg) 1.50 (kg) 3.00 (kg) 3.50 (kg) 4.00 (kg) 4.90 (kg) 3.30 (kg)
Part No.
132022T010229 132066T010229 132022T003704 132066T003704 132088T003704 132076T003704
40 40 50 50 50 50 50
38.00 48.00 42.00 52.00 52.00 90.00 80.00
26.40 36.40 26.80 36.80 36.80 74.80 64.80
- - - - - -
- - - - - -
M16 x 2 M16 x 2 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3
F
259084
ER 40
134.00
63.00
G
H
I
J
K
B10-M: 12-13
B10: VI-VII
Key on B10-F: 1
19.5-22 22-11
40-22 50-28 63-36 80-36 100-56
25-14 32-18
= Metric (mm )
L
Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight. Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank). WARNING
M
-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio. -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio.
-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio. -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio. Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com
INDEX
B10-F: 12
www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com
BORING | Master Shanks with MVS Connection
DIN 1806 Morse Taper Master Shanks | R8 Master Shanks
A
X 1
L 1
B
D 3 D 4
C
DIN 1806 Master Shanks
Connection
Shank
D
Morse Taper Size
D 4 | D 3 50 - 28 50 - 28 63 - 36
X 1
L 1
Weight 1.10 (kg) 1.80 (kg) 2.20 (kg)
Part No.
132022T003590 132022T003920 132066T003920
4 5 5
43.00 33.00 53.00
36.50 26.70 46.70
E
F
X 1 L 1
G
D 3 D 4
7/16 - 20 UNF
H
Connection
Shank
I
D 4 | D 3 50 - 28 63 - 36
X 1
L 1
Weight 1.00 (kg) 1.30 (kg)
Part No.
132022T007166 132066T007166
45.00 60.00
36.00 51.00
J
K
B10-M: 12-13
B10: VI-VII
Key on B10-F: 1
19.5-22 22-11
40-22 50-28 63-36 80-36 100-56
25-14 32-18
= Metric (mm )
L
Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight. Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank). WARNING
M
-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio. -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio.
-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio. -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio. Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com
INDEX
www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com
B10-F: 13
BORING | Master Shanks with MVS Connection
Accessories Coolant Adapter Sets | Service Keys | ISO 15488 (DIN 6499-B) Collet Chuck Accessories
A
Coolant Adapter Sets
B
HSK Shank Size
Thread
Part No. 262002 262003 262004 262005 262006 262007
32 40 50 63 80
M10 x 1.5 x 1.0 M12 x 1.75 x 1.0 M16 x 2 x 1.0 M18 x 2.5 x 1.0 M20 x 2.5 x 1.5 M24 x 3 x 1.5
C
100
D
Service Keys
HSK Shank Size
D
Part No. 315234 315235 215726 215727 * 415127 215728
E
32 40 50 63 80
8.50
10.50 14.50 16.50 18.00 22.00
D
F
100
*Two piece
L 1
G
ISO 15488 (DIN 6499-B) One Piece Clamping Nut
Clamping Nut
H
Nominal Size
L 1
D 1
Part No. 215926
D 1
ER 40
25.50
63.00
I
L 1
ISO 15488 (DIN 6499-B) Sealing Disk Clamping Nut
J
Sealing Disk Clamping Nut
Nominal Size
L 1
D 1
Part No. 278001
ER 40
34.00
63.00
D 1
K
L
M
B10-M: 12-13
B10: VI-VII
Key on B10-F: 1
19.5-22 22-11
40-22 50-28 63-36 80-36 100-56
25-14 32-18
= Metric (mm )
INDEX
B10-F: 14
www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com
BORING | Master Shanks with MVS Connection
Accessories ISO 15488 (DIN 6499-B) Collet Chuck Accessories
A
ISO 15488 (DIN6499-B) Collets Clamping Range
L 1
Collet
B
A
L 1
D 1
Part No. 071790 071793 071795 071798
15.00 - 14.00 18.00 - 17.00 20.00 - 19.00 23.00 - 22.00
46.00 46.00 46.00 46.00
40.00 40.00 40.00 40.00
D 1
A
C
D
ISO 15488 (DIN 6499-B) Service Keys
Service Key
D
E
Nominal Size
D
Part No. 215931
ER 40
63.00
F
ISO 15488 (DIN 6499-B) Sealing Disks Clamping Range
Part No. 278029 278035 278039 278045
G
15.00 - 14.50 18.00 - 17.50 20.00 - 19.50 23.00 - 22.50
H
I
Application with clamping nuts and sealing disks when using central coolant feed:
Clamping Nut
J
Interchangeable Sealing Disk
K
Collet
Adapter Shank (Section A)
248 Boring Tool (Section A) 3.00 mm - 30.20 mm
Twin Cutter (Section D) 19.50 mm - 29.50 mm
L
M
B10-M: 12-13
B10: VI-VII
Key on B10-F: 1
19.5-22 22-11
40-22 50-28 63-36 80-36 100-56
25-14 32-18
= Metric (mm )
INDEX
www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com
B10-F: 15
BORING | Master Shanks with MVS Connection
Accessories Mounting Fixtures
A
B
C
D
Mounting Fixture
Code
Type
Part No. 098060 098073 098061 098062 098063 098064 098065 098066 098067 098068 098069 098070 098071
Basic Body*
-
Adapter Adapter Adapter Adapter Adapter Adapter Adapter Adapter Adapter Adapter Adapter Adapter
30 Taper 40 Taper 50 Taper HSK-A 32 HSK-A 40 HSK-A 50 HSK-A 63 HSK-A 80 HSK-A 100
E
F
PSC 50 PSC 63 PSC 80
G
*Basic body and adapters sold separately.
H
I
J
K
B10-M: 12-13
B10: VI-VII
Key on B10-F: 1
19.5-22 22-11
40-22 50-28 63-36 80-36 100-56
25-14 32-18
= Metric (mm )
L
Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight. Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank). WARNING
M
-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio. -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio.
-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio. -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio. Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com
INDEX
B10-F: 16
www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com
BORING | Master Shanks with MVS Connection
Notes
A
B
C
D
E
F
G
H
I
J
K
L
M
INDEX
www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com
B10-F: 17
Allied Machine & Engineering
Guaranteed Test / Demo Application Form
Distributor PO #
The following must be filled out completely before your test will be considered
IMPORTANT: For processing, send Purchase Order to your Allied Field Sales Engineer (FSE). Please clearly mark the paperwork as “Test Order.” Distributor Information Company Name: Contact: Account Number: Phone: Email: Current Process List all tooling, coatings, substrates, speeds and feeds, tool life, and any problems you are experiencing End User Information Company Name: Contact: Industry: Phone: Email:
Test Objective
List what would make this a successful test (i.e. penetration rate, finish, tool life, hole size, etc.)
Application Information
Hole Diameter:
in/mm
Tolerance:
Material:
(4150 / A36 / Cast Iron / etc.)
Pre-existing Diameter:
in/mm
Depth of Cut:
in/mm
Hardness:
(BHN / Rc)
Required Finish:
RMS
State:
(Casting / Hot rolled / Forging)
Machine Information
Machine Type:
Builder:
Model #:
(Lathe / Screw machine / Machine center / etc.)
(Haas, Mori Seiki, etc.)
Shank Required:
Power:
HP/KW
(CAT50 / Morse taper, etc.)
Thrust:
lbs/N
Rigidity:
Orientation: Vertical
Tool Rotating: Yes No
Excellent Good Poor
Horizontal
Coolant Information
Coolant Delivery:
Coolant Pressure:
PSI / bar
(Through tool / Flood)
Coolant Type:
Coolant Volume:
GPM / LPM
(Air mist, oil, synthetic, water soluble, etc.)
Requested Tooling QTY Item Number
engineering.eu@alliedmachine.com Allied Machine & Engineering Co. (Europe) Ltd 93 Vantage Point, Pensnett Estate, Kingswinford, DY6 7FR, United Kingdom +44 (0)1384 400 900 www.alliedmachine.com
QTY Item Number
www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com
Warranty Information
Allied Machine & Engineering (“Allied Machine”) warrants to original equipment manufacturers, distributors, industrial and commercial users of its products for one year from the original date of sale that each new product manufactured or supplied by Allied Machine shall be free from defects in material and workmanship. Allied Machine’s sole and exclusive obligation under this warranty is limited to, at its option, without additional charge, replacing or repairing this product or issuing a credit. For this warranty to be applied, the product must be returned freight prepaid to the plant designated by an Allied Machine representative and which, upon inspection, is determined by Allied Machine to be defective in material and workmanship. Complete information as to operating conditions, machine, setup, and the application of cutting fluid should accompany any product returned for inspection. This warranty shall not apply to any Allied Machine products which have been subjected to misuse, abuse, improper operating conditions, improper machine setup or improper application of cutting fluid or which have been repaired or altered if such repair or alteration, in the judgement of Allied Machine, would adversely affect the performance of the product. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Allied Machine shall have no liability or responsibility for any claim, whether in contract, tort or otherwise, for any loss or damage arising out of, connected with, or resulting from the manufacture, sale, delivery or use of any product sold hereunder, in excess of the cost of replacement or repair as provided herein. Allied Machine shall not be liable in contract or in tort (including, without limitation, negligence, strict liability or otherwise) for economic losses of any kind or for any special, incidental, indirect, consequential, punitive or exemplary damages arising in any way out of the performance of, or failure to perform this agreement. ALL PRICES, DELIVERIES, DESIGNS, AND MATERIALS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Allied Machine & Engineering Co. Europe Ltd. is registered to ISO 9001:2015 by bsi.
Allied Machine & Engineering is registered to ISO 9001:2015 by DQS
Wohlhaupter GmbH is registered to ISO 9001:2015 by QA TECHNIC
Europe Allied Machine & Engineering Co. (Europe) Ltd. 93 Vantage Point Pensnett Estate Kingswinford West Midlands DY6 7FR England
Phone: +44 (0) 1384.400900
Wohlhaupter® GmbH Maybachstrasse 4 Postfach 1264 72636 Frickenhausen Germany
Phone: +49 (0) 7022.408.0
United States Allied Machine & Engineering
Phone: +1.330.343.4283
Toll Free USA and Canada: 800.321.5537 Toll Free USA and Canada: 800.223.5140
120 Deeds Drive Dover OH 44622 United States
Allied Machine & Engineering 485 W Third Street Dover OH 44622 United States Asia Wohlhaupter® India Pvt. Ltd. B-23, 3rd Floor B Block Community Centre Janakpuri, New Delhi - 110058 India
Phone: +1.330.343.4283
Toll Free USA and Canada: 800.321.5537
Phone: +91 (0) 11.41827044
Your local Allied Machine representative:
www.alliedmachine.com Allied Machine & Engineering Co. (Europe) Ltd is registered to ISO 9001:2015 by bsi.
Wohlhaupter GmbH is registered to ISO 9001:2015 by QTA TECHNIC Allied Machine & Engineering is registered to ISO 9001:2015 by DQS
Copyright © 2024 Allied Machine & Engineering Corp. All rights reserved. All trademarks designated with the ® symbol are registered in the United States and other countries.
Available Online Only Publish Date: July 2024
Made with FlippingBook - Share PDF online