B10-WHL_EU-EN

BORING | Accessories / Technical InformaƟon

Guidelines for Not Exceeding Recommended Length-to-Diameter RaƟo To calculate, see graphics below:

A

B

62 mm

Tool Steel Components

63.5 mm

109 mm

C

2

3

1

Ø32

Ø40

Ø50

D

NOTE : Length-to-diameter raƟo is calculated using body diameters not cuƫng diameter. NOTE : When using steel components, do not exceed recommended 6xD length-to-diameter raƟo or exceed four total components (including shank).

Step 1: Find L : D by component. 1.2 = 62/50 1

Step 2: Add each L : D average. 1.2 2.7 2.0 + 5.9 = L : D raƟo

E

2.7 = 109/40 2.0= 63.5/32

2

3

F

G

Heavy Metal Components

62 mm

H

63.5 mm

154 mm

1

2

3

I

Ø32

Ø42

Ø50

J

NOTE : Length-to-diameter raƟo is calculated using body diameters not cuƫng diameter. NOTE : When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo or exceed four total components (including shank).

Step 1: Find L : D by component. 1.2 = 62/50 1

Step 2: Add each L : D average. 1.2 3.6 2.0 + 6.8= L : D raƟo

K

3.6 = 154/42 2.0 = 63.5/32

2

3

L

Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed four total components (including shank). -When using Alu-Line components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo. WARNING

M

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH® module, do not exceed recommended 10xD length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-M: 9