B10-I_EU-EN

First page Table of contents 1 Next page Last page

Wohlhaupter Modular Tool Holders

Drilling

Reaming

Burnishing

Threading

Wohlhaupter ® BORING Modular Tool Holders

Specials

S E C T I O N B10-I Modular Tool Holders

Clamping Tools with MVS ConnecƟon Wohlhaupter offers a complete range of tool holders that incorporates the MVS connecƟon. Our clamping tools allow for smaller MVS tools to connect and provide a quick and inexpensive alternaƟve to special tooling. Many of the clamping tools also feature coolant-through capabiliƟes.

Your safety and the safety of others is very important. This catalogue contains important safety messages. Always read and follow all safety precauƟons. This triangle is a safety hazard symbol. It alerts you to potenƟal safety hazards that can cause tool failure and serious injury. When you see this symbol in the catalogue, look for a related safety message that may be near this triangle or referred to in the nearby text. There are safety signal words also used in the catalogue. Safety messages follow these words. WARNING (shown above) means that failure to follow the precauƟons in this message could result in tool failure and serious injury. NOTICE means that failure to follow the precauƟons in this message could result in damage to the tool or machine but not result in personal injury. NOTE and IMPORTANT are also used. These are important that you read and follow but are not safety-related. Visit www.alliedmachine.com for the most up-to-date informaƟon and procedures. WARNING

Applicable Industries

Aerospace Agriculture

AutomoƟve

Firearms

General Machining

Oil & Gas

Renewable Energy

Modular Tool Holders Table of Contents

Reference Icons The following icons will appear throughout the catalogue to help you navigate between products.

Adapter Side Lock for Cylindrical Shanks . . . . . . . . . . . . . . . . . 2

MVS ConnecƟon Colour Guide Detailed instrucƟons and informaƟon regarding the MVS connecƟon(s)

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

Drill Chucks . . . . . . . . . . . . . . . . . 3

Collet Chucks . . . . . . . . . . . . . . . . . 4

Recommended Cuƫng Data Speed and feed recommendaƟons for opƟmum and safe boring

Milling Machine Arbors . . . . . . . . . . . . . . . . . 5

Through Coolant OpƟon Indicates that the product is through coolant

Holding Arbors for Milling CuƩers . . . . . . . . . . . . . . . . . 6

Clamping and Tapping Chucks . . . . . . . . . . . . . . . . . 7

Boring Bar Blanks . . . . . . . . . . . . . . . . . 8

Accessories for Adapter Sleeves Thread Pins and Ball Pressure Screws . . . . . . . . . . . . . . . . . 9 Adapter Sleeves for Tap Shanks . . . . . . . . . . . . . . . . . 10 Micro Clamping Chucks . . . . . . . . . . . . . . . . . 11

Accessories for Drill Chucks . . . . . . . . . . . . . . . . . 12

Collet Chucks for Erickson System . . . . . . . . . . . . . . . . . 13

Accessories for Collet Chucks . . . . . . . . . . . . . . 14 - 30

Sealing Disks for Collet Chucks . . . . . . . . . . . . . . 31 - 32

Accessories for Milling Machine Arbors . . . . . . . . . . . . . . . . . 33

Reducing Sleeves for Hydraulic Clamping Chucks . . . . . . . . . . . . . . . . . 34

Quick Change Adapters . . . . . . . . . . . . . . 35 - 38

Service Keys . . . . . . . . . . . . . . . . . 39

B10-I: 1

BORING | Modular Tool Holders

Adapter Side Lock for Cylindrical Shanks DIN 1835B Clamping Diameter Range: 6.00 mm - 40.00 mm

X 1

L 1

D 2 D 1

D 5

Threaded Hole for Balancing Screw

L 2

D 3

MVS ConnecƟon

Clamping Range

Adapter Sleeve

D 2 | D 1 32 - 18 32 - 18 32 - 18 40 - 22 40 - 22 50 - 28 50 - 28 50 - 28 50 - 28 50 - 28 50 - 28 50 - 28 63 - 36 63 - 36 63 - 36 80 - 36

D 3

X 1

L 1

L 2

D 5

Weight 0.20 (kg) 0.20 (kg) 0.30 (kg) 0.50 (kg) 0.60 (kg) 0.40 (kg) 0.40 (kg) 0.50 (kg) 0.50 (kg) 1.00 (kg) 1.00 (kg) 1.20 (kg) 1.10 (kg) 1.90 (kg) 2.20 (kg) 2.50 (kg)

Balancing Screw Part No.

228022 228023 228024 228025 228026 162015 162016 162017 162018 162019 228014 162020 161024 161026 161027 161028

6.00 8.00

36.00 36.00 48.00 52.00 54.00 36.00 36.00 44.00 44.00 49.00 49.00 60.00 49.00 75.00 75.00 85.00

23.00 23.00

40.00 40.00 44.00 49.00 49.00 40.00 40.00 44.00 49.00 52.00 52.00 54.00 54.00 59.00 63.00 73.00

25.00 28.00 35.00 42.00 44.00 25.00 28.00 35.00 42.00 48.00 48.00 52.00 52.00 63.00 72.00 80.00

M5 x .8 x 6 M5 x .8 x 6 M5 x .8 x 6 M5 x .8 x 8 M5 x .8 x 8 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 15 M6 x 1 x 15 M6 x 1 x 15

10.00 12.00 14.00

- - -

6.00 8.00

23.00 23.00 31.00 31.00 36.00 36.00

10.00 12.00 16.00 18.00 20.00 20.00 25.00 32.00 40.00

36.00

- - -

NOTE: Balanced 10 gmm/kg. NOTE: When using a ball pressure screw instead of a thread pin, it's similar to DIN 1835E, without axial adjustment. See ball pressure screws on page B10-I: 9.

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

B10-I: 2

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

BORING | Modular Tool Holders

Drill Chucks for Clockwise & Counterclockwise RotaƟon Clamping Diameter Range: 0.50 mm - 16.00 mm

X 1

D 2 D 1

D 5

MVS ConnecƟon

Clamping Range

Drill Chuck

D 2 | D 1 50 - 28 50 - 28 63 - 36 63 - 36

X 1

D 5

Weight 1.10 (kg) 1.30 (kg) 1.30 (kg) 1.50 (kg)

Part No. 209088 209089 209090 209091

0.50 - 13.00 2.50 - 16.00 0.50 - 13.00 2.50 - 16.00

80.00 85.00 80.00 85.00

50.00 57.00 50.00 57.00

s6 / B s6 / B s6 / B s6 / B

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-I: 3

BORING | Modular Tool Holders

Collet Chucks ISO 10897 (DIN 6388) | ISO 15488 (DIN 6499) Clamping Diameter Range: 2.00 mm - 32.00 mm X 1

X 1

L 1

4 mm

Form A

D 2 D 1

D 5

Form B

Collet Chucks ISO 10897 (DIN 6388) | Diameter Range: 2.00 mm - 32.00 mm MVS ConnecƟon Clamping Range

Collet Chuck

D 2 | D 1 40 - 22 50 - 28 50 - 28 63 - 36 63 - 36

X 1 *

L 1

D 5

Nominal Size

Weight 0.50 (kg) 0.90 (kg) 1.00 (kg) 1.40 (kg) 1.80 (kg)

Part No. 209082 162011 209083 161016 161098

2.00 - 16.00 2.00 - 16.00 2.00 - 25.00 2.00 - 25.00 4.00 - 32.00

16 16 25 25 32

64.00 63.00 74.00 74.00 89.00

43.00 43.00 60.00 60.00 72.00

50.00

- - -

*X 1 Clamping nut with ball-bearing.

X 1

L 1

D 2 D 1

D 5 D

Collet Chucks ISO 15488 (DIN 6499) | Diameter Range: 1.00 mm - 26.00 mm MVS ConnecƟon Clamping Range

Collet Chuck

D 2 | D 1 32 - 18 40 - 22 50 - 28 50 - 28 63 - 36 63 - 36

X 1 *

L 1

D 5

Nominal Size

Weight 0.20 (kg) 0.60 (kg) 0.80 (kg) 0.80 (kg) 1.20 (kg) 1.20 (kg)

Part No. 228020 228021 228003 228004 228007 228006

1.00 - 10.00 2.00 - 16.00 2.00 - 16.00 2.00 - 20.00 2.00 - 20.00 4.00 - 26.00

ER 16 ER 25 ER 25 ER 32 ER 32 ER 40

54.00 75.00 75.00 76.00 76.00 88.00

4100

28.00 42.00 42.00 50.00 50.00 63.00

62.00

63.00

*X 1 Clamping nut with sliding ring.

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

B10-I: 4

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

BORING | Modular Tool Holders

Milling Machine Arbors For Milling CuƩers with Longitudinal or Transverse Drive | Shell Mill Adapter Range: 13.00 mm - 40.00 mm X 1

X 2

D 2 D 1

D 5 D 6

L 1

L 2

MVS ConnecƟon

Adapter Range

Milling Arbor

D 2 | D 1 50 - 28 50 - 28 50 - 28 63 - 36 63 - 36 63 - 36 63 - 36 80 - 36

D 5

X 1

X 2

L 1

L 2

D 6

Weight 0.40 (kg) 0.50 (kg) 0.60 (kg) 0.80 (kg) 0.90 (kg) 1.10 (kg) 1.30 (kg) 2.60 (kg)

Part No. 162002 162003 162004 161002 161003 161004 161005 161006

13.00 16.00 22.00 16.00 22.00 27.00 32.00 40.00

34.00 40.00 40.00 40.00 40.00 40.00 40.00 53.00

24.00 30.00 28.00 30.00 28.00 28.00 26.00 39.00

11.00 17.00 15.00 17.00 15.00 15.00 13.00

22.00 27.00 31.00 27.00 31.00 33.00 38.00 41.00

28.00 32.00 40.00 32.00 40.00 48.00 58.00

70.00*

*Ø 70.00 mm with clutch drive ring.

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-I: 5

BORING | Modular Tool Holders

Holding Arbors for Milling CuƩers Central Coolant Feed | Shell Mill Adapter Range: 16.00 mm - 40.00 mm

X 1

D 4

L 1

D 2 D 1

D 5 D 6

MVS ConnecƟon

Adapter Range

Holding Arbor

D 2 | D 1 50 - 28 50 - 28 63 - 36 80 - 36 80 - 36

D 5

X 1

L 1

D 4

D 6

Weight 0.40 (kg) 0.50 (kg) 0.80 (kg) 1.10 (kg) 1.50 (kg)

Part No. 162032 162033 161082 209080 209081

16.00 22.00 27.00 32.00 40.00

16.00 16.00 16.00 16.00 19.00

17.00 19.00 21.00 24.00 27.00

- - - -

40.00 50.00 60.00 78.00 89.00

66.70

NOTE: See page B10-G: 15 for holding arbor with MVS 100 - 56 connecƟon.

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

B10-I: 6

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

BORING | Modular Tool Holders

Clamping Chucks | Tapping Chucks Clamping Range: 20.00 mm

S 2

X 1

Locking

L 1

D 5 D 3

D 2 D 1

10 mm

S 1 Adjustment

L 2

Though Coolant Hydraulic Clamping Chucks MVS ConnecƟon Clamping Range

Clamping Chucks

D 2 | D 1 50 - 28 63 - 36

D 3

X 1

D 5

L 1

L 2

S 1 s6 s5

S 2 s5 s5

Weight 0.80 (kg) 1.10 (kg)

Part No. 209044 209045

20.00 20.00

75.00 75.00

42.00 42.00

58.00 53.00

51.00 51.00

Note: Balanced corresponds to a specific residual imbalance of ≤ 10 gmm/kg.

X 1

L 1

D 2 D 1

D 5 D 6

Tapping Chucks (Non-Coolant) MVS ConnecƟon

Quick Change Adapters

Tapping Chucks

Length CompensaƟon

D 2 | D 1 50 - 28 50 - 28 63 - 36 63 - 36 63 - 36

X 1

L 1

D 5

D 6

For Taps

Nominal Size

Pressure Tension Weight

Part No. 209098 209099 231005 231006 231007

M 3 - M 12 M 6 - M 20 M 3 - M 12 M 6 - M 20 M 14 - M 33

1 2 1 2 3

62.00 49.00 19.00 41.50

7.50

0.70 (kg)

94.00

- 31.00 60.30 10.00

10.00 1.10 (kg)

56.00 43.00 19.00 41.50

7.50

0.80 (kg)

80.00 67.00 31.00 60.30 10.00

10.00 1.30 (kg) 17.50 4.10 (kg)

152.00

- 48.00 86.00 17.50

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-I: 7

BORING | Modular Tool Holders

Boring Bar Blanks

L 1

D 2 D 1

NOTE: The blanks are unhardened and unground in areas marked

MVS ConnecƟon

Boring Bar Blanks

D 2 | D 1 50 - 28 63 - 36 80 - 36

L 1

Weight 2.60 (kg) 4.20 (kg) 6.60 (kg)

Part No. 166103 166104 166105

160.00 160.00 160.00

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

B10-I: 8

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

BORING | Modular Tool Holders

Accessories for Adapter Sleeves

DIN 1835B

Similar to DIN 1835E*

1 Thread Pin

2 Ball Pressure Screw

Clamping Diameter

Part No. 115680 115681 115682 115683 115683 115684 115684 115685 115686 115687 115687

Service Key

Part No. 315788 315789 515535 315790 315790 515675 515675 515676 515677 515678 515678

Service Key

Thread M6 x 1

6.00 8.00

s3 / B s4 / B s5 / B s6 / B s6 / B s6 / B s6 / B s8 / B

M8 x 1.25 M10 x 1.5 M12 x 1.75 M12 x 1.75

10.00 12.00 14.00 16.00 18.00 20.00 25.00 32.00 40.00

M14 x 2 M14 x 2 M16 x 2

s10 / B s10 / B s10 / B

M18 x 2 (2x) M20 x 2 (2x) M20 x 2 (2x)

*Without axial adjustment.

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-I: 9

BORING | Modular Tool Holders

Accessories for Adapter Sleeves Adapter Sleeve for Tap Shanks Suitable for ReducƟon Sleeves with Shanks to DIN 1835-B

D 2

Square Shank

D 1h6

Adapter Sleeves

D 1h6 8.00 8.00

D 2 x Square Shank

Part No. 271190 271191 271192 271193 271194 271195 271196 271197 271198 271199 271200 271201 271202 271203 271204 271205 271206 271207 271208 271209 271210 271211

2.50 x 2.10 2.80 x 2.10 3.50 x 2.70 4.00 x 3.00 4.50 x 3.40 6.00 x 4.90 7.00 x 5.50 8.00 x 6.20 9.00 x 7.00 10.00 x 8.00 11.00 x 9.00 12.00 x 9.00 14.00 x 11.00 16.00 x 12.00 18.00 x 14.50 20.00 x 16.00 22.00 x 18.00 25.00 x 20.00 28.00 x 22.00 32.00 x 24.00 36.00 x 29.00 40.00 x 32.00

10.00 10.00 10.00 12.00 14.00 14.00 16.00 16.00 18.00 20.00 25.00 25.00 32.00 32.00 32.00 40.00 40.00 50.00 50.00 50.00

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

B10-I: 10

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

BORING | Modular Tool Holders

Accessories for Adapter Sleeves Adapter Sleeve for Tap Shanks Suitable for ReducƟon Sleeves with Shanks to DIN 1835-B

L 1

L 2

D 3

D 2H5

D 1h6

Micro Clamping Chucks

1 Clamping Wedge

D 1h6

D 2H5 6.00 8.00

D 3

L 1

L 2

Part No. 219170 219171 219172 219173 219174 219174 219174 219175

Part No. 219070 219071 219072 219073 219074 219075 219076

16.00 16.00 20.00 25.00 25.00 32.00 32.00 32.00

12.00 14.00 17.00 20.00 22.00 25.00 27.00 30.00

100.00 100.00 100.00 110.00 110.00 125.00 130.00 130.00

40.00 45.00 43.00 39.00 46.00 45.00 54.00 62.00

10.00 12.00 14.00 16.00 18.00 20.00

219077 NOTE : Clamping chucks are used in reducƟon sleeves for clamping tools with cylindrical shanks to DIN 1835-B (Fig. 1). The chucks' design allows the use of standard tools versus ordering special tools (Fig. 2).

Figure 1

Figure 2

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-I: 11

BORING | Modular Tool Holders

Accessories for Drill Chucks Service Keys | Gaskets | Assembly Tool

Service Keys for Drill Chucks Service Key

Tightening Torque Nm

Service Key

Type

Part No. 415577 115578

2.50 6.00

B B

15 15

Gaskets for Drill Chucks

Gasket

Gasket Diameter

Clamping Diameter

Part No. 387113 387114 387115 387116

3.00 - 6.00 6.00 - 13.00 3.00 - 6.00 6.00 - 16.00

0.50 - 13.00 0.50 - 13.00 2.50 - 16.00 2.50 - 16.00

Assembly Tool for Gasket

Part No. 387112

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

B10-I: 12

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

BORING | Modular Tool Holders

Collet Chucks for Erickson System | Cylindrical Collet Chucks for ISO 15488 (DIN 6499) Collets Diameter Range: 1.00 mm - 10.00 mm

L 2

L 3

D 3

D 2 D

L 4

L 1

Collet Chucks for Erickson System

Clamping Range

Collet Chuck

Service Key

Nominal Size

D 2

D 3

L 1

L 2

L 3

L 4 Min

L 4 Max

Weight 0.20 (kg) 0.20 (kg) 0.30 (kg) 0.30 (kg)

Part No. 162080 162081 162082 162083

6 6

0.50 - 6.00 0.50 - 6.00 0.50 - 10.00 0.50 - 10.00

14.00 12.50 109.00 76.00 33.00 38.00 100.00 14.00 12.50 173.00 140.00 33.00 38.00 162.00 21.00 20.00 117.00 76.00 41.00 40.00 103.00 21.00 20.00 181.00 140.00 41.00 40.00 167.00

13 13 19 19

10 10

L 2

L 3

D 2 D

D 3

L 4

L 1

Cylindrical Collet Chucks for ISO 15488 (DIN 6499) Collets

Collet Chuck

Hex Size

Nominal Size

D 2

D 3

L 1

L 2

L 3

L 4 Min 36.50 36.50 23.00 23.00 33.00 33.00

L 4 Max 36.50 36.50 65.00 65.00 102.00 123.00

Part No. 209054 209055 209056 209057 209058 209059

ER 8 ER 8

1.00 - 5.00 1.00 - 5.00 1.00 - 7.00 1.00 - 7.00 1.00 - 10.00 1.00 - 10.00

12.00 12.00 16.00 16.00 22.00 22.00

8.00

126.00 166.00 106.50 166.50 118.50 178.50

100.00 140.00

26.00 26.00 26.50 26.50 38.50 38.50

09 09 11 11 17 17

12.00 16.00 16.00 20.00 20.00

ER 11 ER 11 ER 16 ER 16

80.00

140.00

80.00

140.00

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-I: 13

BORING | Modular Tool Holders

Accessories for Collet Chucks Diameter Range: 0.50 mm - 10.00 mm

D 1

D 2

L 1

Collet Sets for Erickson System

Set

D 1

D 2

L 1

Nominal Size

Standard-No.

Part No. 071016 071017

416 E 417 E

9.50

7.62

25.50 30.40

0.50 - 6.00 0.50 - 10.00

13.50

11.43

Collets for Erickson System

Collet

Diameter Range

Nominal Size

Part No. 071355 071356 071357 071358 071359 071360 071361 071362 071363 071364 071365 071368 071369 071370 071371 071372 071373 071374 071375 071376 071377 071378 071379 071380 071381 071382 071383 071384 071385 071681

6 6 6 6 6 6 6 6 6 6 6

0.50 - 1.00 1.00 - 1.50 1.50 - 2.00 2.00 - 2.50 2.50 - 3.00 3.00 - 3.50 3.50 - 4.00 4.00 - 4.50 4.50 - 5.00 5.00 - 5.50 5.50 - 6.00 0.50 - 1.00 1.00 - 1.50 1.50 - 2.00 2.00 - 2.50 2.50 - 3.00 3.00 - 3.50 3.50 - 4.00 4.00 - 4.50 4.50 - 5.00 5.00 - 5.50 5.50 - 6.00 6.00 - 6.50 6.50 - 7.00 7.00 - 7.50 7.50 - 8.00 8.00 - 8.50 8.50 - 9.00 9.00 - 9.50 9.50 - 10.00

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

B10-I: 14

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

BORING | Modular Tool Holders

Accessories for Collet Chucks ISO 10897-A (DIN 6388-A)

L 1

D 2

D 1

Collet Sets

Set

D 2

L 1

D 1

Nominal Size

Standard-No.

Part No. 071003 071004 071019

A 16 A 25 A 32

410 E 444 E 450 E

22.65 32.90 41.30

40.00 52.00 60.00

2.00 - 16.00 2.00 - 25.00 4.00 - 32.00

Collets

Diameter

D 1

Nominal Size

Part No. 071140 071141 071142 071143 071144 071145 071146 071147 071148 071149 071150 071151 071152 071153 071154 071155 071156 071157 071158 071159 071160 071161 071162 071163 071164 071165 071166 071167 071168

A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16 A 16

2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00 8.50 9.00 9.50

10.00 10.50 11.00 11.50 12.00 12.50 13.00 13.50 14.00 14.50 15.00 15.50 16.00

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-I: 15

BORING | Modular Tool Holders

Accessories for Collet Chucks ISO 10897-A (DIN 6388-A)

D 1

Collets

Diameter

D 1

Nominal Size

Part No. 071169 071170 071171 071172 071173 071174 071175 071176 071177 071178 071179 071180 071181 071182 071183 071184 071185 071186 071187 071188 071189 071190 071191 071192 071612 071419 071420 071613 071421 071614 071422 071666 071423 071667 071668 071669 071424 071670 071665 071671 071416 071672 071673 071674 071675 071417 071676 071677 071678 071679 071633 071680 071418

A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32

2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00

10.00 11.00 12.00 13.00 14.00 15.00 16.00 17.00 18.00 19.00 20.00 21.00 22.00 23.00 24.00 25.00 10.00 11.00 12.00 13.00 14.00 15.00 16.00 17.00 18.00 19.00 20.00 21.00 22.00 23.00 24.00 25.00 26.00 27.00 28.00 29.00 30.00 31.00 32.00 4.00 5.00 6.00 7.00 8.00 9.00

INDEX

B10-I: 16

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

BORING | Modular Tool Holders

Accessories for Collet Chucks ISO 10897-B (DIN 6388-B)

L 1

D 2

D 1

Collet Sets

Set

D 2

L 1

D 1

Nominal Size

Standard-No.

Part No. 071005 071006 071022

B 16 B 25 B 32

415 E 462 E 467 E

22.65 32.90 41.30

40.00 52.00 60.00

1.50 - 16.00 3.50 - 25.00 5.50 - 32.00

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-I: 17

BORING | Modular Tool Holders

Accessories for Collet Chucks ISO 10897-B (DIN 6388-B)

D 1

Collets

Diameter

D 1

Nominal Size

Part No. 071627 071628 071218 071219 071220 071221 071222 071223 071224 071225 071226 071227 071228 071229 071230 071231 071232 071233 071234 071235 071236 071237 071238 071239 071240 071241 071242 071243 071244 071245 071246 071247 071248 071249 071250 071251 071252 071253 071254 071255 071256 071257 071258

B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25 B 25

3.50 - 4.00 4.00 - 4.50 4.50 - 5.00 5.00 - 5.50 5.50 - 6.00 6.00 - 6.50 6.50 - 7.00 7.00 - 7.50 7.50 - 8.00 8.00 - 8.50 8.50 - 9.00 9.00 - 9.50 9.50 - 10.00 10.00 - 10.50 10.50 - 11.00 11.00 - 11.50 11.50 - 12.00 12.00 - 12.50 12.50 - 13.00 13.00 - 13.50 13.50 - 14.00 14.00 - 14.50 14.50 - 15.00 15.00 - 15.50 15.50 - 16.00 16.00 - 16.50 16.50 - 17.00 17.00 - 17.50 17.50 - 18.00 18.00 - 18.50 18.50 - 19.00 19.00 - 19.50 19.50 - 20.00 20.00 - 20.50 20.50 - 21.00 21.00 - 21.50 21.50 - 22.00 22.00 - 22.50 22.50 - 23.00 23.00 - 23.50 23.50 - 24.00 24.00 - 24.50 24.50 - 25.00

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

B10-I: 18

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

BORING | Modular Tool Holders

Accessories for Collet Chucks ISO 10897-B (DIN 6388-B)

D 1

Collets

Diameter

D 1

Nominal Size

Part No. 071686 071687 071688 071689 071690 071691 071692 071693 071542 071543 071544 071545 071546 071547 071548 071549 071550 071551 071552 071553 071554 071555 071556 071557 071558 071559 071560 071561 071562 071563 071564 071565 071566 071567 071568 071569 071570 071571 071572 071573 071574 071575 071576 071577 071578 071579 071580 071581 071582 071583 071584 071585 071586

B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32 B 32

5.50 - 6.00 6.00 - 6.50 6.50 - 7.00 7.00 - 7.50 7.50 - 8.00 8.00 - 8.50 8.50 - 9.00 9.00 - 9.50 9.50 - 10.00 10.00 - 10.50 10.50 - 11.00 11.00 - 11.50 11.50 - 12.00 12.00 - 12.50 12.50 - 13.00 13.00 - 13.50 13.50 - 14.00 14.00 - 14.50 14.50 - 15.00 15.00 - 15.50 15.50 - 16.00 16.00 - 16.50 16.50 - 17.00 17.00 - 17.50 17.50 - 18.00 18.00 - 18.50 18.50 - 19.00 19.00 - 19.50 19.50 - 20.00 20.00 - 20.50 20.50 - 21.00 21.00 - 21.50 21.50 - 22.00 22.00 - 22.50 22.50 - 23.00 23.00 - 23.50 23.50 - 24.00 24.00 - 24.50 24.50 - 25.00 25.00 - 25.50 25.50 - 26.00 26.00 - 26.50 26.50 - 27.00 27.00 - 27.50 27.50 - 28.00 28.00 - 28.50 28.50 - 29.00 29.00 - 29.50 29.50 - 30.00 30.00 - 30.50 30.50 - 31.00 31.00 - 31.50 31.50 - 32.00

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-I: 19

BORING | Modular Tool Holders

Accessories for Collet Chucks ISO 10897-A (DIN 6388-A)

L 1

D 2

D 1

Collet Sets for Clarkson System

Diameter

Collet Set

D 1

D 2

L 1

Nominal Size

Standard-No.

Part No. 071013 071014 071020

A 16 A 25 A 32

421 E 459 E 460 E

6.00 - 12.00 6.00 - 25.00 6.00 - 32.00

22.65 32.90 41.30

42.00 52.00 63.00

NOTE : Recommended to use clamping nuts with ball bearings to lock collets.

Collets for Clarkson System

Diameter

D 1

Nominal Size

Part No. 071304 071305 071306 071307 071308 071309 071310 071311 071312 071313 071684 071427 071428 071429 071430 071431 071432 071433 071685

A 16 A 16 A 16 A 16 A 25 A 25 A 25 A 25 A 25 A 25 A 25 A 32 A 32 A 32 A 32 A 32 A 32 A 32 A 32

6.00 8.00

10.00 12.00

6.00 8.00

10.00 12.00 16.00 20.00 25.00 10.00 12.00 16.00 20.00 25.00 32.00 6.00 8.00

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

B10-I: 20

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

BORING | Modular Tool Holders

Accessories for Collet Chucks ISO 15488-B (DIN 6499-B)

D 2

D 1

Collet Sets

Diameter

Collet Set

D 1

D 2

L 1

Nominal Size

Standard-No.

Part No. 071034 071028 071029 071031 071032 071033

ER 8

4004 E 4008 E

1.00 - 5.00 1.00 - 7.00 0.50 - 10.00 1.50 - 16.00 2.00 - 20.00 3.00 - 26.00

8.50

13.50 18.00 27.50 34.00 40.00 46.00

ER 11 ER 16 ER 25 ER 32 ER 40

11.00 16.00 25.00 32.00 40.00

426 E 430 E 470 E 472 E

Collets

Diameter

D 1

Nominal Size

Part No. 071986 071987 071988 071989 071990 071991 071992 071993 071994 071700 071701 071702 071703 071704 071705 071706 071707 071708 071709 071710 071711 071712

ER 8 ER 8 ER 8 ER 8 ER 8 ER 8 ER 8 ER 8 ER 8

1.00 1.50 2.00 2.50

2.60 - 3.00 3.10 - 3.50 3.60 - 4.00 4.10 - 4.50 4.60 - 5.00

ER 11 ER 11 ER 11 ER 11 ER 11 ER 11 ER 11 ER 11 ER 11 ER 11 ER 11 ER 11 ER 11

1.00 1.50 2.00 2.50

2.60 - 3.00 3.10 - 3.50 3.60 - 4.00 4.10 - 4.50 4.60 - 5.00 5.10 - 5.50 5.60 - 6.00 6.10 - 6.50 6.60 - 7.00

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-I: 21

BORING | Modular Tool Holders

Accessories for Collet Chucks ISO 15488-B (DIN 6499-B)

D 1

Collets

Diameter

D 1

Nominal Size

Part No. 071713 071714* 071715 071716* 071717 071718* 071719 271132* 071720 271133* 071721 271134* 071722 271135* 071723 271136* 071724 271137* 071725

ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16 ER 16

0.50 - 1.00 1.00 - 1.50 1.00 - 2.00 2.00 - 2.50 2.50 - 3.00 3.00 - 3.50 3.50 - 4.00 4.00 - 4.50 4.00 - 5.00 5.00 - 5.50 5.50 - 6.00 6.00 - 6.50 6.00 - 7.00 7.00 - 7.50 7.50 - 8.00 8.00 - 8.50 8.50 - 9.00 9.00 - 9.50 9.00 - 10.00

* Items not contained in set.

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

B10-I: 22

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

BORING | Modular Tool Holders

Accessories for Collet Chucks ISO 15488-B (DIN 6499-B)

D 1

Collets

Diameter

D 1

Nominal Size

Part No. 071743 071744* 071745 271128* 071746 271129* 071747 271130* 071748 271131* 071749 071750 071751 071752 071753 071754 071755 071756 071757 071758 071761 071762 071763 071764 071765 071766 071767 071768 071769 071770 071771 071772 071773 071774 071775 071776 071777 071778 071776 071777 071778

ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32

1.50 - 2.00 2.00 - 2.50 2.50 - 3.00 3.00 - 3.50 3.50 - 4.00 4.00 - 4.50 4.50 - 5.00 5.00 - 5.50 5.50 - 6.00 6.00 - 6.50 6.50 - 7.00 7.00 - 8.00 8.00 - 9.00 9.00 - 10.00 10.00 - 11.00 11.00 - 12.00 12.00 - 13.00 13.00 - 14.00 14.00 - 15.00 15.00 - 16.00 2.00 - 3.00 3.00 - 4.00 4.00 - 5.00 5.00 - 6.00 6.00 - 7.00 7.00 - 8.00 8.00 - 9.00 9.00 - 10.00 10.00 - 11.00 11.00 - 12.00 12.00 - 13.00 13.00 - 14.00 14.00 - 15.00 15.00 - 16.00 16.00 - 17.00 17.00 - 18.00 18.00 - 19.00 19.00 - 20.00 17.00 - 18.00 18.00 - 19.00 19.00 - 20.00

* Items not contained in set.

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-I: 23

BORING | Modular Tool Holders

Accessories for Collet Chucks ISO 15488-B (DIN 6499-B)

D 1

Diameter

D 1

Nominal Size

Part No. 071779 071780 071781 071782 071783 071784 071785 071786 071787 071788 071789 071790 071791 071792 071793 071794 071795 071796 071797 071798 071799 071800 071801

ER 40 ER 40 ER 40 ER 40 ER 40 ER 40 ER 40 ER 40 ER 40 ER 40 ER 40 ER 40 ER 40 ER 40 ER 40 ER 40 ER 40 ER 40 ER 40 ER 40 ER 40 ER 40 ER 40

3.00 - 4.00 4.00 - 5.00 5.00 - 6.00 6.00 - 7.00 7.00 - 8.00 8.00 - 9.00 9.00 - 10.00 10.00 - 11.00 11.00 - 12.00 12.00 - 13.00 13.00 - 14.00 14.00 - 15.00 15.00 - 16.00 16.00 - 17.00 17.00 - 18.00 18.00 - 19.00 19.00 - 20.00 20.00 - 21.00 21.00 - 22.00 22.00 - 23.00 23.00 - 24.00 24.00 - 25.00 25.00 - 26.00

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

B10-I: 24

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

BORING | Modular Tool Holders

Collet Sets for Taps DIN 371/374/376 ISO 15488-B (DIN 6499-B)

L 1

Square Shank

D 2

D 1

Collet Sets

Clamping Range

Collet Set

D 1

D 2

L 1

Nominal Size

Standard-No.

Part No. 071045 071047 071048 071049

ER 16 ER 25 ER 32 ER 40

426 EGB 430 EGB 470 EGB 472 EGB

4.50 - 7.00 4.50 - 12.00 4.50 - 16.00 7.00 - 20.00

16.00 25.00 32.00 40.00

27.50 34.00 40.00 46.00

NOTE: To lock these collets, we recommend using the clamping nuts with sliding ring for higher clamping forces.

Taps

Shank

Tap

D 1

Square Shank

DIN 371

DIN 374 M 6 x... M 7 x... M 8 x...

DIN 376

4.50 5.50 6.00 7.00 8.00 9.00

3.40 4.30 4.90 5.50 6.20 7.00 8.00 9.00 9.00

M 4

M 6 M 7 M 8

M 4,5/5/6

M 7 M 8 M 9

M 9/10 x...

M 9/10

M 6 x... M 6 x...

M 11 M 12

10.00 11.00 12.00 14.00 16.00 18.00 20.00

M 10

M 14 x... M 16 x... M 18 x... M 20 x...

M 14 M 16 M 18 M 20

M 12

11.00 12.00 14.00 16.00

- - - -

M 22/24 x...

M 22/24

M 27 x...

M 27

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-I: 25

BORING | Modular Tool Holders

Accessories for Collet Sets for Taps DIN 371/374/376 ISO 15488-B (DIN 6499-B)

Square Shank

D 1

Suitable Taps

D 1

Nominal Size

Square Shank

Part No. 071901 071902 071903 071904 071912 071913 071914 071915 071916 071917 071918 071919 071920 071921 071922 071923 071924 071925 071926 071927 071928 071929 071930 071931 071932 071933 071934 071935 071936 071937 071938 071939 071940 071941

ER 16 ER 16 ER 16 ER 16 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 25 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 32 ER 40 ER 40 ER 40 ER 40 ER 40 ER 40 ER 40 ER 40 ER 40 ER 40

4.50 5.50 6.00 7.00 4.50 5.50 6.00 7.00 8.00 9.00

3.40 4.30 4.90 5.50 3.40 4.30 4.90 5.50 6.20 7.00 8.00 9.00 9.00 3.40 4.30 4.90 5.50 6.20 7.00 8.00 9.00 9.00 5.50 6.20 7.00 8.00 9.00 9.00 11.00 12.00 11.00 12.00 14.50 16.00

10.00 11.00 12.00

4.50 5.50 6.00 7.00 8.00 9.00

10.00 11.00 12.00 14.00 16.00

7.00 8.00 9.00

10.00 11.00 12.00 14.00 16.00 18.00 20.00

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

B10-I: 26

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

BORING | Modular Tool Holders

Accessories for Collet Chucks: ISO 15488-B (DIN 6499-B) Collets

L 1

D 1

D 2

Collets for Mill CuƩers with Pull Thread System

Clamping Range

Collet

D 2

L 1

D 1

Nominal Size

Standard-No.

Part No. 071052 071053

ER 32 ER 40

470 ECL 472 ECL

32.00 40.00

46.00 52.00

6.00 - 16.00 6.00 - 25.00

Collets

Collet

D 1

Nominal Size

Part No. 071826 071827 071828 071829 071830 071831 071832 071833 071834 071835 071836 071837

ER 32 ER 32 ER 32 ER 32 ER 32 ER 40 ER 40 ER 40 ER 40 ER 40 ER 40 ER 40

6.00 8.00

10.00 12.00 16.00

6.00 8.00

10.00 12.00 16.00 20.00 25.00

NOTE: To lock these collets, we recommend using the clamping nuts with sliding ring for higher clamping forces.

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-I: 27

Accessories for Collet Chucks: ISO 10897 (DIN 6388) Clamping Nuts BORING | Modular Tool Holders

L 1

Clamping Nuts: DIN 6388 / ISO 10897 - 1:10

Clamping Nut

D 1

L 1

Nominal Size

Clamping Range Torque

Part No. 068048 068052 161099

16 25 32

43.00 60.00 72.00

24.00 30.00 33.50

2.00 - 16.00 2.00 - 25.00 4.00 - 32.00

100 Nm 180 Nm 220 Nm

D 1

L 1

Clamping Nuts for Sealing Discs: DIN 6388 / ISO 10897 - 1:10

Clamping Nut

D 1

L 1

Nominal Size

Clamping Range Torque

Part No. 275001 275003 276001

16 25 32

43.00 60.00 72.00

31.50 38.00 42.00

2.00 - 16.00 2.00 - 25.00 4.00 - 32.00

100 Nm 180 Nm 220 Nm

D 1

NOTE: With ball bearing, for use with sealing discs.

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

B10-I: 28

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

BORING | Modular Tool Holders

Accessories for Collet Chucks: ISO 10897 (DIN 6388) Clamping Nuts

L 1

Mini Clamping Nuts

Clamping Nut

D 1

L 1

Nominal Size

Clamping Range

Part No. 415357 415358 415359

Torque

ER 08 ER 11 ER 16

12.00 16.00 22.00

10.80 12.00 18.00

1.00 - 4.00 1.00 - 7.00 1.00 - 10.00

8 Nm

D 1

16 Nm 25 Nm

L 1

Clamping Nuts for Erickson Collet Chuck System

Clamping Nut

D 1

L 1

Nominal Size

Clamping Range

Part No. 162095 162093

14.00 21.00

28.00 36.00

1.00 - 6.50 1.00 - 10.00

D 1

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-I: 29

BORING | Modular Tool Holders

Accessories for Collet Chucks: ISO 15488 (DIN 6499) Clamping Nuts

One Piece Clamping Nuts: DIN 6499 / ISO 15488 - 8°

L 1

Clamping Nut

D 1

L 1

Nominal Size

Clamping Range Torque

Part No. 215922 215924 215925 215926

L 1

ER 16 ER 25 ER 32 ER 40

28.00 42.00 50.00 63.00

17.50 20.00 22.50 25.50

1.00 - 10.00 2.00 - 16.00 2.00 - 20.00 3.00 - 26.00

60 Nm 100 Nm 140 Nm 180 Nm

s25

D 1

Clamping Nuts with Sliding Ring: DIN 6499 / ISO 15488 - 8° Clamping Nut

L 1

D 1

L 1

Nominal Size

Clamping Range Torque

Part No. 315015 315016 315017 315018

L 1

ER 16 ER 25 ER 32 ER 40

28.00 42.00 50.00 63.00

20.30 22.40 25.00 28.30

1.00 - 10.00 2.00 - 16.00 2.00 - 20.00 3.00 - 26.00

60 Nm 100 Nm 140 Nm 180 Nm

D 1

s25

One Piece Clamping Nuts for use with Sealing Disks: DIN 6499 / ISO 15488 - 8° Clamping Nut

L 1

D 1

L 1

Nominal Size

Clamping Range Torque

Part No. 277001 277005 277007 278001

L 1

ER 16 ER 25 ER 32 ER 40

28.00 42.00 50.00 63.00

25.00 27.50 30.50 34.00

1.00 - 10.00 2.00 - 16.00 2.00 - 20.00 3.00 - 26.00

60 Nm 100 Nm 140 Nm 180 Nm

D 1

s25

D 1

Clamping Nuts with Sliding Ring for use with Sealing Disks: DIN 6499 / ISO 15488 - 8° Clamping Nuts: ISO 15488 (DIN 6499)

L 1

D 1

L 1

Nominal Size

Clamping Range Torque

Part No. 277002 277006 277008 278002

L 1

ER 16 ER 25 ER 32 ER 40

28.00 42.00 50.00 63.00

25.00 28.50 31.50 35.00

1.00 - 10.00 2.00 - 16.00 2.00 - 20.00 3.00 - 26.00

60 Nm 100 Nm 140 Nm 180 Nm

D 1

s25

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

B10-I: 30

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

BORING | Modular Tool Holders

Sealing Disks for Collet Chucks: ISO 10897 (DIN 6388)

Sealing Disk

Nominal Size Diameter

Part No. 275010 275011 275012 275013 275014 275015 275016 275040 275041 275042 275043 275044 275045 275046 275047 275048 275049 275050 275051 276005 276006 276007 276008 276009 276010 276011 276012 276013 276014 276015 276016 276017 276018 276019

Diameter 6.00 - 6.50 6.50 - 7.00 7.00 - 7.50 7.50 - 8.00 8.00 - 8.50 8.50 - 9.00 9.00 - 9.50 8.50 - 9.00 9.00 - 9.50 9.50 - 10.00 10.00 - 10.50 10.50 - 11.00 11.00 - 11.50 11.50 - 12.00 12.00 - 12.50 12.50 - 13.00 13.00 - 13.50 13.50 - 14.00 14.00 - 14.50 11.00 - 11.50 11.50 - 12.00 12.00 - 12.50 12.50 - 13.00 13.00 - 13.50 13.50 - 14.00 14.00 - 14.50 14.50 - 15.00 15.00 - 15.50 15.50 - 16.00 16.00 - 16.50 16.50 - 17.00 17.00 - 17.50 17.50 - 18.00 18.00 - 18.50

Part No. 275017 275018 275019 275020 275021 275022 275023 275052 275053 275054 275055 275056 275057 275058 275059 275060 275061 275062 275063 276020 276021 276022 276023 276024 276025 276026 276027 276028 276029 276030 276031 276032 276033 276034

Diameter

Part No. 275024 275025 275026 275027 275028 275029 275030 275064 275065 275066 275067 275068 275069 275070 275071 275072 275073 275074 275075 276035 276036 276037 276038 276039 276040 276041 276042 276043 276044 276045 276046 276047 276048 276049

Diameter

Part No. 275031 275032 275033 275034 275035 275036 275076 275077 275078 275079 275080 275081 275082 275083 275084 276050 276051 276052 276053 276054 276055 276056 276057 276058 276059 276060 276061 - - - -

16 16 16 16 16 16 16 25 25 25 25 25 25 25 25 25 25 25 25 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32

2.50 - 3.00 3.00 - 3.50 3.50 - 4.00 4.00 - 4.50 4.50 - 5.00 5.00 - 5.50 5.50 - 6.00 2.50 - 3.00 3.00 - 3.50 3.50 - 4.00 4.00 - 4.50 4.50 - 5.00 5.00 - 5.50 5.50 - 6.00 6.00 - 6.50 6.50 - 7.00 7.00 - 7.50 7.50- 8.00 8.00 - 8.50 3.50 - 4.00 4.00 - 4.50 4.50 - 5.00 5.00 - 5.50 5.50 - 6.00 6.00 - 6.50 6.50 - 7.00 7.00 - 7.50 7.50 - 8.00 8.00 - 8.50 8.50 - 9.00 9.00 - 9.50 9.50 - 10.00 10.00 - 10.50 10.50 - 11.00

9.50 - 10.00 10.00 - 10.50 10.50 - 11.00 11.00 - 11.50 11.50 - 12.00 12.00 - 12.50 12.50 - 13.00 14.50 - 15.00 15.00 - 15.50 15.50 - 16.00 16.00 - 16.50 16.50 - 17.00 17.00 - 17.50 17.50 - 18.00 18.00 - 18.50 18.50 - 19.00 19.00 - 19.50 19.50 - 20.00 20.00 - 20.50 18.50 - 19.00 19.00 - 19.50 19.50 - 20.00 20.00 - 20.50 20.50 - 21.00 21.00- 21.50 21.50 - 22.00 22.00 - 22.50 22.50 - 23.00 23.00 - 23.50 23.50 - 24.00 24.00 - 24.50 24.50 - 25.00 25.00 - 25.50 25.50 - 26.00

13.00 - 13.50 13.50 - 14.00 14.00 - 14.50 14.50 - 15.00 15.00 - 15.50 15.50 - 16.00 20.50 - 21.00 21.00 - 21.50 21.50 - 22.00 22.00 - 22.50 22.50 - 23.00 23.00 - 23.50 23.50 - 24.00 24.00 - 24.50 24.50 - 25.00 26.00 - 26.50 26.50 - 27.00 27.50 - 28.00 27.50 - 28.00 28.00 - 28.50 28.50 - 29.00 29.00 - 29.50 29.50 - 30.00 30.00 - 30.50 30.50 - 31.00 31.00 - 31.50 31.50 - 32.00 - - - -

- - -

B10-M: 12-13

B10: VI-VII

Key on B10-I: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-I: 31

Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46

Made with FlippingBook - Online Brochure Maker