B10-F_EU-EN

BORING | Master Shanks with MVS ConnecƟon

Polygon ShaŌ Master Shanks (PSC) (ISO 26623-1) Balanced

A

X 1

L 1

B

D 3 D 4

D

C

D

PSC

ConnecƟon

Shank

D

D 4 | D 3 40 - 22 50 - 28 63 - 36 80 - 36 25 - 14 32 - 18 40 - 22 50 - 28 63 - 36 80 - 36 50 - 28 63 - 36 80 - 36 100 - 56

X 1

L 1

Weight 0.70 (kg) 1.00 (kg) 1.50 (kg) 2.50 (kg) 0.90 (kg) 1.00 (kg) 1.10 (kg) 1.30 (kg) 1.80 (kg) 2.60 (kg) 2.20 (kg) 2.60 (kg) 3.30 (kg) 4.88 (kg)

Part No. 227014 227001 227002 227012 227010 227009 227008 227003 227004 227005 227011 227006 227007 227013

50 50 50 50 63 63 63 63 63 63 80 80 80 80

54.00 65.00 80.00 80.00 54.00 54.00 65.00 65.00 80.00 80.00 65.00 80.00 80.00 80.00

31.10

- - -

E

21.10 23.00 36.40 39.00

F

- -

25.00 45.10

G

- -

NOTE : Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg.

H

I

J

K

B10-M: 12-13

B10: VI-VII

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm )

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING

M

-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-F: 5