B10-WHL

BORING | Master Shanks with MVS Connection

HSK Master Shanks (DIN 69893) Balanced

A

*X 1 : with one-piece clamping nut

Imperial (in)

Taper Size

MVS Connection

Shank

D

D 4 | D 3 40 - 22 50 - 28 40 - 22 50 - 28 25 - 14 32 - 18 40 - 22 50 - 28 63 - 36 80 - 36 ER 40 50 - 28 50 - 28*

X 1

L 1

L 2

D 5 — — — — — — — — — — — — — — — — — —

Weight (lbs)

Part No. 246016 246004 246015 245011 246012 246013 246014 245012 245013 246009 245014 246020 246021 245015 246019 246022 245016 246018 246023 246010 246017 252090** 252091**

2.205 2.756 2.205 2.559 1.811 2.205 2.205 2.559 3.150 3.150 4.724 2.559 7.087 7.087 3.150 8.071 8.071 3.150 10.03 10.03 3.937

— —

— — — — — — — — — — — — — — — — — — — — —

0.881 1.543 1.322 1.763 1.543 1.763 1.764 2.425 3.306 4.629 3.747 5.291

40

1.181

50

—

0.787 1.181 1.181 1.535 3.700 1.417 5.944 5.944 2.007 6.929 6.929 2.007 8.897 8.897 — —

63

3.740

2.480

2.362

11.020 6.393 6.393 17.190 17.190 8.157 27.770 22.920 11.020 38.580 7.716

63 - 36

3.070

100

80 - 36

3.543

— —

100 - 56

11.810 4.724

ER 40

3.582

3.464

2.480

NOTE: Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg. * D 4 = 49.50 mm ** Balanced without clamping nut.

NOTE: Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com . -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter ratio, which can impact tool stability and performance. For detailed guidelines on safe configurations, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines. WARNING Assembly of modular components may cause machine damage and/or serious injury. To prevent:

B10: ix - x Key on B10-A: 2

= Metric (mm) = Imperial (in)

www.alliedmachine.com | 1.330.343.4283

B10-A: 6